Author

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 382. (Read 2171056 times)

hero member
Activity: 588
Merit: 500
Does anybody work on a mobile wallet app?

Why don't u give it a shot? Get one of your devs to go for it.
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)
Does anybody work on a mobile wallet app?
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)
At the moment I cannot reach mining.tompool.org:82
Is it just me or is the site not reachable.
The last Current Block  was shown with 71547
while mininghere.com:8001 shows 71734

BTW, how can I figure out what time Block 71547 was handled (just to know how long the site was not reachable)?
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)
Is anybody interested in a Daily Joke subscription?
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)
Our subscription project Zodiac passed the last days' tests!

Daily Horoscope as subscription:

Aquarius BURST-7L8Y-72ZX-LFXS-EM5G5
Aries BURST-QSWP-KVXE-CH4H-4Y72D
Cancer BURST-42ZD-YBNF-B82N-4LFFE
Capricorn BURST-RBDA-7VVS-ACP8-772KB
Gemini BURST-82ZJ-BQA9-7F7Z-EXQG7
Leo BURST-AFCL-8H35-HXCQ-986JZ
Libra BURST-QNWB-YCCS-7CU7-CF4P7
Pisces BURST-R9PF-W7G7-CAX7-AZGKR
Sagittarius BURST-RQ54-ZVTT-XFED-456PR
Scorpio BURST-7EEH-9ZCD-CHF8-FQBPU
Taurus BURST-TWSX-SYWB-RPQD-CENSW
Virgo BURST-KW5D-EAQ2-VC6U-8P5XZ

Subscription cost 10 Bursts and it should be setup for daily (24x3600 seconds =) 86,400 seconds

How to subscribe:
1. open your wallet
2. click on the tab Transaction and sub tab Subscriptions (at the left hand menu)
3. click on the button Create Subscription (at the right upper corner)
4. enter the BURST address from above for your Zodiac sign
5. use as amount 10 BURST
6. click on the button Create Subscription

The IFs:
If you use an amount lower than 10 BURSTs, the daily amounts will be counted as donation.
THANK YOU!

If you use as amount 10 BURSTs, the system will send you daily at this time of the day a message with your subscribed Zodiac message.

If you use an amount more than 10 BURSTs, the system will count the amount above 10 BURSTs as donation.
THANK YOU!

If you use another seconds amount then 86,400 seconds, then the subscription will be shorter or longer. You may receive multiple times the same message, or missing some day's message.

You can cancel any time!


How it works.
Whenever the system finds an incoming amount of 10 or more BURSTs then it will send the message of the day out to the subscriber.


Remember, mining reward is getting less every month by 5%. Transaction fee is therefore important to keep the miners going. Participate in this/any BURST project.
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)
Maybe plots could at least store the Blockchain in a future version ?

You have no idea how much I want that....The ultimate trim!!!

Everybody, watch out for this asset: Petabyte

Sell order from issuer @179k Burst....which equates to $81USD/TB...If anyone thinks that they'll ROI at that price....well, ur not. Don't know how Elmit is selling this...obviously the buyers are idiots and don't research anything.

Asset Issuer offers for 180,000 and 180,100 (That is the line where it says "Asset Issuer") that was a fair price at the time:
170 US$ a 4 TB hard disk at 0.00000080 to 0.00000100 Burst/BTC and 250 US$/BTC

It pays also dividends! Didn't you notice your payout of about 17,000 Bursts. Not bad for your proposed price of 18,000 Bursts per 1 TB hard disk space.

We CALCULATE the asset price. And with all assets (or stock) the market dictates the trading price.

Therefore:
Do you have BURSTs in your wallet? How much interests do you get? If none, then buy assets:
Open your wallet, click on Asset Exchange
Add Asset with the ID: 14668748687827404894
Buy assets, as you can afford it.
Relax and get paid as we mine for you.

... but sure you can just watch your wallet.
legendary
Activity: 2450
Merit: 1002
Hehe, I also have a good connection:



And mr. GenTarkin, password section is for your Burst wallet passphrase. It is 100% required!
K, I put my passphrase there, same error.

Nevermind, apparently names cant have anything but letters and numbers lol... not even _ is alloewd
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)

*sign* just changed back to give it another try, and the response time of the server is very bad, including timeouts etc...
I really like the frontend, but can you maybe get someone who is able to setup a stable unix server? there are under 50 miners on the server and it looks like the backend is already burning.

I begin to hate that 4 confirmation thing when switching pools...

Cat is a most capable Linux/Unix dev. Dunno about speed...this thing barely touches server resources...50 miners? Try 250!! Are you sure that you're on BURST.NINJA?

Obviously he is on the new "FRONTEND", it is the only pool which looks like the old tv test page, ... hehehehe
I also think that a *nix server is much better suitable than Windows.

Our pool keeps all on Linux, even my desktop is Linux.
hero member
Activity: 785
Merit: 500
BURST got Smart Contracts (AT)
Maybe plots could at least store the Blockchain in a future version ?

You have no idea how much I want that....The ultimate trim!!!

Everybody, watch out for this asset: Petabyte

Sell order from issuer @179k Burst....which equates to $81USD/TB...If anyone thinks that they'll ROI at that price....well, ur not. Don't know how Elmit is selling this...obviously the buyers are idiots and don't research anything.

Interesting!
Petabyte keeps it's value. YOU got even some! So you must be very happy! If you think it is not worth it, then sell it!!! or transfer it with your proposed 18,000
legendary
Activity: 2450
Merit: 1002
Hehe, I also have a good connection:



And mr. GenTarkin, password section is for your Burst wallet passphrase. It is 100% required!
K, I put my passphrase there, same error.
legendary
Activity: 2450
Merit: 1002
Im trying to create a crowdsource through the AT interface. It just says 'error sending transaction' ... what could be wrong?
Also what is the password field used for? (error happens whether I put one or not)

To create a CF you need to have a burst account and have at least some bursts to cover the ATs creation fees (less than 10 bursts).  Also name is not allowed to have spaces.

I meet all those requirements =)
hero member
Activity: 588
Merit: 500
Hehe, I also have a good connection:



And mr. GenTarkin, password section is for your Burst wallet passphrase. It is 100% required!
sr. member
Activity: 249
Merit: 250
Say I wanted to give mining Burst a try, would I need to use an internal HDD, or would an external USB-harddrive of 1 or 2 TB also do?
USB2.0 is a bit slow for Burst Mining , use USB3.0 or SATA connection! And if the external HDD is USB 2.0... you can always dissemble the external case and use it as internal! Smiley

I have an external USB 3 HDD of 1 TB, so might look into it this weekend. Internal HDD only got around 100 GB of free space, so I guess that's not worth trying Wink.
full member
Activity: 207
Merit: 100
Say I wanted to give mining Burst a try, would I need to use an internal HDD, or would an external USB-harddrive of 1 or 2 TB also do?
USB2.0 is a bit slow for Burst Mining , use USB3.0 or SATA connection! And if the external HDD is USB 2.0... you can always dissemble the external case and use it as internal! Smiley

EDIT: DaWallet i PM'd you a few days ago, can you response me? Cheesy
hero member
Activity: 539
Merit: 500
No drops for me either:

Code:
Reply from 192.198.95.54: bytes=32 time=63ms TTL=46
Reply from 192.198.95.54: bytes=32 time=56ms TTL=46
Reply from 192.198.95.54: bytes=32 time=62ms TTL=46
Reply from 192.198.95.54: bytes=32 time=53ms TTL=46
Reply from 192.198.95.54: bytes=32 time=58ms TTL=46

Ping statistics for 192.198.95.54:
    Packets: Sent = 769, Received = 769, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 53ms, Maximum = 153ms, Average = 57ms
newbie
Activity: 36
Merit: 0

*sign* just changed back to give it another try, and the response time of the server is very bad, including timeouts etc...
I really like the frontend, but can you maybe get someone who is able to setup a stable unix server? there are under 50 miners on the server and it looks like the backend is already burning.

I begin to hate that 4 confirmation thing when switching pools...

Cat is a most capable Linux/Unix dev. Dunno about speed...this thing barely touches server resources...50 miners? Try 250!! Are you sure that you're on BURST.NINJA?

yes, I'm @ burst.ninja (192.198.95.54) and there are timeouts all over the place. With the 50 miners, I was refering to:

Code:
Miners Responded	 34

Edit:

Code:
PING burst.ninja (192.198.95.54) 56(84) bytes of data.
64 bytes from 192.198.95.54: icmp_seq=4 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=7 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=9 ttl=51 time=150 ms
64 bytes from 192.198.95.54: icmp_seq=14 ttl=51 time=150 ms
64 bytes from 192.198.95.54: icmp_seq=16 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=23 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=25 ttl=51 time=150 ms

--- burst.ninja ping statistics ---
26 packets transmitted, 7 received, 73% packet loss, time 25123ms

Code:
PING burst.poolto.be (5.9.23.116) 56(84) bytes of data.
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=1 ttl=56 time=37.3 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=2 ttl=56 time=40.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=3 ttl=56 time=38.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=4 ttl=56 time=38.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=5 ttl=56 time=37.9 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=6 ttl=56 time=38.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=7 ttl=56 time=38.4 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=8 ttl=56 time=38.8 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=9 ttl=56 time=39.5 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=10 ttl=56 time=39.8 ms

--- burst.poolto.be ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9013ms

if i'm the only one with problems it might be the connection from my location to your server :/

Code:
u0_a100@mako:/ $ ping 192.198.95.54
PING 192.198.95.54 (192.198.95.54) 56(84) bytes of data.
64 bytes from 192.198.95.54: icmp_seq=1 ttl=46 time=138 ms
64 bytes from 192.198.95.54: icmp_seq=2 ttl=46 time=141 ms
64 bytes from 192.198.95.54: icmp_seq=3 ttl=46 time=141 ms
64 bytes from 192.198.95.54: icmp_seq=4 ttl=46 time=146 ms
64 bytes from 192.198.95.54: icmp_seq=5 ttl=46 time=146 ms
64 bytes from 192.198.95.54: icmp_seq=6 ttl=46 time=143 ms
64 bytes from 192.198.95.54: icmp_seq=7 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=8 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=9 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=10 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=11 ttl=46 time=146 ms
64 bytes from 192.198.95.54: icmp_seq=12 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=13 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=14 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=15 ttl=46 time=139 ms
64 bytes from 192.198.95.54: icmp_seq=16 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=17 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=18 ttl=46 time=144 ms
64 bytes from 192.198.95.54: icmp_seq=19 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=20 ttl=46 time=143 ms
64 bytes from 192.198.95.54: icmp_seq=21 ttl=46 time=144 ms
64 bytes from 192.198.95.54: icmp_seq=22 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=23 ttl=46 time=146 ms
64 bytes from 192.198.95.54: icmp_seq=24 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=25 ttl=46 time=142 ms
64 bytes from 192.198.95.54: icmp_seq=26 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=27 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=28 ttl=46 time=145 ms
64 bytes from 192.198.95.54: icmp_seq=29 ttl=46 time=143 ms
^C
--- 192.198.95.54 ping statistics ---
29 packets transmitted, 29 received, 0% packet loss, time 28066ms
rtt min/avg/max/mdev = 138.764/143.860/146.728/2.109 ms

No timeout for me on 3 try.
full member
Activity: 137
Merit: 100
AT - Automated Transactions - CIYAM Developer
Im trying to create a crowdsource through the AT interface. It just says 'error sending transaction' ... what could be wrong?
Also what is the password field used for? (error happens whether I put one or not)

To create a CF you need to have a burst account and have at least some bursts to cover the ATs creation fees (less than 10 bursts).  Also name is not allowed to have spaces.
legendary
Activity: 2450
Merit: 1002
Im trying to create a crowdsource through the AT interface. It just says 'error sending transaction' ... what could be wrong?
Also what is the password field used for? (error happens whether I put one or not)
legendary
Activity: 914
Merit: 1001

*sign* just changed back to give it another try, and the response time of the server is very bad, including timeouts etc...
I really like the frontend, but can you maybe get someone who is able to setup a stable unix server? there are under 50 miners on the server and it looks like the backend is already burning.

I begin to hate that 4 confirmation thing when switching pools...

Cat is a most capable Linux/Unix dev. Dunno about speed...this thing barely touches server resources...50 miners? Try 250!! Are you sure that you're on BURST.NINJA?

yes, I'm @ burst.ninja (192.198.95.54) and there are timeouts all over the place. With the 50 miners, I was refering to:

Code:
Miners Responded	 34

Edit:

Code:
PING burst.ninja (192.198.95.54) 56(84) bytes of data.
64 bytes from 192.198.95.54: icmp_seq=4 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=7 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=9 ttl=51 time=150 ms
64 bytes from 192.198.95.54: icmp_seq=14 ttl=51 time=150 ms
64 bytes from 192.198.95.54: icmp_seq=16 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=23 ttl=51 time=151 ms
64 bytes from 192.198.95.54: icmp_seq=25 ttl=51 time=150 ms

--- burst.ninja ping statistics ---
26 packets transmitted, 7 received, 73% packet loss, time 25123ms

Code:
PING burst.poolto.be (5.9.23.116) 56(84) bytes of data.
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=1 ttl=56 time=37.3 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=2 ttl=56 time=40.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=3 ttl=56 time=38.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=4 ttl=56 time=38.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=5 ttl=56 time=37.9 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=6 ttl=56 time=38.0 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=7 ttl=56 time=38.4 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=8 ttl=56 time=38.8 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=9 ttl=56 time=39.5 ms
64 bytes from staff.anonxcorp.com (5.9.23.116): icmp_seq=10 ttl=56 time=39.8 ms

--- burst.poolto.be ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9013ms

if i'm the only one with problems it might be the connection from my location to your server :/
hero member
Activity: 588
Merit: 500

*sign* just changed back to give it another try, and the response time of the server is very bad, including timeouts etc...
I really like the frontend, but can you maybe get someone who is able to setup a stable unix server? there are under 50 miners on the server and it looks like the backend is already burning.

I begin to hate that 4 confirmation thing when switching pools...

Cat is a most capable Linux/Unix dev. Dunno about speed...this thing barely touches server resources...50 miners? Try 250!! Are you sure that you're on BURST.NINJA?
Jump to: