Topic: MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each - page 33. (Read 94956 times)
June 16, 2014, 09:57:36 AM
Meh... It's kinda frustrating. I have some more stuff I would like to order, but I want to see the matter of the defective A2 resolved first.
The no response thing is really starting to bug me.
June 16, 2014, 07:21:38 AM
There is also Minera that supports the G-Blade with sandor111's CPUminer. It's a very nice interface too
https://github.com/michelem09/minera
https://github.com/michelem09/minera
June 16, 2014, 06:41:27 AM
Maybe you should try the CPU miner for Gridseed from sandor111, I always had the best results with that.
https://github.com/siklon/cpuminer-gc3355
You should get something like 5.6Mh/s with it. HW errors should be only a few.
It also shows the results from each chip, so you can easily track if there are chips doing nothing at all.
Thanks for the tip, I will try it for a few hours and see if i have better results
June 16, 2014, 06:19:58 AM
So, i just got my G-Blade from MinerEU and i think something is not right after running it for 12 hours 
I'm using the Hashra controller and the clockspeed of 839 (supposed it's the "magic" number) and my top speed is just 4.6Mh/s and the average is 4.4. Also i'm getting to many HW errors. I think 2242 HW errors is way to many for something that it's stock ant not overclocked
Is there any Pi controller i can use that can check the chips individually to see if they are working or the temperature? I'm think i have one or two bad chips on my blades. I was expecting at least 5.5 top and 5.2 average
I'm using the Hashra controller and the clockspeed of 839 (supposed it's the "magic" number) and my top speed is just 4.6Mh/s and the average is 4.4. Also i'm getting to many HW errors. I think 2242 HW errors is way to many for something that it's stock ant not overclocked
Is there any Pi controller i can use that can check the chips individually to see if they are working or the temperature? I'm think i have one or two bad chips on my blades. I was expecting at least 5.5 top and 5.2 average
Maybe you should try the CPU miner for Gridseed from sandor111, I always had the best results with that.
https://github.com/siklon/cpuminer-gc3355
You should get something like 5.6Mh/s with it. HW errors should be only a few.
It also shows the results from each chip, so you can easily track if there are chips doing nothing at all.
June 16, 2014, 06:07:14 AM
Well someone is doing work at MinerEU, they have updated their website again - adding power supplies to the shop and a new affiliate section. Of course no replies to email.
If they do as they say and start shipping them tomorrow, then they could at least tell us that the've received them and that this batch is good.
If they do as they say and start shipping them tomorrow, then they could at least tell us that the've received them and that this batch is good.
Yes, when there is stuff to be sold, work is being done. When it's sold, not so much...
June 16, 2014, 06:06:58 AM
So, i just got my G-Blade from MinerEU and i think something is not right after running it for 12 hours
I'm using the Hashra controller and the clockspeed of 839 (supposed it's the "magic" number) and my top speed is just 4.6Mh/s and the average is 4.4. Also i'm getting to many HW errors. I think 2242 HW errors is way to many for something that it's stock ant not overclocked
Is there any Pi controller i can use that can check the chips individually to see if they are working or the temperature? I'm think i have one or two bad chips on my blades. I was expecting at least 5.5 top and 5.2 average
I'm using the Hashra controller and the clockspeed of 839 (supposed it's the "magic" number) and my top speed is just 4.6Mh/s and the average is 4.4. Also i'm getting to many HW errors. I think 2242 HW errors is way to many for something that it's stock ant not overclocked
Is there any Pi controller i can use that can check the chips individually to see if they are working or the temperature? I'm think i have one or two bad chips on my blades. I was expecting at least 5.5 top and 5.2 average
June 16, 2014, 05:46:50 AM
Well someone is doing work at MinerEU, they have updated their website again - adding power supplies to the shop and a new affiliate section. Of course no replies to email.
If they do as they say and start shipping them tomorrow, then they could at least tell us that the've received them and that this batch is good.
If they do as they say and start shipping them tomorrow, then they could at least tell us that the've received them and that this batch is good.
June 16, 2014, 05:27:54 AM
Well tomorrow is Tuesday, so I'm expecting a shipping notification then for my next unit. Still no word on my promised compensation though.
I just sent them an email because I would like to know when the A2Mini will be shipped and whether I can expect some form of compensation.
Hopefully I will get an answer today. They may also add a couple of Blizzards as compensation, I would be happy with that.
I've been playing around with the Fury's last week and they are not as bad as I thought.
They use a lot of power ~42W. But to run a few of them is not really a problem.
June 16, 2014, 05:26:49 AM
Mje, I'm still waiting for my replacement. Have send another email, since the previous one was left unanswered. It's getting annoying (again).
June 16, 2014, 05:13:00 AM
Well tomorrow is Tuesday, so I'm expecting a shipping notification then for my next unit. Still no word on my promised compensation though.
June 16, 2014, 04:54:16 AM
My parcel has been delivered apparently and signed for by some dude called "DELIVERED SIGNED FOR BY MOTUNRAYO". And you know when this was supposed to have happened? 10 Jun 2014 11:22.
When was the parcel picked up from minereu? That's right, 10 Jun 2014 14:51, AFTER it was supposedly delivered.
DPD has some serious fucking shit going on there. Dump DPD, they're apparently too stupid to get a package from A to B, or operate a proper tracking system that doesn't allow statuses to happen before other statuses. This is one of the most grotesque experiences I've had with a carrier, EVER.
When was the parcel picked up from minereu? That's right, 10 Jun 2014 14:51, AFTER it was supposedly delivered.
DPD has some serious fucking shit going on there. Dump DPD, they're apparently too stupid to get a package from A to B, or operate a proper tracking system that doesn't allow statuses to happen before other statuses. This is one of the most grotesque experiences I've had with a carrier, EVER.
June 16, 2014, 03:00:02 AM
I don't mind DPD, I know my delivery driver well. You guys could improve your service by responding to emails
Problem is, my DPD guy could be the best in the world, if the package doesn't make it out of UK, he can't do anything either...
I seriously hope my case is the famous unfortunate, isolated event. Last tracking update June, 11th. Noone knows where the package is.
Waiting my parcel too. Ordered 19th may one A2mini. Parcel was missing and went back to minereu. Now they promised to send it this week.
Hope getting something soon. Been really patient.
June 16, 2014, 01:34:10 AM
It's not up to you to chase your package with DPD. MinerEU as the sender should be doing that
June 15, 2014, 05:18:45 PM
I don't mind DPD, I know my delivery driver well. You guys could improve your service by responding to emails
Problem is, my DPD guy could be the best in the world, if the package doesn't make it out of UK, he can't do anything either...
I seriously hope my case is the famous unfortunate, isolated event. Last tracking update June, 11th. Noone knows where the package is.
June 15, 2014, 04:21:07 PM
Flip the blades around so that the small heatsinks are in the middle where the fans deadspot is. Are they high pressure fans? If so put the blades right up against them
June 15, 2014, 03:38:52 PM
Almost done with my custom casing.
Just needs some finishing touches.
Overview:
The fans:
The A2's:
And some lights to find it in the dark
:
Seems to hold the same temperatures, and a slightly lower Hash speed (I think that is due to a different coin mined on the multipool, clevermining)
What do you guys think of the setup? Any improvements??
Just needs some finishing touches.
Overview:
The fans:
The A2's:
And some lights to find it in the dark
:
Seems to hold the same temperatures, and a slightly lower Hash speed (I think that is due to a different coin mined on the multipool, clevermining)
What do you guys think of the setup? Any improvements??
June 15, 2014, 03:24:53 PM
@MinerEU,
Do you already know when you're receiving the new Zeus miners Hurricane and Blizzard?
Are you going to be able to ship them by the 17th?
Do you already know when you're receiving the new Zeus miners Hurricane and Blizzard?
Are you going to be able to ship them by the 17th?
June 15, 2014, 02:50:17 PM
I don't mind DPD, I know my delivery driver well. You guys could improve your service by responding to emails
June 15, 2014, 02:33:57 PM
For those we are complaining about DPD shipping service, we have started to evaluate the possibility to use Fedex/UPS/DHL .
The problem is that they are a bit expensive, we want to use one provider to provide service for all our EU customers. If you have good suggestions for us , please shoot here.
The problem is that they are a bit expensive, we want to use one provider to provide service for all our EU customers. If you have good suggestions for us , please shoot here.
June 15, 2014, 11:17:13 AM
Hi, i want buy a GRIDSEED G-BLADE SCRYPT MINER (80 CHIP) 5.2 MH/s from MinerEu, (https://minereu.com/product/gridseed-blade-miner-80-chip-speical-promotion/), but MinerEU doesn't accept paypal, only BTC, instead c yes.
Did Anyone buy a ASIC's from MinerEu? Is MinerEu reliable? Had anyone a problem with it? Or It's better zoomhash?
Did Anyone buy a ASIC's from MinerEu? Is MinerEu reliable? Had anyone a problem with it? Or It's better zoomhash?
I've bought a pack of 10 Gridseed a few months back, made a bank transfer and as soon has they had it confirmed, I got the package in less than 3 days. Everything went fine and they're still working (even thought atm they're not much profit ehehe but I got free electricity so I'll keep them running until they stop).
More recently, June 12, I've ordered the "HurricaneX3 14-15Mh/s SCRYPT ASIC MINER", made also a bank transfer, and it's true they now have a ticket system - someone mentioned it a few pages back in this thread -
From the ticket system I first got an automated reply acknowledging receiving my e-mail on june 12 with the proof of bank transfer, and a few hours later, although they are in the UK, around midnight, I got another e-mail updating the ticket saying "Payment proof provided, we will secure your stock and ship to you when it clears on our bank. Thank you. ".
The "HurricaneX3 14-15Mh/s SCRYPT ASIC MINER" should only start shipping 17/19th, and considering I may have to wait 5 working days for the bank transfer, I'm hoping I'll get mine around 20th, but I'll stay in touch and give updates.
Btw anyone else ordered the Hurricane from them?
EDIT: MinerEU is a good choice for me because I'm in Europe, never tried zoomhash since they ship from the USA.
What do you think of BTC payment? Which guarantees bank transfer gives? Wich is the best payment method and why?
I'll pay in BTC next time. First time I used bank transfer because I didn't knew enough yet to take a chance on a BTC transfer.
And 3 days ago, my second purchase, I should have used BTC, it would have been faster, hate the fact that bank transfers take up to 5 working days. After everything sorted I was kicking myself in the head, it would have been sorted right away.
I have to admit the real reason
It's stupid really, I was tired from working but wanted to finish sorting the monthly payments, was doing the monthly budget and sorting how much I could squeeze out of this month's budget and put it towards mining, that I totally failed there. While paying other things, doing other transfers also ordered and paid this one without stopping to thing a second. Go go failed multitasking! Jump to: