Topic: Mining OS - page 4. (Read 18403 times)
I also had a problem with passing statistics like in twan69666 (Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because of the target machine actively refused it 127.0.0.1:3333 at System .Net.Sockets.Socket.DoConnect (EndPoint endPointSnapshot, SocketAddress socketAddress)). The firewall is disabled. OS - Windows 7. On another computer on the network, this problem does not arise.
I know you mentioned adding new features (and hopefully not abandoning), but can anyone else get the profitability tab/window to work? It just spins for me, like it's trying to connect.
Also, like a few have mentioned, any chance of adding decred?
Also, like a few have mentioned, any chance of adding decred?
Can you add support nicehash DCR and ZEC?
-zpool stratum+ssl://Equihash.eu.nicehash.com:33357
-dpool stratum+tcp://decred.eu.nicehash.com:3354
thank you.
Please dont leave that project. I try many other but you make good interface and very simple configure.
-zpool stratum+ssl://Equihash.eu.nicehash.com:33357
-dpool stratum+tcp://decred.eu.nicehash.com:3354
thank you.
Please dont leave that project. I try many other but you make good interface and very simple configure.
any news coming?
can you add pool for decred for dual claymore miner
http://zpool.ca
stratum+tcp://decred.mine.zpool.ca:5744
http://zpool.ca
stratum+tcp://decred.mine.zpool.ca:5744
I was just trying to setup my rig but there's adds wright in the menu how do I get rid or move these out of the way thanks
Add support for MusiCoin, here the pool: http://musicoin.nomnom.technology and here official post: https://bitcointalksearch.org/topic/annmusic-musicoin-blockchain-upgrades-to-v30quantitative-tightening-1776113
I don't have any idea why not see your miner applicaiton
I think I have it. Can I just confirm, is all traffic sent out via port 3333?
Please try to run MinerClient.exe with -d (it make a log for Exceptions) I don't know why can't connect to miner, I am using W10 now, and no problem.
I'm getting some interesting results. I'mtrying on 2 different computers on the same network, both have the same log file, however, 1 computer is sending traffic and the other isnt.
Quote
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:3333
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request)
at System.Net.WebClient.DownloadString(Uri address)
at System.Net.WebClient.DownloadString(String address)
at MultiClient.M_Claymore.getStat()
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request)
at System.Net.WebClient.DownloadString(Uri address)
at System.Net.WebClient.DownloadString(String address)
at MultiClient.M_Claymore.getStat()
Looks like it's getting hungup at 127.0.0.1, but isn't that localhost? When I saw that I figured firewall issue, but it's working on 1 machine on the same network and not the other. Even after disabling firewall and all
Hmm it is very intresting. Can you see statistics in: http://127.0.0.1:3333 ? Or not?
I can. All stats look perfect
Please try to run MinerClient.exe with -d (it make a log for Exceptions) I don't know why can't connect to miner, I am using W10 now, and no problem.
I'm getting some interesting results. I'mtrying on 2 different computers on the same network, both have the same log file, however, 1 computer is sending traffic and the other isnt.
Quote
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:3333
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request)
at System.Net.WebClient.DownloadString(Uri address)
at System.Net.WebClient.DownloadString(String address)
at MultiClient.M_Claymore.getStat()
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request)
at System.Net.WebClient.DownloadString(Uri address)
at System.Net.WebClient.DownloadString(String address)
at MultiClient.M_Claymore.getStat()
Looks like it's getting hungup at 127.0.0.1, but isn't that localhost? When I saw that I figured firewall issue, but it's working on 1 machine on the same network and not the other. Even after disabling firewall and all
The client need to run with administrator privileges, turn off firewall and antivirus, what miner app do you run now?
It is being run with admin privileges. As you can see, it's been running fine for 15 hours. This just started happening the other day
http://www.imagebam.com/image/80d162539998387
Any idea with my issue? It can retrieve the needed info from the server and set configs, but for some reason it can't see the miner that it started? I've tried with Claymore's Dual Mining and Zcash miners. Both are the same
Was working fine in Windows 7. Now in Windows 10 64 bit, I've tried with both firewall and malware off. Is there a debug feature or log file that can be run?
Else one problem I have today.
When start RIG without internet then MinerMonitorClient not connect to Server and not start miner.
But when after 5 min Internet switch on - MinerMonitorClient not reconnect to server and my RIG not mining until restart.
Its not bug 100%. it only one time I have this situation.
MinerMonitorClient must check connection to server and if connection UP starting miner.
I very like your software and want help make better.
When start RIG without internet then MinerMonitorClient not connect to Server and not start miner.
But when after 5 min Internet switch on - MinerMonitorClient not reconnect to server and my RIG not mining until restart.
Its not bug 100%. it only one time I have this situation.
MinerMonitorClient must check connection to server and if connection UP starting miner.
I very like your software and want help make better.
today morning I received email about stop my all RIG, but rig working good.
2 hours agop I turn off my one RIG. 30-40min RIG was off, but I not received notify on Email.
Can ypu make notify when hashrate is down 5%?
2 hours agop I turn off my one RIG. 30-40min RIG was off, but I not received notify on Email.
Can ypu make notify when hashrate is down 5%?
Server off
Hello, I tried to use your software but when I launch it, it says "Can't connect to miner application", I can't find the same error anywhere on the thread could you help me?
I've began to have this problem as well. Just started with the new server/SQL move? I'm only running CM Dual miner.
I can also confirm the email is not working once a rig goes offline
Just moved to Windows 10 and I'm also receiving an error when trying to create the startup task
"Unhandled Exception: System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
at Microsoft.Win32.TaskScheduler.V2Interop.ITaskFolder.RegisterTaskDefinition(String Path, ITaskDefinition pDefinition, Int32 flags, Object UserId, Object password, TaskLogonType LogonType, Object sddl)
at Microsoft.Win32.TaskScheduler.TaskFolder.RegisterTaskDefinition(String path, TaskDefinition definition, TaskCreation createType, String userId, String password, TaskLogonType logonType, String sddl)
at Microsoft.Win32.TaskScheduler.TaskFolder.RegisterTaskDefinition(String path, TaskDefinition definition)
at MultiClient.Program.createTask()
at MultiClient.Program.Main(String[] args)"
EDIT: Figured it out. I upgraded from Windows 7 to Windows 10. The upgrade did not delete my previous scheduled task. I had to get rid of it in task scheduler, and I was then able to re-create it without issue
Are you run with administrator privileges?
I am. The startup task was a windows issue. Thats fixed. The "can't connect to miner application" seems to be a different issue?
The client need to run with administrator privileges, turn off firewall and antivirus, what miner app do you run now?
It is being run with admin privileges. As you can see, it's been running fine for 15 hours. This just started happening the other day
http://www.imagebam.com/image/80d162539998387
Hello, I tried to use your software but when I launch it, it says "Can't connect to miner application", I can't find the same error anywhere on the thread could you help me?
I've began to have this problem as well. Just started with the new server/SQL move? I'm only running CM Dual miner.
I can also confirm the email is not working once a rig goes offline
Just moved to Windows 10 and I'm also receiving an error when trying to create the startup task
"Unhandled Exception: System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
at Microsoft.Win32.TaskScheduler.V2Interop.ITaskFolder.RegisterTaskDefinition(String Path, ITaskDefinition pDefinition, Int32 flags, Object UserId, Object password, TaskLogonType LogonType, Object sddl)
at Microsoft.Win32.TaskScheduler.TaskFolder.RegisterTaskDefinition(String path, TaskDefinition definition, TaskCreation createType, String userId, String password, TaskLogonType logonType, String sddl)
at Microsoft.Win32.TaskScheduler.TaskFolder.RegisterTaskDefinition(String path, TaskDefinition definition)
at MultiClient.Program.createTask()
at MultiClient.Program.Main(String[] args)"
EDIT: Figured it out. I upgraded from Windows 7 to Windows 10. The upgrade did not delete my previous scheduled task. I had to get rid of it in task scheduler, and I was then able to re-create it without issue
Are you run with administrator privileges?
I am. The startup task was a windows issue. Thats fixed. The "can't connect to miner application" seems to be a different issue?
Hello, I tried to use your software but when I launch it, it says "Can't connect to miner application", I can't find the same error anywhere on the thread could you help me?
I've began to have this problem as well. Just started with the new server/SQL move? I'm only running CM Dual miner.
I can also confirm the email is not working once a rig goes offline
Just moved to Windows 10 and I'm also receiving an error when trying to create the startup task
"Unhandled Exception: System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
at Microsoft.Win32.TaskScheduler.V2Interop.ITaskFolder.RegisterTaskDefinition(String Path, ITaskDefinition pDefinition, Int32 flags, Object UserId, Object password, TaskLogonType LogonType, Object sddl)
at Microsoft.Win32.TaskScheduler.TaskFolder.RegisterTaskDefinition(String path, TaskDefinition definition, TaskCreation createType, String userId, String password, TaskLogonType logonType, String sddl)
at Microsoft.Win32.TaskScheduler.TaskFolder.RegisterTaskDefinition(String path, TaskDefinition definition)
at MultiClient.Program.createTask()
at MultiClient.Program.Main(String[] args)"
EDIT: Figured it out. I upgraded from Windows 7 to Windows 10. The upgrade did not delete my previous scheduled task. I had to get rid of it in task scheduler, and I was then able to re-create it without issue
Oh!! aweosome, now site is very faster!
I have a question... E-Mail notification is working? I don't see this option in my account, but I can see that options en others users account
I have a question... E-Mail notification is working? I don't see this option in my account, but I can see that options en others users account
Yes. Speed up!!! Good work.
Email notify not working.
Email notify not working.
Hello, I tried to use your software but when I launch it, it says "Can't connect to miner application", I can't find the same error anywhere on the thread could you help me?
Jump to: