i keep the power limit at 75 untouch
i did -i 21 before, rig stop after few hour
Topic: [ mining os ] nvoc - page 138. (Read 418546 times)
try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4 
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend
Good to know other coins too, i only know BSD so far
you mind sharing your OC settings while mining xevan, i also use 1060 too so
Thanks in advance.
my rig core=150 memory=100 in 1bash, ccminer add -i 19
is working on my rig
, but im not sure is the best settingWhat is the power limit?? I using 64 PL currently, getting around 15.42 MH with my 8x1060
I've pushed my 1060 to -i 21 still working fine, i need to lower my memory as well (currently on +500).
Thanks for sharing your OC info
It is not possible to compile TPccminer by running ./build.sh with nvOC.
It has probably something to do with the openssl version ~ anyone has a fix for it?
It has probably something to do with the openssl version ~ anyone has a fix for it?
Code:
m1@19_1_4:~/TPccminer$ ./build.sh
Making distclean in compat
make[1]: Entering directory '/home/m1/TPccminer/compat'
Making distclean in jansson
make[2]: Entering directory '/home/m1/TPccminer/compat/jansson'
test -z "libjansson.a" || rm -f libjansson.a
rm -f *.o
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm -f Makefile
make[2]: Leaving directory '/home/m1/TPccminer/compat/jansson'
make[2]: Entering directory '/home/m1/TPccminer/compat'
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory '/home/m1/TPccminer/compat'
rm -f Makefile
make[1]: Leaving directory '/home/m1/TPccminer/compat'
make[1]: Entering directory '/home/m1/TPccminer'
test -z "ccminer" || rm -f ccminer
rm -f *.o
rm -f Algo256/*.o
rm -f JHA/*.o
rm -f compat/*.o
rm -f crypto/*.o
rm -f crypto/cpu/*.o
rm -f equi/*.o
rm -f equi/blake2/*.o
rm -f heavy/*.o
rm -f lbry/*.o
rm -f lyra2/*.o
rm -f neoscrypt/*.o
rm -f quark/*.o
rm -f qubit/*.o
rm -f scrypt/*.o
rm -f sha256/*.o
rm -f sia/*.o
rm -f skunk/*.o
rm -f sph/*.o
rm -f x11/*.o
rm -f x13/*.o
rm -f x15/*.o
rm -f x17/*.o
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f Algo256/.deps/.dirstamp
rm -f Algo256/.dirstamp
rm -f JHA/.deps/.dirstamp
rm -f JHA/.dirstamp
rm -f compat/.deps/.dirstamp
rm -f compat/.dirstamp
rm -f crypto/.deps/.dirstamp
rm -f crypto/.dirstamp
rm -f crypto/cpu/.deps/.dirstamp
rm -f crypto/cpu/.dirstamp
rm -f equi/.deps/.dirstamp
rm -f equi/.dirstamp
rm -f equi/blake2/.deps/.dirstamp
rm -f equi/blake2/.dirstamp
rm -f heavy/.deps/.dirstamp
rm -f heavy/.dirstamp
rm -f lbry/.deps/.dirstamp
rm -f lbry/.dirstamp
rm -f lyra2/.deps/.dirstamp
rm -f lyra2/.dirstamp
rm -f neoscrypt/.deps/.dirstamp
rm -f neoscrypt/.dirstamp
rm -f quark/.deps/.dirstamp
rm -f quark/.dirstamp
rm -f qubit/.deps/.dirstamp
rm -f qubit/.dirstamp
rm -f scrypt/.deps/.dirstamp
rm -f scrypt/.dirstamp
rm -f sha256/.deps/.dirstamp
rm -f sha256/.dirstamp
rm -f sia/.deps/.dirstamp
rm -f sia/.dirstamp
rm -f skunk/.deps/.dirstamp
rm -f skunk/.dirstamp
rm -f sph/.deps/.dirstamp
rm -f sph/.dirstamp
rm -f x11/.deps/.dirstamp
rm -f x11/.dirstamp
rm -f x13/.deps/.dirstamp
rm -f x13/.dirstamp
rm -f x15/.deps/.dirstamp
rm -f x15/.dirstamp
rm -f x17/.deps/.dirstamp
rm -f x17/.dirstamp
rm -f ccminer-config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/m1/TPccminer'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./.deps compat/.deps crypto/.deps crypto/cpu/.deps equi/.deps equi/blake2/.deps lyra2/.deps neoscrypt/.deps sia/.deps sph/.deps
rm -f Makefile
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for gcc option to accept ISO C99... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking dependency style of gcc... gcc3
checking for ranlib... ranlib
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for gcc option to support OpenMP... -fopenmp
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking sys/endian.h usability... no
checking sys/endian.h presence... no
checking for sys/endian.h... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for sys/sysctl.h... yes
checking whether be32dec is declared... no
checking whether le32dec is declared... no
checking whether be32enc is declared... no
checking whether le32enc is declared... no
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for getopt_long... yes
checking for json_loads in -ljansson... yes
checking for pthread_create in -lpthread... yes
checking for gzopen in -lz... yes
checking for SSL_library_init in -lssl... yes
checking for EVP_DigestFinal_ex in -lcrypto... yes
checking for gawk... (cached) mawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.47.0
checking for libcurl >= version 7.15.2... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating compat/Makefile
config.status: creating compat/jansson/Makefile
config.status: creating ccminer-config.h
config.status: executing depfiles commands
make all-recursive
make[1]: Entering directory '/home/m1/TPccminer'
Making all in compat
make[2]: Entering directory '/home/m1/TPccminer/compat'
make[3]: Entering directory '/home/m1/TPccminer/compat'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/m1/TPccminer/compat'
make[2]: Leaving directory '/home/m1/TPccminer/compat'
make[2]: Entering directory '/home/m1/TPccminer'
gcc -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -g -O2 -MT ccminer-crc32.o -MD -MP -MF .deps/ccminer-crc32.Tpo -c -o ccminer-crc32.o `test -f 'crc32.c' || echo './'`crc32.c
