MaryJanecoin LLC The Bitcoin of the Cannabis Industry and Community - page 51.

0bert

sr. member

Activity: 266

Merit: 250

Quote from: device on May 31, 2015, 10:07:43 AM

Quote from: 0bert on May 31, 2015, 09:56:26 AM

Quote from: ?? on ??

Quote from: 0bert on May 31, 2015, 09:26:34 AM

How much time the -rescan usually needs? 25min. almost over... ^^

It depends how old your wallet.dat is and KB weight, from 10-60mins

Thanks! One hour is almost over... some more patience i guess...

So long it never took for me. on friends old laptop BTC wallet took 1 hour+ to open. sometimes

if your using old comp. wait. if its newer. restart

Yes, i am confused about the time, so long and it won't open... like bitcoin. ^^

So, i just killed the process, restarted the wallet (again with new created shortcut and -rescan in target, just to be safe) and it seems to be the same, it won't open.

Started now without rescan, opened in a few minutes(fine) and i see some more coins then last time, but it's still a tiny amount.
So i will do a new -rescan ... weird. ^^

Thx again!

E: If the -rescan works correct my wallet should open normal like without -rescan, am i right? ^^
(it's still "closed" , just tray and big desktop icon visible, still with -rescan, 10-15min. now)

device

full member

Activity: 181

Merit: 100

Quote from: chilly2k on May 31, 2015, 09:47:42 AM

Has anyone actually staked now that the blockchain is back? I've be connected for about 12 Hr's but so far no stakes.

Close it. wait ? of hours. and open it again. how much time does the wallet estimate to stake

I did so on 418722 block (wallet estimated couple of minutes).... waited and waited. nothing. opened other day and it staked 418723 block within 1 hour

device

full member

Activity: 181

Merit: 100

Quote from: 0bert on May 31, 2015, 09:56:26 AM

Quote from: ?? on ??

Quote from: 0bert on May 31, 2015, 09:26:34 AM

How much time the -rescan usually needs? 25min. almost over... ^^

It depends how old your wallet.dat is and KB weight, from 10-60mins

Thanks! One hour is almost over... some more patience i guess...

So long it never took for me. on friends old laptop BTC wallet took 1 hour+ to open. sometimes

if your using old comp. wait. if its newer. restart

0bert

sr. member

Activity: 266

Merit: 250

Quote from: ?? on ??

Quote from: 0bert on May 31, 2015, 09:26:34 AM

How much time the -rescan usually needs? 25min. almost over... ^^

It depends how old your wallet.dat is and KB weight, from 10-60mins

Thanks! One hour is almost over... some more patience i guess...

?!bennscammed!?

full member

Activity: 195

Merit: 100

Quote from: chilly2k on May 31, 2015, 09:47:42 AM

Has anyone actually staked now that the blockchain is back? I've be connected for about 12 Hr's but so far no stakes.

23 stakes and 2 orphans in the last 50minutes
im at block 419789

?!bennscammed!?

full member

Activity: 195

Merit: 100

Quote from: ?? on ??

Quote from: ?!bennscammed!? on May 31, 2015, 09:40:22 AM

Quote from: ?? on ??

Quote from: ?!bennscammed!? on May 31, 2015, 09:33:36 AM

Quote from: ?? on ??

For all those who have asked, there will be no coin swap. No coins being added. 15.3 million coins is final.

but wouldnt it be better to have a new coin with the same amount and swap it 1:1 just because of the unsold burned coins still apearing in the total coincount?
also to prevent fud in the future when MJ might be much more valuable?

It doesn't appear on the blockchain, where does it show that? The reality of the matter is that there are only 15.3 million. If anything says otherwise its incorrect.

just put "getinfo" in the console of the wallet.

I'll have to see what I can do about that, but for the record there truly are only 15.3 million coins in circulation, once our block explorer is working maybe that will be cleared up. I'll fix it if the explorer doesn't though.

Hey i know that...but fudders wont believe.
i bought at ico, i just witnessed the the burn of unsold coins and ccexs amateurish behaviour....

chilly2k

legendary

Activity: 1007

Merit: 1000

Has anyone actually staked now that the blockchain is back? I've be connected for about 12 Hr's but so far no stakes.

?!bennscammed!?

full member

Activity: 195

Merit: 100

Quote from: ?? on ??

Quote from: ?!bennscammed!? on May 31, 2015, 09:33:36 AM

Quote from: ?? on ??

For all those who have asked, there will be no coin swap. No coins being added. 15.3 million coins is final.

but wouldnt it be better to have a new coin with the same amount and swap it 1:1 just because of the unsold burned coins still apearing in the total coincount?
also to prevent fud in the future when MJ might be much more valuable?

It doesn't appear on the blockchain, where does it show that? The reality of the matter is that there are only 15.3 million. If anything says otherwise its incorrect.

just put "getinfo" in the console of the wallet.

version" : "v1.2.0.0: Experimental",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : xxx
"newmint" : 0.00000000,
"stake" : 5571.67930459,
"blocks" : 419731,
"timeoffset" : -3,
"moneysupply" : 51849182.97821891,
"connections" : 8,
"proxy" : "",
"ip" : "x",
"difficulty" : {
"proof-of-work" : 22.61957312,
"proof-of-stake" : 0.03559758
},
"testnet" : false,
"keypoololdest" : 1412965505,
"keypoolsize" : 101,
"paytxfee" : 0.01000000,
"mininput" : 0.00000000,
"errors" : ""
}

0bert

sr. member

Activity: 266

Merit: 250

Quote from: 0bert on May 31, 2015, 09:26:34 AM

How much time the -rescan usually needs? 25min. almost over... ^^

Sry, but any idea?

It's still not open... (just in the tray, and maryj symbol on desktop, usual like before the start) but something is happening, hope it's the rescan. Wink

?!bennscammed!?

full member

Activity: 195

Merit: 100

Quote from: ?? on ??

For all those who have asked, there will be no coin swap. No coins being added. 15.3 million coins is final.

but wouldnt it be better to have a new coin with the same amount and swap it 1:1 just because of the unsold burned coins still apearing in the total coincount?
also to prevent fud in the future when MJ might be much more valuable?

device

full member

Activity: 181

Merit: 100

Quote from: ?? on ??

For all those who have asked, there will be no coin swap. No coins being added. 15.3 million coins is final.

What about X11 wallet, and 420.000 being up for grabs?
https://twitter.com/MaryJaneCoinDev/status/594924535599616000

0bert

sr. member

Activity: 266

Merit: 250

How much time the -rescan usually needs? 25min. almost over... ^^

?!bennscammed!?

full member

Activity: 195

Merit: 100

Had the same problem like Obert.
Now all is fine. Coins are back, had 0 after downloading the FinalFix, and staking.
Thank you guys Grin

0bert

sr. member

Activity: 266

Merit: 250

Quote from: device on May 31, 2015, 08:55:33 AM

Quote from: 0bert on May 31, 2015, 08:49:12 AM

I think we should wait for Jahvinci or someone...

I am a lil bit mad now... i can't see 75% of my coins, but i guess it should be fixed soon. ;(
Maybe i did something wrong, but i don't see what...

1) Deleted my old maryj roaming on my hdd, but saved wallet.dat before! Wink

2) Copied new "MaryJaneCoin" folder from "Final Fix" into roaming folder on my hdd.
3) pasted old wallet.dat into new roaming folder.
4) started new maryj-wallet with "maryjanecoin-qt" from the "final fix/maryjanecoin-qt" folder.

What is wrong?

Thx for you help ladies & gentleman!

Assuming you mean WINDOWS 7 you:
1) Create a shortcut for maryjanecoin-qt on your desktop.
2) Right-click the shortcut and select properties.
3) In the field labeled Target type -rescan on the end.

Ah, now... i need to put -rescan behind the "

Like this:
"C:\Final Fix\maryjanecoin-qt\maryjanecoin-qt.exe" -rescan

Started, wallet seems to rescan, because it's still "closed" ... just the icon in the tray.
Will reply soon... Wink

device

full member

Activity: 181

Merit: 100

Quote from: 0bert on May 31, 2015, 08:49:12 AM

I think we should wait for Jahvinci or someone...

I am a lil bit mad now... i can't see 75% of my coins, but i guess it should be fixed soon. ;(
Maybe i did something wrong, but i don't see what...

1) Deleted my old maryj roaming on my hdd, but saved wallet.dat before! Wink

2) Copied new "MaryJaneCoin" folder from "Final Fix" into roaming folder on my hdd.
3) pasted old wallet.dat into new roaming folder.
4) started new maryj-wallet with "maryjanecoin-qt" from the "final fix/maryjanecoin-qt" folder.

What is wrong?

Thx for you help ladies & gentleman!

Assuming you mean WINDOWS 7 you:
1) Create a shortcut for maryjanecoin-qt on your desktop.
2) Right-click the shortcut and select properties.
3) In the field labeled Target type -rescan on the end.

0bert

sr. member

Activity: 266

Merit: 250

Quote from: PowerHemp on May 31, 2015, 08:35:55 AM

i dont know why.. can u send me your maryjanecoin.conf ? i still get no connection.. im at block 418822

We should have the same conf.

Quote

rpcuser=x
rpcpassword=y
server = 1
listen = 1
daemon = 1
port = 11080
addnode=194.135.90.5
addnode=194.135.90.81

I think we should wait for Jahvinci or someone...

I am a lil bit mad now... i can't see 75% of my coins, but i guess it should be fixed soon. ;(
Maybe i did something wrong, but i don't see what...

1) Deleted my old maryj roaming on my hdd, but saved wallet.dat before! Wink

2) Copied new "MaryJaneCoin" folder from "Final Fix" into roaming folder on my hdd.
3) pasted old wallet.dat into new roaming folder.
4) started new maryj-wallet with "maryjanecoin-qt" from the "final fix/maryjanecoin-qt" folder.

What is wrong?

Thx for you help ladies & gentleman!

PowerHemp

legendary

Activity: 1386

Merit: 1001

Ganja <3