Mine new coin: VoteCoin - equihash, very low difficulty now - page 6.

punkoivan

jr. member

Activity: 143

Merit: 8

https://nibirupool.com

Yes, what's wrong ?

milicic

full member

Activity: 180

Merit: 100

Quote from: punkoivan on October 09, 2017, 08:23:40 AM

Quote from: Inertiauk on October 09, 2017, 07:45:48 AM

I'm a little late to the party but just pointed 1.5 KSOL to the pool,

How can I calculate coin yield per day / week . month from that based on current difficulty ?
I've taken away about 30% of my ETH mining efforts to point to this. So its a bit of a gamble!

Will there be efforts to list VoteCoin on major exchanges after the ICO finishes ?
What happens if the ICO doesn't reach target ?

http://pool.votecoin.site/workers/t1bgoc3UPcybANr3HbYDjbpY7ocEuQU9FPe

Thanks

1. You can calculate on whattomine.com, algorithm is equihash, you get can difficulty from http://explorer.votecoin.site/ last block.
2. Now devs are waiting for response from Poloniex.
3. If ICO doesn't reach target, you will receive some extra bonus.
from official site:

Quote

Coins unsold at the end date of ICO will be distributed between current contributors in proportion to their purchased value. So for example if only half of the coins is sold through ICO, all participating users will receive additional 100% bonus reward!

Did you say Poloniex? Cheesy

punkoivan

jr. member

Activity: 143

Merit: 8

https://nibirupool.com

Quote from: Inertiauk on October 09, 2017, 07:45:48 AM

I'm a little late to the party but just pointed 1.5 KSOL to the pool,

How can I calculate coin yield per day / week . month from that based on current difficulty ?
I've taken away about 30% of my ETH mining efforts to point to this. So its a bit of a gamble!

Will there be efforts to list VoteCoin on major exchanges after the ICO finishes ?
What happens if the ICO doesn't reach target ?

http://pool.votecoin.site/workers/t1bgoc3UPcybANr3HbYDjbpY7ocEuQU9FPe

Thanks

1. You can calculate on whattomine.com, algorithm is equihash, you get can difficulty from http://explorer.votecoin.site/ last block.
2. Now devs are waiting for response from Poloniex.
3. If ICO doesn't reach target, you will receive some extra bonus.
from official site:

Quote

Coins unsold at the end date of ICO will be distributed between current contributors in proportion to their purchased value. So for example if only half of the coins is sold through ICO, all participating users will receive additional 100% bonus reward!

Inertiauk

newbie

Activity: 5

Merit: 0

I'm a little late to the party but just pointed 1.5 KSOL to the pool,

How can I calculate coin yield per day / week . month from that based on current difficulty ?
I've taken away about 30% of my ETH mining efforts to point to this. So its a bit of a gamble!

Will there be efforts to list VoteCoin on major exchanges after the ICO finishes ?
What happens if the ICO doesn't reach target ?

http://pool.votecoin.site/workers/t1bgoc3UPcybANr3HbYDjbpY7ocEuQU9FPe

Thanks

lankyman

sr. member

Activity: 382

Merit: 250

Quote from: buzzkillb on October 09, 2017, 06:01:28 AM

Quote from: lankyman on October 09, 2017, 02:20:27 AM

Quote from: boo50 on October 08, 2017, 10:41:08 PM

create new .bat in the same folder
votecoin-cli.exe listaddressgroupings >addr1.txt
you'll get all addresses with balances in a file addr1.txt which already have transactions
or
votecoin-cli.exe getaddressesbyaccount "" >addr2.txt
just a list of addresses

BTW someone is solomining very hard, network in more than 1MSol

Hi boo,
The address iam using already is from my piped votecoin-cli.exe getnewaddress > myaddy.txt.
I have this in that txt and my miner.bat of course.

I will try your commands later on, but not really understanding what i do with that .txt output?
I mean how do i know i am the owner of the address i am using.

In the windows CLI wallet, "vot totals" command show your total. I spent a night transferring from my ubuntu wallet to windows, and it was odd how some of the coins disappeared for a while until I let it go for a while, hours. Any commands you are looking for search zcash wallet commands.

Oh goodness, this sounds like a headache.

I mean bitcoin core or bitsend or whatever wallet , is the container of your address so i dont understand how this works on command line, because that address i generate , how does your VOT totals understand that it is for the address you have generated. i just dont understand this.

Now i am worried i have been mining for hours for nothing.

buzzkillb

sr. member

Activity: 1021

Merit: 324

Quote from: lankyman on October 09, 2017, 02:20:27 AM

Quote from: boo50 on October 08, 2017, 10:41:08 PM

create new .bat in the same folder
votecoin-cli.exe listaddressgroupings >addr1.txt
you'll get all addresses with balances in a file addr1.txt which already have transactions
or
votecoin-cli.exe getaddressesbyaccount "" >addr2.txt
just a list of addresses

BTW someone is solomining very hard, network in more than 1MSol

Hi boo,
The address iam using already is from my piped votecoin-cli.exe getnewaddress > myaddy.txt.
I have this in that txt and my miner.bat of course.

I will try your commands later on, but not really understanding what i do with that .txt output?
I mean how do i know i am the owner of the address i am using.

In the windows CLI wallet, "vot totals" command show your total. I spent a night transferring from my ubuntu wallet to windows, and it was odd how some of the coins disappeared for a while until I let it go for a while, hours. Any commands you are looking for search zcash wallet commands.

lankyman

sr. member

Activity: 382

Merit: 250

Quote from: boo50 on October 08, 2017, 10:41:08 PM

create new .bat in the same folder
votecoin-cli.exe listaddressgroupings >addr1.txt
you'll get all addresses with balances in a file addr1.txt which already have transactions
or
votecoin-cli.exe getaddressesbyaccount "" >addr2.txt
just a list of addresses

BTW someone is solomining very hard, network in more than 1MSol

Hi boo,
The address iam using already is from my piped votecoin-cli.exe getnewaddress > myaddy.txt.
I have this in that txt and my miner.bat of course.

I will try your commands later on, but not really understanding what i do with that .txt output?
I mean how do i know i am the owner of the address i am using.

boo50

sr. member

Activity: 472

Merit: 250

lux8.net

create new .bat in the same folder
votecoin-cli.exe listaddressgroupings >addr1.txt
you'll get all addresses with balances in a file addr1.txt which already have transactions
or
votecoin-cli.exe getaddressesbyaccount "" >addr2.txt
just a list of addresses

BTW someone is solomining very hard, network in more than 1MSol

lankyman

sr. member

Activity: 382

Merit: 250

How do you own your address.
I mean i typed votecoin-cli getnewaddress

but how do u know u own this address and how do you get the balance from it.

I dont clearly see this in the help so i am unsure.

Thanks

Yerba

member

Activity: 146

Merit: 10

Upgrade miner to 12.6

ZECMiner64.exe -zpool stratum+tcp://pool.votecoin.site:4444 -zwal t1Ws**************SV1.Test -zpsw x

Exact command line, all my miners ( around 30 ) worked with this line.

Quote from: lankyman on October 08, 2017, 05:23:37 AM

I get errors when i try mine, what am i doing wrong?
I dont understand how i cant do this:

ZecMiner64.exe -zpool stratum+tcp://pool.votecoin.site:3333 -zwal t1Ws**************SV1 -zpsw x

║ Claymore's ZCash AMD GPU Miner v12.4 ║
╚════════════════════════════════════════════════════════════════╝

ZEC: 1 pool is specified
Main ZCash pool is pool.votecoin.site:3333

OpenCL initializing...
GPU #0 algorithm ASM, intensity 6

ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Connection lost, retry in 20 sec...

Please help me

umine

full member

Activity: 405

Merit: 136

Quote from: lankyman on October 08, 2017, 05:23:37 AM

I get errors when i try mine, what am i doing wrong?
I dont understand how i cant do this:

ZecMiner64.exe -zpool stratum+tcp://pool.votecoin.site:3333 -zwal t1Ws**************SV1 -zpsw x

║ Claymore's ZCash AMD GPU Miner v12.4 ║
╚════════════════════════════════════════════════════════════════╝

ZEC: 1 pool is specified
Main ZCash pool is pool.votecoin.site:3333

OpenCL initializing...
GPU #0 algorithm ASM, intensity 6

ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Connection lost, retry in 20 sec...

Please help me

Just remove "stratum+tcp://" from -zpool field and try to reconnect to the pool

MATHReX

sr. member

Activity: 861

Merit: 281

Quote from: lankyman on October 08, 2017, 05:23:37 AM

I get errors when i try mine, what am i doing wrong?
I dont understand how i cant do this:

ZecMiner64.exe -zpool stratum+tcp://pool.votecoin.site:3333 -zwal t1Ws**************SV1 -zpsw x

║ Claymore's ZCash AMD GPU Miner v12.4 ║
╚════════════════════════════════════════════════════════════════╝

ZEC: 1 pool is specified
Main ZCash pool is pool.votecoin.site:3333

OpenCL initializing...
GPU #0 algorithm ASM, intensity 6

ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Connection lost, retry in 20 sec...

Please help me

Obviously, you are facing authentication issues from the pool. Try removing "-zpsw x" and give a try.

lankyman

sr. member

Activity: 382

Merit: 250

I get errors when i try mine, what am i doing wrong?
I dont understand how i cant do this:

ZecMiner64.exe -zpool stratum+tcp://pool.votecoin.site:3333 -zwal t1Ws**************SV1 -zpsw x

║ Claymore's ZCash AMD GPU Miner v12.4 ║
╚════════════════════════════════════════════════════════════════╝

ZEC: 1 pool is specified
Main ZCash pool is pool.votecoin.site:3333

OpenCL initializing...
GPU #0 algorithm ASM, intensity 6

ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Stratum - connecting to 'pool.votecoin.site' <94.130.53.182> port 3333 (unsecure)
ZEC: Stratum - Connected (pool.votecoin.site:3333) (unsecure)
Pool sets new share target: 0x00400000 (diff: 1023H)
ZEC: Share rejected!
ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC: Connection lost, retry in 20 sec...

Please help me

boo50

sr. member

Activity: 472

Merit: 250

lux8.net

Quote from: nidko6 on October 08, 2017, 02:24:51 AM

Cant connect to the pool the miner just starts and instanly close

You can join telegramm group for support.
We'll help you to setup your miners.
Check link in my signature

boo50

sr. member

Activity: 472

Merit: 250

lux8.net

We will restart pool soon, to add high diff port.
At the moment nicehash won't work with our poll or official pool as well even on high diff port.
Nice ask for a higher diff.
It takes only a minute, don't worry.
Thanks for support our pool.

http://Votecoinmine.site
The First Votecoin pool.

nidko6

newbie

Activity: 4

Merit: 0

Cant connect to the pool the miner just starts and instanly close

jsenden

newbie

Activity: 12

Merit: 0

Quote from: igotek on October 07, 2017, 05:18:01 PM

your windows wallet is so strange.
Dont you have QT ?

Its easy

1. download the official commandline wallet (https://github.com/Tomas-M/VoteCoin/releases/download/v1.0.11-win32/VoteCoin.standalone.Win32.zip)
2. Extract files in to folder u desire
3. Run votecoind.exe (and keep it running in the background)
4. Open a new commandline, and go to the votecoin folder (cd C:\Users\....) like this for example (https://puu.sh/xSuwh/24ef1b1372.png)
5. Type vot addr & press enter (this will generate a new VOT addr for u) example : https://puu.sh/xSuyg/7874a94c2d.png
6. Now download Makalon's GUI client (https://drive.google.com/file/d/0BzoG9JwbaxccSW5KZzk5V0tCeTA/view?usp=sharing)
7. Extract it in the same folder u extracted the official wallet in
8. Open VoteCoinWallet.exe
9. Boom!

Good luck & Happy mining

igotek

hero member

Activity: 2086

Merit: 608

Online Security & Investment Corporation

your windows wallet is so strange.
Dont you have QT ?

jsenden

newbie

Activity: 12

Merit: 0

Quote from: testaaaa11 on October 07, 2017, 04:55:04 PM

Quote from: hellcatz on October 07, 2017, 03:12:27 PM

LuckPool.org has recently added VoteCoin to its list of equihash coins.
LuckPool features a "Miner's Jackpot" where the block finder gets a fixed amount of the block + their share percent.
The Miner's Jackpot is ~8% of the block reward or 10 VOTE coins.

Enjoy and Happy Hashing
http://luckpool.org/

PSA luckpool sucks and is easily manipulated. Unless your ping is very low, like under 10ms, stay away.

So a high ping makes u able to manipulate pools? Ahahah, can u please go back to minecraft please, u search for the wrong type of mining...
Been mining with Luckpool for 3 months now, only had 1 issue with 1 rig that kept disconnecting, and I was helped out by hellcatz and he fixed my issue...

testaaaa11

newbie

Activity: 30

Merit: 0

Quote from: hellcatz on October 07, 2017, 03:12:27 PM

LuckPool.org has recently added VoteCoin to its list of equihash coins.
LuckPool features a "Miner's Jackpot" where the block finder gets a fixed amount of the block + their share percent.
The Miner's Jackpot is ~8% of the block reward or 10 VOTE coins.

Enjoy and Happy Hashing
http://luckpool.org/

PSA luckpool sucks and is easily manipulated. Unless your ping is very low, like under 10ms, stay away.

Topic: Mine new coin: VoteCoin - equihash, very low difficulty now - page 6. (Read 34621 times)