i just lost some of my coins helppppppp
you help - you brain
Topic: [M1] SupplyShock | Whitepaper Release | ShockTrader Imminent! | Updated Roadmap! - page 29. (Read 52313 times)
May 26, 2015, 07:23:33 PM
you help - you brain
May 26, 2015, 07:15:43 PM
Ya I would just make sure to exit your wallets that are POS staking because that should save the blockchain where it is and won't effect your staking ages I don't think and restart your computer and try that 
Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think
Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think ok ^ restart ok ^ and BOOM - all the same, at the arena
conclusion - "bug" )
May 26, 2015, 07:11:23 PM
Yep. Restart your computer.
The most annoying peeps with problems are those who call and demand support but did not (or even refuse to) try a reboot first.
The most annoying peeps with problems are those who call and demand support but did not (or even refuse to) try a reboot first.
You say bulshit ^ you are not competent in IT and more deep
May 26, 2015, 06:15:32 PM
i just lost some of my coins helppppppp
Howw?
Try backing up your wallet, deleting everything in your %appdata& and resync.
my comp switched off... im trying this now
Oh, you're good then...
May 26, 2015, 06:14:43 PM
i just lost some of my coins helppppppp
Howw?
Try backing up your wallet, deleting everything in your %appdata& and resync.
my comp switched off... im trying this now
May 26, 2015, 06:13:43 PM
i just lost some of my coins helppppppp
Howw?
Try backing up your wallet, deleting everything in your %appdata& and resync.
May 26, 2015, 06:07:31 PM
i just lost some of my coins helppppppp
How exactly did you lose some of your coins? Like what happened? May 26, 2015, 06:02:37 PM
i just lost some of my coins helppppppp
May 26, 2015, 05:53:36 PM
Ya I would just make sure to exit your wallets that are POS staking because that should save the blockchain where it is and won't effect your staking ages I don't think and restart your computer and try that Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think
Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think Make an awesome Supply Shock signature! Let's spread the word!!
I'll put it in my sig also!
May 26, 2015, 05:52:07 PM
wtf ?
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
Wierd, mine works perfectly fine..
Try to do some basic things first like restart wallet, restart computer or try to uninstall from control panel & reinstall?
I returned to the 1.1.2 and wait fix bug ) but thank you for the proposed solutions, I am confident that the problem is in the client...
Did you try those simple steps though? I only suggest that because no one else has that issue with the wallet...
I can not restart PC, I have many wallet's in POS ^ is the thing that one run wallet ok ^ but after open console and typed "Help" ^ I was sent to hell ^ the second, third, attempt open wallet, ended with error &
Try to rename your m1 folder in %appdata% (which means back it up) and start the client to generate a clean wallet. Does that work?
If so, delete the newly created, clean wallet and rename the folder back to its original name (make a backup first!) and delete everything but the wallet.dat in it. Start the wallet. Does that work?
ok , I have already tried to do so, but the result is the same... after open console and typed "Help" ^ I was sent to hell, the second, third, attempt open wallet, ended with error &
I think you should spend 2 min & try restarting the computer lol. It's one of the easiest & most basic things to try, just my 2c
i think problem in wallet ^ i'm try restart , but not now
Yep. Restart your computer.
The most annoying peeps with problems are those who call and demand support but did not (or even refuse to) try a reboot first.
The most annoying peeps with problems are those who call and demand support but did not (or even refuse to) try a reboot first.
May 26, 2015, 05:51:49 PM
Ya I would just make sure to exit your wallets that are POS staking because that should save the blockchain where it is and won't effect your staking ages I don't think and restart your computer and try that Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think
Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think Make an awesome Supply Shock signature! Let's spread the word!!
May 26, 2015, 05:49:11 PM
Yep. Restart your computer.
The most annoying peeps with problems are those who call and demand support but did not (or even refuse to) try a reboot first.
The most annoying peeps with problems are those who call and demand support but did not (or even refuse to) try a reboot first.
May 26, 2015, 05:45:09 PM
Ya I would just make sure to exit your wallets that are POS staking because that should save the blockchain where it is and won't effect your staking ages I don't think and restart your computer and try that Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think
Just make sure that you somehow save the chain that your POS wallets are on before restarting your computer because that should make sure that you won't have to start the staking age over again I think May 26, 2015, 05:42:18 PM
wtf ?
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
Wierd, mine works perfectly fine..
Try to do some basic things first like restart wallet, restart computer or try to uninstall from control panel & reinstall?
I returned to the 1.1.2 and wait fix bug ) but thank you for the proposed solutions, I am confident that the problem is in the client...
Did you try those simple steps though? I only suggest that because no one else has that issue with the wallet...
I can not restart PC, I have many wallet's in POS ^ is the thing that one run wallet ok ^ but after open console and typed "Help" ^ I was sent to hell ^ the second, third, attempt open wallet, ended with error &
Try to rename your m1 folder in %appdata% (which means back it up) and start the client to generate a clean wallet. Does that work?
If so, delete the newly created, clean wallet and rename the folder back to its original name (make a backup first!) and delete everything but the wallet.dat in it. Start the wallet. Does that work?
ok , I have already tried to do so, but the result is the same... after open console and typed "Help" ^ I was sent to hell, the second, third, attempt open wallet, ended with error &
I think you should spend 2 min & try restarting the computer lol. It's one of the easiest & most basic things to try, just my 2c
May 26, 2015, 05:38:57 PM
wtf ?
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
Wierd, mine works perfectly fine..
Try to do some basic things first like restart wallet, restart computer or try to uninstall from control panel & reinstall?
I returned to the 1.1.2 and wait fix bug ) but thank you for the proposed solutions, I am confident that the problem is in the client...
Did you try those simple steps though? I only suggest that because no one else has that issue with the wallet...
I can not restart PC, I have many wallet's in POS ^ is the thing that one run wallet ok ^ but after open console and typed "Help" ^ I was sent to hell ^ the second, third, attempt open wallet, ended with error &
Try to rename your m1 folder in %appdata% (which means back it up) and start the client to generate a clean wallet. Does that work?
If so, delete the newly created, clean wallet and rename the folder back to its original name (make a backup first!) and delete everything but the wallet.dat in it. Start the wallet. Does that work?
ok , I have already tried to do so, but the result is the same... after open console and typed "Help" ^ I was sent to hell, the second, third, attempt open wallet, ended with error &
im back on 1.1.2 and wait DEV
May 26, 2015, 05:12:41 PM
wtf ?
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
Wierd, mine works perfectly fine..
Try to do some basic things first like restart wallet, restart computer or try to uninstall from control panel & reinstall?
I returned to the 1.1.2 and wait fix bug ) but thank you for the proposed solutions, I am confident that the problem is in the client...
Did you try those simple steps though? I only suggest that because no one else has that issue with the wallet...
I can not restart PC, I have many wallet's in POS ^ is the thing that one run wallet ok ^ but after open console and typed "Help" ^ I was sent to hell ^ the second, third, attempt open wallet, ended with error &
Try to rename your m1 folder in %appdata% (which means back it up) and start the client to generate a clean wallet. Does that work?
If so, delete the newly created, clean wallet and rename the folder back to its original name (make a backup first!) and delete everything but the wallet.dat in it. Start the wallet. Does that work?
May 26, 2015, 04:23:29 PM
wtf ?
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
Wierd, mine works perfectly fine..
Try to do some basic things first like restart wallet, restart computer or try to uninstall from control panel & reinstall?
I returned to the 1.1.2 and wait fix bug ) but thank you for the proposed solutions, I am confident that the problem is in the client...
Did you try those simple steps though? I only suggest that because no one else has that issue with the wallet...
I can not restart PC, I have many wallet's in POS ^ is the thing that one run wallet ok ^ but after open console and typed "Help" ^ I was sent to hell ^ the second, third, attempt open wallet, ended with error &
May 26, 2015, 04:09:16 PM
wtf ?
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
i find bug ^ after installation run wallet all ok ^ but when I opened console and type "help" I was sent to hell ^ the next attempt to start wallet , I was sent to hell )))
Plzz fix
Thx
Wierd, mine works perfectly fine..
Try to do some basic things first like restart wallet, restart computer or try to uninstall from control panel & reinstall?
I returned to the 1.1.2 and wait fix bug ) but thank you for the proposed solutions, I am confident that the problem is in the client...
Did you try those simple steps though? I only suggest that because no one else has that issue with the wallet...
May 26, 2015, 04:03:12 PM
"shouldn't" should be "should". :p
May 26, 2015, 03:58:52 PM
Nice So I know this might sound kind of stupid but as long as I save my wallet.dat then download the new wallet and sync it with my old wallet.dat then everything will be okay right?
So I know this might sound kind of stupid but as long as I save my wallet.dat then download the new wallet and sync it with my old wallet.dat then everything will be okay right?You don't have to do any of that, just download & run
Yes. You shouldn't make a backup though - always make backups!
But thanks for a friendly reminder to me and anyone else who sometimes may forget to do something like that 
Cheers Jump to: