Pages:
Author

Topic: Z9 list of working pools/Fork updates - page 29. (Read 36882 times)

jr. member
Activity: 56
Merit: 1
June 28, 2018, 09:21:04 AM
Is anyone else seeing issues in MPH with ZEN? Was running fine for a few days, but woke up this AM to rapidly declining payouts.
Looking at their site, maybe something is wrong with the ZEN pool or MPH because the last block they found was 8 hours ago.
newbie
Activity: 2
Merit: 0
June 28, 2018, 09:00:41 AM
Is anyone else seeing issues in MPH with ZEN? Was running fine for a few days, but woke up this AM to rapidly declining payouts.
jr. member
Activity: 56
Merit: 2
June 28, 2018, 08:14:59 AM
Has anyone been sucessfull w/ bitcoin interest? if so please tell config


I'm mining it with 100% accepted shares on official BCI mining pool. Tried SuperNova too, but getting 100% rejected shares on their BCI pool.

antpool ?
newbie
Activity: 13
Merit: 0
June 28, 2018, 07:19:15 AM
Has anyone been sucessfull w/ bitcoin interest? if so please tell config


I'm mining it with 100% accepted shares on official BCI mining pool. Tried SuperNova too, but getting 100% rejected shares on their BCI pool.
newbie
Activity: 91
Merit: 0
June 28, 2018, 05:26:48 AM
Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.
Do you think you can run 2 x Z9's overclocked to 675 from one APW3++?
Thanks


yes, you can
newbie
Activity: 168
Merit: 0
June 28, 2018, 05:17:23 AM
Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.
Do you think you can run 2 x Z9's overclocked to 675 from one APW3++?
Thanks
newbie
Activity: 91
Merit: 0
June 27, 2018, 11:20:55 PM
thx So safe to say 360w~ with an OC?

406 watss with 750 mh OC  fan 100%  temp 50-53
396 watts with 750 mh OC   auto fan   temp 60-65
newbie
Activity: 35
Merit: 0
June 27, 2018, 11:03:01 PM
thx So safe to say 360w~ with an OC?
newbie
Activity: 31
Merit: 0
June 27, 2018, 10:45:59 PM
Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.
newbie
Activity: 35
Merit: 0
June 27, 2018, 10:31:44 PM
Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?
jr. member
Activity: 147
Merit: 1
June 27, 2018, 08:24:38 PM
Z9 working on Luxor Mining now (PPS 3%)

Here are their setup guide :

https://medium.com/@LuxorTechTeam/antminer-z9-mini-zcash-miner-setup-guide-d11ea095de9a
jr. member
Activity: 267
Merit: 4
jrc209
June 27, 2018, 08:14:44 PM
Has anyone been sucessfull w/ bitcoin interest? if so please tell config
newbie
Activity: 14
Merit: 0
June 27, 2018, 07:51:26 PM
Just ran 24 hours on Antpool PPLNS with one z9 mini oc to 750MHz.  I have mined 0.14004336 ZEC which is about $22.64 USD
16.42 avg Ksol.  9401 accepted and 50699 discarded.

I just received my 2nd z9 mini today and it is running on Flypool oc to 750Mhz.  I plan to compare them tomorrow.



I am interested in your results. I've been on flypool 22 hours now and have mined 1.36 ZEC. OCed to 650. Haven't had any invalid shares yet.
You mean 0.136 ZEC?

Yes, my bad. About at 24 hours now and at 0.145 now.
jr. member
Activity: 56
Merit: 1
June 27, 2018, 07:24:58 PM
us-east.equihash-hub.miningpoolhub.com:17023 works very well for ZEC, ZCL an ZEN.  BTG does not appear to be active on the switching port.

The MPH 17023 autoswitch port is also working well for me.

it worked for me too, but the amount mined was so low.  i got like .001 btc after 18 hours.
member
Activity: 91
Merit: 10
June 27, 2018, 06:50:54 PM
us-east.equihash-hub.miningpoolhub.com:17023 works very well for ZEC, ZCL an ZEN.  BTG does not appear to be active on the switching port.

The MPH 17023 autoswitch port is also working well for me.
newbie
Activity: 4
Merit: 0
June 27, 2018, 06:50:42 PM
I overclocked Z9 mini beyond 750 by using Chrome console. I tried frequencies between 756 to 775, though its hash rate was a bit lower than 750 frequency.

$("#ant_freq").append('');
I wrote above commend to Chrome console in the advanced setting page.

Enabling voltage controld would be better.
TGJ
jr. member
Activity: 173
Merit: 5
June 27, 2018, 06:43:15 PM
Just ran 24 hours on Antpool PPLNS with one z9 mini oc to 750MHz.  I have mined 0.14004336 ZEC which is about $22.64 USD
16.42 avg Ksol.  9401 accepted and 50699 discarded.

I just received my 2nd z9 mini today and it is running on Flypool oc to 750Mhz.  I plan to compare them tomorrow.



I am interested in your results. I've been on flypool 22 hours now and have mined 1.36 ZEC. OCed to 650. Haven't had any invalid shares yet.
You mean 0.136 ZEC?
newbie
Activity: 14
Merit: 0
June 27, 2018, 05:23:39 PM
Just ran 24 hours on Antpool PPLNS with one z9 mini oc to 750MHz.  I have mined 0.14004336 ZEC which is about $22.64 USD
16.42 avg Ksol.  9401 accepted and 50699 discarded.

I just received my 2nd z9 mini today and it is running on Flypool oc to 750Mhz.  I plan to compare them tomorrow.



I am interested in your results. I've been on flypool 22 hours now and have mined 0.136 ZEC. OCed to 650. Haven't had any invalid shares yet.
newbie
Activity: 5
Merit: 0
June 27, 2018, 05:18:09 PM
I have not had time to test this properly, so im not sure it works. My temps where to high to go passed 750 Mhz.

But;
SSH to the miner -> cd /www/pages/cgi-bin -> vi minerAdvanced.cgi and add more field below 750 options. Like 775 and 800. Save file go to web panel and advanced config -> select 775 Mhz and hit save. Let me know if it works out.

What is the default login via SSH? root/root does not work, this works only for web administration...

root/admin

Yes, it works! Increased to 775Mhz. However, it seems to have lower hashrate (oscilating between 14-15) than with 750Mhz (15-17), but still no hw errors, I will try 800

EDIT: at 800Mhz, there was drop to 5kSol and the asic chips started to fail - did not initialize properly. 750 seems to be the most stable with the best performance at my side.
legendary
Activity: 3654
Merit: 8909
https://bpip.org
June 27, 2018, 04:17:54 PM
I have not had time to test this properly, so im not sure it works. My temps where to high to go passed 750 Mhz.

But;
SSH to the miner -> cd /www/pages/cgi-bin -> vi minerAdvanced.cgi and add more field below 750 options. Like 775 and 800. Save file go to web panel and advanced config -> select 775 Mhz and hit save. Let me know if it works out.

What is the default login via SSH? root/root does not work, this works only for web administration...

root/admin
Pages:
Jump to: