Topic: MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each - page 30. (Read 94944 times)
June 17, 2014, 09:30:40 AM
I'm starting to think it would be less hassle to buy direct from China
June 17, 2014, 09:28:45 AM
I expect my email will be ignored
June 17, 2014, 09:25:57 AM
I have asked how to get a refund
Yes I'm thinking about getting a refund as well, I paid $4026.20 including shipping and the 2.5% exchange fee they charge.
I certainly want the whole amount back on my account when they are not shipping my A2Mini early next week.
They can send it with a SEPA transfer, should not be to difficult from within the EU.
June 17, 2014, 09:08:29 AM
I have asked how to get a refund
June 17, 2014, 08:53:38 AM
Do you have firmware image for the Zeus 13-15MH/s miner?
There is no real firmware, only a PI image with cgminer.
Where can i find that? Or can i copy image from the A2 MINI? (read: Scripta)
June 17, 2014, 08:53:24 AM
You can download it from Zeus or from Hashra.
There also seems to be something called starminer, but I never tried that one.
There also seems to be something called starminer, but I never tried that one.
June 17, 2014, 08:52:06 AM
Do you have firmware image for the Zeus 13-15MH/s miner?
There is no real firmware, only a PI image with cgminer.
June 17, 2014, 08:49:34 AM
Do you have firmware image for the Zeus 13-15MH/s miner?
June 17, 2014, 08:45:03 AM
The miner that was working for me at Waffle Pool seems to be dead.
I'm very unhappy about the whole situation.
I'm very unhappy about the whole situation.
June 17, 2014, 08:07:38 AM
Don't give a crap about the Pi image, I just want an updated cgminer 
June 17, 2014, 08:05:21 AM
Well Inno were very rude, I said "Hello" on Skype and they just said "Who are you?". I'm getting sick of all these rude people everywhere, does nobody have any manners or values anymore?
Might just be that over 1000 strange people bother them on Skype. Could be anything. At any rate, I'm sure that if they had an updated 'official' Pi image, I would hear about it
June 17, 2014, 08:00:04 AM
Today is the day that would send teams MInerEU. And still the silence. So difficult is to have informed customers like going all ...
I do not understand. truth.
I do not understand. truth.
June 17, 2014, 07:44:04 AM
The hash rate seems way to low. I've had a g-blade in the past and it was always hoovering between 5.2 and 5.6 Mh/s.
This was with cpu-miner from sandor111, auto tuning enabled, default clock 850 MHz.
I don't remember the number of hardware errors exactly, but it was low, somewhere in the region of 1.5% or less.
This was with cpu-miner from sandor111, auto tuning enabled, default clock 850 MHz.
I don't remember the number of hardware errors exactly, but it was low, somewhere in the region of 1.5% or less.
Acording to this link http://cryptomining-blog.com/tag/cpuminer-sandor111/ minera uses the sandor111 cpu-miner. I'm going to try the 850 MHz for a few hours and see how it's goes.
Quote
Strange thing is that both of your blades are under performing. Maybe the problem is not in the g-blade but somewhere else.
That already crossed my mind. I have one friend that got one G-Blade and he already agreed to let me test mine on is setup and using his on my setup. Also i will try the autotune and i think i can output the log file to see if anything pops up
Thank you JoostB and James42 for your help
June 17, 2014, 07:41:58 AM
Looks dodgy to me. See if MinerEU will respond to you.
Yes it does look dodgy
I think one or two chips are not working. I could try to lower the temperature but i'm almost sure it's not going to solve anything. Also the track record for MinerEU to respond to emails is very bad right now. But i need to solve this 
Quote
What do you think of Minera?
It looks very good to be honest. Many thanks for the tip
Btw, is there a way to check if all the 40 chips on each blade are working? When you run cpu-miner in a console window, it shows the shares, and from which blade and chip number they came.
Watching this you can easily check if there is a chip not working.
Maybe you can send the output from cpu-miner to a log file when running under minera, I don't know if this works.
June 17, 2014, 07:36:04 AM
Actually that reminds me search on here for the autotuning feature in Minera. That might help you nail down the problem.
June 17, 2014, 07:31:19 AM
The hash rate seems way to low. I've had a g-blade in the past and it was always hoovering between 5.2 and 5.6 Mh/s.
This was with cpu-miner from sandor111, auto tuning enabled, default clock 850 MHz.
I don't remember the number of hardware errors exactly, but it was low, somewhere in the region of 1.5% or less.
Strange thing is that both of your blades are under performing. Maybe the problem is not in the g-blade but somewhere else.
This was with cpu-miner from sandor111, auto tuning enabled, default clock 850 MHz.
I don't remember the number of hardware errors exactly, but it was low, somewhere in the region of 1.5% or less.
Strange thing is that both of your blades are under performing. Maybe the problem is not in the g-blade but somewhere else.
June 17, 2014, 07:28:00 AM
That I don't know I'm afraid
June 17, 2014, 07:25:23 AM
Looks dodgy to me. See if MinerEU will respond to you.
Yes it does look dodgy
I think one or two chips are not working. I could try to lower the temperature but i'm almost sure it's not going to solve anything. Also the track record for MinerEU to respond to emails is very bad right now. But i need to solve this Quote
What do you think of Minera?
It looks very good to be honest. Many thanks for the tip
Btw, is there a way to check if all the 40 chips on each blade are working? Jump to: