Topic: Megaminer 6.3 - Multi pool / Multi Algo launcher - page 36. (Read 70970 times)

@tutulfo

There is an issue with miners that don't respond with hashrate within the first 200 sec (while benchmarking) or 600 sec (after initial benchmark)

On the next period the active miner is not showing at all, until profitability switch to a different miner.

Internally, during the benchmark on "next period", the hashrate is detected and recorded to file, but no active miner is displayed.

API PROBLEM is only and informative message about pool is not responding to MM request. No solution for this.

Yes, that is all you need.

I have removed all miners that are not the best on some algo, and set fastest miner I found for each algo.

If you have best configuration files, please request commit on github

You have 3 different problems:

* Your screen size seems too small, if you are in remote you must set config to greater size
* NO MINERS error, check you have miners file on miners folder, check also you have AMD or NVIDIA set on @type variable on config.txt
* Selected MiningMode is not valid for pool YIIMP. some time ago Yiimp had automatic mode enabled, example file has an error, replace Yiimp to Zpool for example

Excavator is problematic miner, stats files are only a file with benchmark number inside, you can share between computers.

MM is "only" a launcher, it is ccminer problem, try lower overclock setting.

replace to

 "skein"{$Divisor *= 100}

Thanks...I have projected something for this one, but now I have less time in my life for this project. It will not be soon

I think pools profit calc is far from exact, more than 5% error. Has sense try to add so exact calcs?

I am facing a seriously problem on 4.3. After running for about 4 hours or more, it stopped mining.



And


I have to close it and reopen the miner again.



This is normal:



I have to back to 4.2
I tried 4.2 but still facing Zpool API problem. Haven't met this before.

I wanted to mine on zpool only so I change Auto Start two pools to this
PoolsName Zpool
GOTO LOOP

and I wet into config and change BTC address to mine. Is this all I need to do? Ive been havings issues with nemosminer so im hoping this iwll work.

awesome, i'm going to look into it. i see that you also added a couple of more ccminer flavors in there like djm34 and nanashi, which is great.

still i think the owner of megaminer should look into this, otherwise we will end up with many different versions i'm afraid.
if it was up to me, all miners should be added to megaminer itself, and let the benchmarks do it's job to figure out the best for each individual mining rig.

I had noticed the same so I created the following

https://github.com/MikeBuzz/Megaminer

This has been setup with the best ccminers per Algo that I have tested with a 1070, you can just copy the miners files to your current version and they will work

i noticed that i had a lot better benchmarks on nemosminer for c11 with the alexis78 version.

unfortunately in megaminer by default there is just one version for c11 activated, so i have just added c11 into the /Miners/ccminerAlexis78.json myself.
the one i just added to the config, ccminerAlexis78, gives me 117.87 MH/s, while the old default one gave me just around 95 MH/s.
it's a performance gain of more than 20%, and it's currently the best algo to mine on zpool.

what i like from nemosminer is that it has multiple ccminers for the same algo, so that your benchmark will decide which version to actually use based on the best performance.
of course this will take more time benchmarking, but that's just a one time thing that needs to be done, and after that it will just produce more money for same equipment.

having multiple ccminers per algo is something that should also be added to megaminer by default i think. let the benchmarks decide which one is best rather than making the choice yourself i front.

----

checking some more,
HMQ1725, i ad 29.82 MH/s with the default ccminer-2.2
i have just added it to the ccminerTpruvot and i'm getting 30.61 MH/s
this is yet another example where nemosminer out of the box is quicker than megaminer because of having multiple ccminers per algo.

i think this should be implemented soon, to be able to be just as quick as nemosminer, at this moment megaminer is slower just because of this reason.

To be honest this script does not get any simpler.

Please share your BAT file. Also if you are selecting options manually, what are you selecting? ie "0, 99" or "5,2"

The first error is just a windows size error. no big deal.

I think the next 2 are due to an incorrect BAT file trying to mine a specific coin or algo with a pool which is not supported.

Hi Guys,
             Can anybody create a video and upload to youtube of How-to Setup MM , I am trying on AMD Rig for me its not working . I tried with MPH,ZPOOL, HR but its not working fine . benchmark loading for MPH start.bat work but after 1 mins windows get crashed.


None of the Auto example are working and giving shell error.
====================
AutoStart Example - one coin manual.bat

Exception setting "WindowSize": "Window cannot be taller than 55.
Parameter name: value.Height
Actual value was 60."
At C:\Users\Rebel-Rig1\Downloads\Megaminer-master\Include.ps1:515 char:5
+     $psWindow.WindowSize= $newSize
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], SetValueInvocationException
    + FullyQualifiedErrorId : ExceptionWhenSetting

NO MINERS!
===========================
AutoStart Example - Two pools on Auto - copia

Exception setting "WindowSize": "Window cannot be taller than 55.
Parameter name: value.Height
Actual value was 60."
At C:\Users\Rebel-Rig1\Downloads\Megaminer-master\Include.ps1:515 char:5
+     $psWindow.WindowSize= $newSize
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], SetValueInvocationException
    + FullyQualifiedErrorId : ExceptionWhenSetting

Selected MiningMode is not valid for pool SUPRNOVA

====================================
AutoStart Example - Two pools on Auto

Exception setting "WindowSize": "Window cannot be taller than 55.
Parameter name: value.Height
Actual value was 60."
At C:\Users\Rebel-Rig1\Downloads\Megaminer-master\Include.ps1:515 char:5
+     $psWindow.WindowSize= $newSize
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], SetValueInvocationException
    + FullyQualifiedErrorId : ExceptionWhenSetting

Selected MiningMode is not valid for pool YIIMP

Thank you ts
That's what Im looking for.

thank you