gcc -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -g -O2 -MT ccminer-hefty1.o -MD -MP -MF .deps/ccminer-hefty1.Tpo -c -o ccminer-hefty1.o `test -f 'hefty1.c' || echo './'`hefty1.c
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-ccminer.o -MD -MP -MF .deps/ccminer-ccminer.Tpo -c -o ccminer-ccminer.o `test -f 'ccminer.cpp' || echo './'`ccminer.cpp
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-pools.o -MD -MP -MF .deps/ccminer-pools.Tpo -c -o ccminer-pools.o `test -f 'pools.cpp' || echo './'`pools.cpp
mv -f .deps/ccminer-crc32.Tpo .deps/ccminer-crc32.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-util.o -MD -MP -MF .deps/ccminer-util.Tpo -c -o ccminer-util.o `test -f 'util.cpp' || echo './'`util.cpp
mv -f .deps/ccminer-hefty1.Tpo .deps/ccminer-hefty1.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-bench.o -MD -MP -MF .deps/ccminer-bench.Tpo -c -o ccminer-bench.o `test -f 'bench.cpp' || echo './'`bench.cpp
mv -f .deps/ccminer-pools.Tpo .deps/ccminer-pools.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-bignum.o -MD -MP -MF .deps/ccminer-bignum.Tpo -c -o ccminer-bignum.o `test -f 'bignum.cpp' || echo './'`bignum.cpp
mv -f .deps/ccminer-bench.Tpo .deps/ccminer-bench.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-api.o -MD -MP -MF .deps/ccminer-api.Tpo -c -o ccminer-api.o `test -f 'api.cpp' || echo './'`api.cpp
In file included from bignum.cpp:8:0:
bignum.hpp:63:24: error: invalid use of incomplete type ‘BIGNUM {aka struct bignum_st}’
class CBigNum : public BIGNUM
^
In file included from /usr/local/include/openssl/bn.h:32:0,
from bignum.hpp:20,
from bignum.cpp:8:
/usr/local/include/openssl/ossl_typ.h:80:16: note: forward declaration of ‘BIGNUM {aka struct bignum_st}’
typedef struct bignum_st BIGNUM;
^
In file included from bignum.cpp:8:0:
bignum.hpp: In constructor ‘CBigNum::CBigNum()’:
bignum.hpp:68:21: error: ‘BN_init’ was not declared in this scope
BN_init(this);
^
bignum.hpp: In copy constructor ‘CBigNum::CBigNum(const CBigNum&)’:
bignum.hpp:73:21: error: ‘BN_init’ was not declared in this scope
BN_init(this);
^
bignum.hpp:74:30: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_copy(BIGNUM*, const BIGNUM*)’
if (!BN_copy(this, &b))
^
bignum.hpp:76:31: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_clear_free(BIGNUM*)’
BN_clear_free(this);
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator=(const CBigNum&)’:
bignum.hpp:83:30: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_copy(BIGNUM*, const BIGNUM*)’
if (!BN_copy(this, &b))
^
bignum.hpp: In destructor ‘CBigNum::~CBigNum()’:
bignum.hpp:90:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_clear_free(BIGNUM*)’
BN_clear_free(this);
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(signed char)’:
bignum.hpp:94:47: error: ‘BN_init’ was not declared in this scope
CBigNum(signed char n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(short int)’:
bignum.hpp:95:47: error: ‘BN_init’ was not declared in this scope
CBigNum(short n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(int)’:
bignum.hpp:96:47: error: ‘BN_init’ was not declared in this scope
CBigNum(int n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(long int)’:
bignum.hpp:97:47: error: ‘BN_init’ was not declared in this scope
CBigNum(long n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(int64)’:
bignum.hpp:98:47: error: ‘BN_init’ was not declared in this scope
CBigNum(int64 n) { BN_init(this); setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(unsigned char)’:
bignum.hpp:99:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned char n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(short unsigned int)’:
bignum.hpp:100:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned short n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(unsigned int)’:
bignum.hpp:101:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned int n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(long unsigned int)’:
bignum.hpp:102:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned long n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(uint64)’:
bignum.hpp:103:47: error: ‘BN_init’ was not declared in this scope
CBigNum(uint64 n) { BN_init(this); setuint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(uint256)’:
bignum.hpp:104:47: error: ‘BN_init’ was not declared in this scope
explicit CBigNum(uint256 n) { BN_init(this); setuint256(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(const std::vector&)’:
bignum.hpp:108:21: error: ‘BN_init’ was not declared in this scope
BN_init(this);
^
bignum.hpp: In member function ‘void CBigNum::setulong(long unsigned int)’:
bignum.hpp:114:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
if (!BN_set_word(this, n))
^
bignum.hpp: In member function ‘long unsigned int CBigNum::getulong() const’:
bignum.hpp:120:48: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
return (unsigned long) BN_get_word(this);
^
bignum.hpp: In member function ‘unsigned int CBigNum::getuint() const’:
bignum.hpp:125:47: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
return (unsigned int) BN_get_word(this);
^
bignum.hpp: In member function ‘int CBigNum::getint() const’:
bignum.hpp:130:59: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
unsigned long n = (unsigned long) BN_get_word(this);
^
bignum.hpp:131:33: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
if (!BN_is_negative(this))
^
In file included from bignum.cpp:8:0:
bignum.hpp: In member function ‘void CBigNum::setint64(int64)’:
bignum.hpp:179:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(pch, (int) (p - pch), this);
^
bignum.hpp: In member function ‘void CBigNum::setuint64(uint64)’:
bignum.hpp:206:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(pch, (int) (p - pch), this);
^
bignum.hpp: In member function ‘void CBigNum::setuint256(uint256)’:
bignum.hpp:234:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(pch, (int) (p - pch), this);
^
bignum.hpp: In member function ‘uint256 CBigNum::getuint256() const’:
bignum.hpp:239:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
unsigned int nSize = BN_bn2mpi(this, NULL);
^
bignum.hpp:243:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
BN_bn2mpi(this, &vch[0]);
^
bignum.hpp: In member function ‘void CBigNum::setvch(const std::vector&)’:
bignum.hpp:264:52: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(&vch2[0], (int) vch2.size(), this);
^
bignum.hpp: In member function ‘std::vector CBigNum::getvch() const’:
bignum.hpp:269:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
unsigned int nSize = BN_bn2mpi(this, NULL);
^
bignum.hpp:273:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
BN_bn2mpi(this, &vch[0]);
^
bignum.hpp: In member function ‘CBigNum& CBigNum::SetCompact(unsigned int)’:
bignum.hpp:309:36: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
BN_set_word(this, nWord);
^
bignum.hpp:313:36: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
BN_set_word(this, nWord);
^
bignum.hpp:314:46: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
BN_lshift(this, this, 8*(nSize-3));
^
bignum.hpp:316:40: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_set_negative(BIGNUM*, int)’
BN_set_negative(this, fNegative);
^
In file included from bignum.hpp:20:0,
from bignum.cpp:8:
bignum.hpp: In member function ‘unsigned int CBigNum::GetCompact() const’:
bignum.hpp:322:30: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_num_bits(const BIGNUM*)’
unsigned int nSize = BN_num_bytes(this);
^
In file included from bignum.cpp:8:0:
bignum.hpp:325:55: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
nCompact = (unsigned int) BN_get_word(this) << 8*(3-nSize);
^
bignum.hpp:329:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rshift(BIGNUM*, const BIGNUM*, int)’
BN_rshift(&bn, this, 8*(nSize-3));
^
bignum.hpp:330:54: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
nCompact = (unsigned int) BN_get_word(&bn);
^
bignum.hpp:340:41: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
nCompact |= (BN_is_negative(this) ? 0x00800000 : 0);
^
In file included from bignum.cpp:8:0:
bignum.hpp: In member function ‘std::__cxx11::string CBigNum::ToString(int) const’:
bignum.hpp:381:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_set_negative(BIGNUM*, int)’
BN_set_negative(&bn, false);
^
bignum.hpp:384:29: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
if (BN_cmp(&bn, &bn0) == 0)
^
bignum.hpp:386:32: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
while (BN_cmp(&bn, &bn0) > 0)
^
bignum.hpp:388:54: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_div(&dv, &rem, &bn, &bnBase, pctx))
^
bignum.hpp:394:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
if (BN_is_negative(this))
^
bignum.hpp: In member function ‘bool CBigNum::operator!() const’:
bignum.hpp:427:31: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_zero(const BIGNUM*)’
return BN_is_zero(this);
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator+=(const CBigNum&)’:
bignum.hpp:432:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_add(this, this, &b))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator*=(const CBigNum&)’:
bignum.hpp:446:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_mul(this, this, &b, pctx))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator<<=(unsigned int)’:
bignum.hpp:465:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
if (!BN_lshift(this, this, shift))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator>>=(unsigned int)’:
bignum.hpp:476:28: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
if (BN_cmp(&a, this) > 0)
^
bignum.hpp:482:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rshift(BIGNUM*, const BIGNUM*, int)’
if (!BN_rshift(this, this, shift))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator++()’:
bignum.hpp:491:47: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_add(this, this, BN_value_one()))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator--()’:
bignum.hpp:508:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_sub(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_sub(&r, this, BN_value_one()))
^
bignum.hpp: In function ‘const CBigNum operator+(const CBigNum&, const CBigNum&)’:
bignum.hpp:533:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_add(&r, &a, &b))
^
bignum.hpp: In function ‘const CBigNum operator-(const CBigNum&, const CBigNum&)’:
bignum.hpp:541:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_sub(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_sub(&r, &a, &b))
^
bignum.hpp: In function ‘const CBigNum operator-(const CBigNum&)’:
bignum.hpp:549:43: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
BN_set_negative(&r, !BN_is_negative(&r));
^
bignum.hpp: In function ‘const CBigNum operator*(const CBigNum&, const CBigNum&)’:
bignum.hpp:557:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_mul(&r, &a, &b, pctx))
^
bignum.hpp: In function ‘const CBigNum operator/(const CBigNum&, const CBigNum&)’:
bignum.hpp:566:39: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_div(&r, NULL, &a, &b, pctx))
^
In file included from bignum.hpp:20:0,
from bignum.cpp:8:
bignum.hpp: In function ‘const CBigNum operator%(const CBigNum&, const CBigNum&)’:
bignum.hpp:575:10: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘2’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_mod(&r, &a, &b, pctx))
^
In file included from bignum.cpp:8:0:
bignum.hpp: In function ‘const CBigNum operator<<(const CBigNum&, unsigned int)’:
bignum.hpp:583:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
if (!BN_lshift(&r, &a, shift))
^
bignum.hpp: In function ‘bool operator==(const CBigNum&, const CBigNum&)’:
bignum.hpp:595:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator==(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) == 0); }
^
bignum.hpp: In function ‘bool operator!=(const CBigNum&, const CBigNum&)’:
bignum.hpp:596:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator!=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) != 0); }
^
bignum.hpp: In function ‘bool operator<=(const CBigNum&, const CBigNum&)’:
bignum.hpp:597:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator<=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) <= 0); }
^
bignum.hpp: In function ‘bool operator>=(const CBigNum&, const CBigNum&)’:
bignum.hpp:598:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator>=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) >= 0); }
^
bignum.hpp: In function ‘bool operator<(const CBigNum&, const CBigNum&)’:
bignum.hpp:599:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator<(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) < 0); }
^
bignum.hpp: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
bignum.hpp:600:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator>(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) > 0); }
^
Makefile:1795: recipe for target 'ccminer-bignum.o' failed
make[2]: *** [ccminer-bignum.o] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/ccminer-api.Tpo .deps/ccminer-api.Po
mv -f .deps/ccminer-util.Tpo .deps/ccminer-util.Po
mv -f .deps/ccminer-ccminer.Tpo .deps/ccminer-ccminer.Po
make[2]: Leaving directory '/home/m1/TPccminer'
Makefile:2165: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/m1/TPccminer'
Makefile:654: recipe for target 'all' failed
make: *** [all] Error 2
m1@19_1_4:~/TPccminer$
Making distclean in compat
make[1]: Entering directory '/home/m1/TPccminer/compat'
Making distclean in jansson
make[2]: Entering directory '/home/m1/TPccminer/compat/jansson'
test -z "libjansson.a" || rm -f libjansson.a
rm -f *.o
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm -f Makefile
make[2]: Leaving directory '/home/m1/TPccminer/compat/jansson'
make[2]: Entering directory '/home/m1/TPccminer/compat'
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory '/home/m1/TPccminer/compat'
rm -f Makefile
make[1]: Leaving directory '/home/m1/TPccminer/compat'
make[1]: Entering directory '/home/m1/TPccminer'
test -z "ccminer" || rm -f ccminer
rm -f *.o
rm -f Algo256/*.o
rm -f JHA/*.o
rm -f compat/*.o
rm -f crypto/*.o
rm -f crypto/cpu/*.o
rm -f equi/*.o
rm -f equi/blake2/*.o
rm -f heavy/*.o
rm -f lbry/*.o
rm -f lyra2/*.o
rm -f neoscrypt/*.o
rm -f quark/*.o
rm -f qubit/*.o
rm -f scrypt/*.o
rm -f sha256/*.o
rm -f sia/*.o
rm -f skunk/*.o
rm -f sph/*.o
rm -f x11/*.o
rm -f x13/*.o
rm -f x15/*.o
rm -f x17/*.o
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f Algo256/.deps/.dirstamp
rm -f Algo256/.dirstamp
rm -f JHA/.deps/.dirstamp
rm -f JHA/.dirstamp
rm -f compat/.deps/.dirstamp
rm -f compat/.dirstamp
rm -f crypto/.deps/.dirstamp
rm -f crypto/.dirstamp
rm -f crypto/cpu/.deps/.dirstamp
rm -f crypto/cpu/.dirstamp
rm -f equi/.deps/.dirstamp
rm -f equi/.dirstamp
rm -f equi/blake2/.deps/.dirstamp
rm -f equi/blake2/.dirstamp
rm -f heavy/.deps/.dirstamp
rm -f heavy/.dirstamp
rm -f lbry/.deps/.dirstamp
rm -f lbry/.dirstamp
rm -f lyra2/.deps/.dirstamp
rm -f lyra2/.dirstamp
rm -f neoscrypt/.deps/.dirstamp
rm -f neoscrypt/.dirstamp
rm -f quark/.deps/.dirstamp
rm -f quark/.dirstamp
rm -f qubit/.deps/.dirstamp
rm -f qubit/.dirstamp
rm -f scrypt/.deps/.dirstamp
rm -f scrypt/.dirstamp
rm -f sha256/.deps/.dirstamp
rm -f sha256/.dirstamp
rm -f sia/.deps/.dirstamp
rm -f sia/.dirstamp
rm -f skunk/.deps/.dirstamp
rm -f skunk/.dirstamp
rm -f sph/.deps/.dirstamp
rm -f sph/.dirstamp
rm -f x11/.deps/.dirstamp
rm -f x11/.dirstamp
rm -f x13/.deps/.dirstamp
rm -f x13/.dirstamp
rm -f x15/.deps/.dirstamp
rm -f x15/.dirstamp
rm -f x17/.deps/.dirstamp
rm -f x17/.dirstamp
rm -f ccminer-config.h stamp-h1
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/home/m1/TPccminer'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./.deps compat/.deps crypto/.deps crypto/cpu/.deps equi/.deps equi/blake2/.deps lyra2/.deps neoscrypt/.deps sia/.deps sph/.deps
rm -f Makefile
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for gcc option to accept ISO C99... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking dependency style of gcc... gcc3
checking for ranlib... ranlib
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for gcc option to support OpenMP... -fopenmp
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking sys/endian.h usability... no
checking sys/endian.h presence... no
checking for sys/endian.h... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for sys/sysctl.h... yes
checking whether be32dec is declared... no
checking whether le32dec is declared... no
checking whether be32enc is declared... no
checking whether le32enc is declared... no
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for getopt_long... yes
checking for json_loads in -ljansson... yes
checking for pthread_create in -lpthread... yes
checking for gzopen in -lz... yes
checking for SSL_library_init in -lssl... yes
checking for EVP_DigestFinal_ex in -lcrypto... yes
checking for gawk... (cached) mawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.47.0
checking for libcurl >= version 7.15.2... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating compat/Makefile
config.status: creating compat/jansson/Makefile
config.status: creating ccminer-config.h
config.status: executing depfiles commands
make all-recursive
make[1]: Entering directory '/home/m1/TPccminer'
Making all in compat
make[2]: Entering directory '/home/m1/TPccminer/compat'
make[3]: Entering directory '/home/m1/TPccminer/compat'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/m1/TPccminer/compat'
make[2]: Leaving directory '/home/m1/TPccminer/compat'
make[2]: Entering directory '/home/m1/TPccminer'
gcc -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -g -O2 -MT ccminer-crc32.o -MD -MP -MF .deps/ccminer-crc32.Tpo -c -o ccminer-crc32.o `test -f 'crc32.c' || echo './'`crc32.c
gcc -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -g -O2 -MT ccminer-hefty1.o -MD -MP -MF .deps/ccminer-hefty1.Tpo -c -o ccminer-hefty1.o `test -f 'hefty1.c' || echo './'`hefty1.c
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-ccminer.o -MD -MP -MF .deps/ccminer-ccminer.Tpo -c -o ccminer-ccminer.o `test -f 'ccminer.cpp' || echo './'`ccminer.cpp
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-pools.o -MD -MP -MF .deps/ccminer-pools.Tpo -c -o ccminer-pools.o `test -f 'pools.cpp' || echo './'`pools.cpp
mv -f .deps/ccminer-crc32.Tpo .deps/ccminer-crc32.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-util.o -MD -MP -MF .deps/ccminer-util.Tpo -c -o ccminer-util.o `test -f 'util.cpp' || echo './'`util.cpp
mv -f .deps/ccminer-hefty1.Tpo .deps/ccminer-hefty1.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-bench.o -MD -MP -MF .deps/ccminer-bench.Tpo -c -o ccminer-bench.o `test -f 'bench.cpp' || echo './'`bench.cpp
mv -f .deps/ccminer-pools.Tpo .deps/ccminer-pools.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-bignum.o -MD -MP -MF .deps/ccminer-bignum.Tpo -c -o ccminer-bignum.o `test -f 'bignum.cpp' || echo './'`bignum.cpp
mv -f .deps/ccminer-bench.Tpo .deps/ccminer-bench.Po
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I/usr/local/cuda/include -DUSE_WRAPNVML -O3 -march=native -D_REENTRANT -falign-functions=16 -falign-jumps=16 -falign-labels=16 -MT ccminer-api.o -MD -MP -MF .deps/ccminer-api.Tpo -c -o ccminer-api.o `test -f 'api.cpp' || echo './'`api.cpp
In file included from bignum.cpp:8:0:
bignum.hpp:63:24: error: invalid use of incomplete type ‘BIGNUM {aka struct bignum_st}’
class CBigNum : public BIGNUM
^
In file included from /usr/local/include/openssl/bn.h:32:0,
from bignum.hpp:20,
from bignum.cpp:8:
/usr/local/include/openssl/ossl_typ.h:80:16: note: forward declaration of ‘BIGNUM {aka struct bignum_st}’
typedef struct bignum_st BIGNUM;
^
In file included from bignum.cpp:8:0:
bignum.hpp: In constructor ‘CBigNum::CBigNum()’:
bignum.hpp:68:21: error: ‘BN_init’ was not declared in this scope
BN_init(this);
^
bignum.hpp: In copy constructor ‘CBigNum::CBigNum(const CBigNum&)’:
bignum.hpp:73:21: error: ‘BN_init’ was not declared in this scope
BN_init(this);
^
bignum.hpp:74:30: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_copy(BIGNUM*, const BIGNUM*)’
if (!BN_copy(this, &b))
^
bignum.hpp:76:31: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_clear_free(BIGNUM*)’
BN_clear_free(this);
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator=(const CBigNum&)’:
bignum.hpp:83:30: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_copy(BIGNUM*, const BIGNUM*)’
if (!BN_copy(this, &b))
^
bignum.hpp: In destructor ‘CBigNum::~CBigNum()’:
bignum.hpp:90:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_clear_free(BIGNUM*)’
BN_clear_free(this);
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(signed char)’:
bignum.hpp:94:47: error: ‘BN_init’ was not declared in this scope
CBigNum(signed char n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(short int)’:
bignum.hpp:95:47: error: ‘BN_init’ was not declared in this scope
CBigNum(short n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(int)’:
bignum.hpp:96:47: error: ‘BN_init’ was not declared in this scope
CBigNum(int n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(long int)’:
bignum.hpp:97:47: error: ‘BN_init’ was not declared in this scope
CBigNum(long n) { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(int64)’:
bignum.hpp:98:47: error: ‘BN_init’ was not declared in this scope
CBigNum(int64 n) { BN_init(this); setint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(unsigned char)’:
bignum.hpp:99:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned char n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(short unsigned int)’:
bignum.hpp:100:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned short n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(unsigned int)’:
bignum.hpp:101:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned int n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(long unsigned int)’:
bignum.hpp:102:47: error: ‘BN_init’ was not declared in this scope
CBigNum(unsigned long n) { BN_init(this); setulong(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(uint64)’:
bignum.hpp:103:47: error: ‘BN_init’ was not declared in this scope
CBigNum(uint64 n) { BN_init(this); setuint64(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(uint256)’:
bignum.hpp:104:47: error: ‘BN_init’ was not declared in this scope
explicit CBigNum(uint256 n) { BN_init(this); setuint256(n); }
^
bignum.hpp: In constructor ‘CBigNum::CBigNum(const std::vector
bignum.hpp:108:21: error: ‘BN_init’ was not declared in this scope
BN_init(this);
^
bignum.hpp: In member function ‘void CBigNum::setulong(long unsigned int)’:
bignum.hpp:114:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
if (!BN_set_word(this, n))
^
bignum.hpp: In member function ‘long unsigned int CBigNum::getulong() const’:
bignum.hpp:120:48: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
return (unsigned long) BN_get_word(this);
^
bignum.hpp: In member function ‘unsigned int CBigNum::getuint() const’:
bignum.hpp:125:47: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
return (unsigned int) BN_get_word(this);
^
bignum.hpp: In member function ‘int CBigNum::getint() const’:
bignum.hpp:130:59: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
unsigned long n = (unsigned long) BN_get_word(this);
^
bignum.hpp:131:33: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
if (!BN_is_negative(this))
^
In file included from bignum.cpp:8:0:
bignum.hpp: In member function ‘void CBigNum::setint64(int64)’:
bignum.hpp:179:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(pch, (int) (p - pch), this);
^
bignum.hpp: In member function ‘void CBigNum::setuint64(uint64)’:
bignum.hpp:206:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(pch, (int) (p - pch), this);
^
bignum.hpp: In member function ‘void CBigNum::setuint256(uint256)’:
bignum.hpp:234:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(pch, (int) (p - pch), this);
^
bignum.hpp: In member function ‘uint256 CBigNum::getuint256() const’:
bignum.hpp:239:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
unsigned int nSize = BN_bn2mpi(this, NULL);
^
bignum.hpp:243:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
BN_bn2mpi(this, &vch[0]);
^
bignum.hpp: In member function ‘void CBigNum::setvch(const std::vector
bignum.hpp:264:52: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
BN_mpi2bn(&vch2[0], (int) vch2.size(), this);
^
bignum.hpp: In member function ‘std::vector
bignum.hpp:269:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
unsigned int nSize = BN_bn2mpi(this, NULL);
^
bignum.hpp:273:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
BN_bn2mpi(this, &vch[0]);
^
bignum.hpp: In member function ‘CBigNum& CBigNum::SetCompact(unsigned int)’:
bignum.hpp:309:36: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
BN_set_word(this, nWord);
^
bignum.hpp:313:36: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
BN_set_word(this, nWord);
^
bignum.hpp:314:46: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
BN_lshift(this, this, 8*(nSize-3));
^
bignum.hpp:316:40: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_set_negative(BIGNUM*, int)’
BN_set_negative(this, fNegative);
^
In file included from bignum.hpp:20:0,
from bignum.cpp:8:
bignum.hpp: In member function ‘unsigned int CBigNum::GetCompact() const’:
bignum.hpp:322:30: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_num_bits(const BIGNUM*)’
unsigned int nSize = BN_num_bytes(this);
^
In file included from bignum.cpp:8:0:
bignum.hpp:325:55: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
nCompact = (unsigned int) BN_get_word(this) << 8*(3-nSize);
^
bignum.hpp:329:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rshift(BIGNUM*, const BIGNUM*, int)’
BN_rshift(&bn, this, 8*(nSize-3));
^
bignum.hpp:330:54: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
nCompact = (unsigned int) BN_get_word(&bn);
^
bignum.hpp:340:41: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
nCompact |= (BN_is_negative(this) ? 0x00800000 : 0);
^
In file included from bignum.cpp:8:0:
bignum.hpp: In member function ‘std::__cxx11::string CBigNum::ToString(int) const’:
bignum.hpp:381:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_set_negative(BIGNUM*, int)’
BN_set_negative(&bn, false);
^
bignum.hpp:384:29: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
if (BN_cmp(&bn, &bn0) == 0)
^
bignum.hpp:386:32: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
while (BN_cmp(&bn, &bn0) > 0)
^
bignum.hpp:388:54: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_div(&dv, &rem, &bn, &bnBase, pctx))
^
bignum.hpp:394:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
if (BN_is_negative(this))
^
bignum.hpp: In member function ‘bool CBigNum::operator!() const’:
bignum.hpp:427:31: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_zero(const BIGNUM*)’
return BN_is_zero(this);
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator+=(const CBigNum&)’:
bignum.hpp:432:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_add(this, this, &b))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator*=(const CBigNum&)’:
bignum.hpp:446:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_mul(this, this, &b, pctx))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator<<=(unsigned int)’:
bignum.hpp:465:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
if (!BN_lshift(this, this, shift))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator>>=(unsigned int)’:
bignum.hpp:476:28: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
if (BN_cmp(&a, this) > 0)
^
bignum.hpp:482:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rshift(BIGNUM*, const BIGNUM*, int)’
if (!BN_rshift(this, this, shift))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator++()’:
bignum.hpp:491:47: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_add(this, this, BN_value_one()))
^
bignum.hpp: In member function ‘CBigNum& CBigNum::operator--()’:
bignum.hpp:508:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_sub(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_sub(&r, this, BN_value_one()))
^
bignum.hpp: In function ‘const CBigNum operator+(const CBigNum&, const CBigNum&)’:
bignum.hpp:533:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_add(&r, &a, &b))
^
bignum.hpp: In function ‘const CBigNum operator-(const CBigNum&, const CBigNum&)’:
bignum.hpp:541:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_sub(BIGNUM*, const BIGNUM*, const BIGNUM*)’
if (!BN_sub(&r, &a, &b))
^
bignum.hpp: In function ‘const CBigNum operator-(const CBigNum&)’:
bignum.hpp:549:43: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
BN_set_negative(&r, !BN_is_negative(&r));
^
bignum.hpp: In function ‘const CBigNum operator*(const CBigNum&, const CBigNum&)’:
bignum.hpp:557:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_mul(&r, &a, &b, pctx))
^
bignum.hpp: In function ‘const CBigNum operator/(const CBigNum&, const CBigNum&)’:
bignum.hpp:566:39: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_div(&r, NULL, &a, &b, pctx))
^
In file included from bignum.hpp:20:0,
from bignum.cpp:8:
bignum.hpp: In function ‘const CBigNum operator%(const CBigNum&, const CBigNum&)’:
bignum.hpp:575:10: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘2’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
if (!BN_mod(&r, &a, &b, pctx))
^
In file included from bignum.cpp:8:0:
bignum.hpp: In function ‘const CBigNum operator<<(const CBigNum&, unsigned int)’:
bignum.hpp:583:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
if (!BN_lshift(&r, &a, shift))
^
bignum.hpp: In function ‘bool operator==(const CBigNum&, const CBigNum&)’:
bignum.hpp:595:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator==(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) == 0); }
^
bignum.hpp: In function ‘bool operator!=(const CBigNum&, const CBigNum&)’:
bignum.hpp:596:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator!=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) != 0); }
^
bignum.hpp: In function ‘bool operator<=(const CBigNum&, const CBigNum&)’:
bignum.hpp:597:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator<=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) <= 0); }
^
bignum.hpp: In function ‘bool operator>=(const CBigNum&, const CBigNum&)’:
bignum.hpp:598:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator>=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) >= 0); }
^
bignum.hpp: In function ‘bool operator<(const CBigNum&, const CBigNum&)’:
bignum.hpp:599:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator<(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) < 0); }
^
bignum.hpp: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
bignum.hpp:600:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
inline bool operator>(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) > 0); }
^
Makefile:1795: recipe for target 'ccminer-bignum.o' failed
make[2]: *** [ccminer-bignum.o] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/ccminer-api.Tpo .deps/ccminer-api.Po
mv -f .deps/ccminer-util.Tpo .deps/ccminer-util.Po
mv -f .deps/ccminer-ccminer.Tpo .deps/ccminer-ccminer.Po
make[2]: Leaving directory '/home/m1/TPccminer'
Makefile:2165: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/m1/TPccminer'
Makefile:654: recipe for target 'all' failed
make: *** [all] Error 2
m1@19_1_4:~/TPccminer$
I think BTCZ was removed from Whattomine. Any idea why?
Seems like there was a problem, I noticed this morning that it was on top with constant profit for more than 5 hours
If you use wtm auto switch and it still mining btcz , just open WTM_top_coin and change it from btcz to one of your other coins
It will grab new data and continue until btcz comes online again
Not sure about WTM but their phone wallet dev has left the team. (@meligo has informed me about this)
https://bitcointalksearch.org/topic/m.24607290
These things do happen with coins, its kind of buzz sometimes pushes a coin into different places, but hey ho, please keep your coins in safe place accordingly.
I think BTCZ was removed from Whattomine. Any idea why?
Seems like there was a problem, I noticed this morning that it was on top with constant profit for more than 5 hours
If you use wtm auto switch and it still mining btcz , just open WTM_top_coin and change it from btcz to one of your other coins
It will grab new data and continue until btcz comes online again
I think BTCZ was removed from Whattomine. Any idea why?
try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend
Good to know other coins too, i only know BSD so far
you mind sharing your OC settings while mining xevan, i also use 1060 too so
Thanks in advance.
my rig core=150 memory=100 in 1bash, ccminer add -i 19
is working on my rig
, but im not sure is the best setting try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend
Good to know other coins too, i only know BSD so far
you mind sharing your OC settings while mining xevan, i also use 1060 too so
Thanks in advance.
try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend
try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
It is used to mine BSD and we currently don't have any ccminer forks supporting this algo.
We also have instructions on here http://nvoc-mining-os.com/2017/11/13/add-ccminer-xevan-nvoc/
@Stubo you doing a great job, i would love to have you on board on our discord channel
try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are: but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips
1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
from /home/m1/XXX do a wget to get a proper openssl:
wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
tar zxvf openssl-1.0.1g.tar.gz
Make backup of bh.h and copy over the new version
sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
cd /home/m1/XXX/ccminer-xevan-master
vi configure.sh
change
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
to
CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so
after that, you should be able to build normally by executing build.sh
Hope this helps.
Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz
You are right, I got the same error you mentioned above
and I try on the version you provided, it working great
thank you so much
Another IAmNotAJeep_and_Maxximus007_WATCHDOG Mod
I had my Verizon FIOS service upgraded the other day and I was unable to shutdown all of my miners before the tech interrupted my internet. This made me scrutinize how the watchdog handles that situation (not very well, IMO) so I made the following modification to just wait on internet service to return rather than just looping, restarting mining, and restarting the host as usual.
if [ $COUNT -le 0 ]
then
# Begin Stubo Mod
# Wait for Internet
while ! nc -vzw1 google.com 443;
do
echo "Internet is down, checking again in 30 seconds..." | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
sleep 30
done
#
# INTERNET_IS_GO=0
#
# if nc -vzw1 google.com 443;
# #if nc -vzw1 $POOL 80;
# then
# INTERNET_IS_GO=1
# fi
echo ""
# if [[ $RESTART -gt 4 && $INTERNET_IS_GO == 1 ]]
if [ $RESTART -gt 4 ]
# End Stubo Mod
then
echo "$(date) - Utilization is too low: reviving did not work so restarting system in 10 seconds" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
Let me know if you have any questions or see room for improvement in this modification.
I had my Verizon FIOS service upgraded the other day and I was unable to shutdown all of my miners before the tech interrupted my internet. This made me scrutinize how the watchdog handles that situation (not very well, IMO) so I made the following modification to just wait on internet service to return rather than just looping, restarting mining, and restarting the host as usual.
Code:
if [ $COUNT -le 0 ]
then
# Begin Stubo Mod
# Wait for Internet
while ! nc -vzw1 google.com 443;
do
echo "Internet is down, checking again in 30 seconds..." | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
sleep 30
done
#
# INTERNET_IS_GO=0
#
# if nc -vzw1 google.com 443;
# #if nc -vzw1 $POOL 80;
# then
# INTERNET_IS_GO=1
# fi
echo ""
# if [[ $RESTART -gt 4 && $INTERNET_IS_GO == 1 ]]
if [ $RESTART -gt 4 ]
# End Stubo Mod
then
echo "$(date) - Utilization is too low: reviving did not work so restarting system in 10 seconds" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
Let me know if you have any questions or see room for improvement in this modification.
I just made some changes to your addition so after checking google for internet it checks coin pool server then it goes for the rest of its job ...
Because I'm not using any dual coin mining and salfter switches I havent gone through the hassle of checking their pool too.
Please check, test and let me know what you think
Code:
if [ $COUNT -le 0 ]
then
# Begin Stubo Mod
# Wait for Internet
while ! nc -vzw1 google.com 443;
do
echo "Internet is down, checking again in 30 seconds..." | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
sleep 30
done
# Begin papampi Mod
source /home/m1/1bash
CURRENT_COIN=$(head -n 200 /home/m1/1bash | grep COIN= | sed 's/COIN=//' | sed 's/\"//' | sed 's/\"//')
#echo "$CURRENT_COIN"
CURRENT_COIN_POOL=$(echo {$CURRENT_COIN}_POOL |sed 's/{//' | sed 's/}//' )
#echo $CURRENT_COIN_POOL
POOL_SERVER=$(cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//')
#echo "$POOL_SERVER"
CURRENT_COIN_PORT=$(echo {$CURRENT_COIN}_PORT | sed 's/{//' | sed 's/}//')
#echo "$CURRENT_COIN_PORT"
if [[ $POOL_SERVER == *stratum* ]]
then
#echo "stratum"
PING_SERVER=$( cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//' | sed 's/stratum+tcp\?:\/\///' | cut -d':' -f1 )
#echo "Server: $PING_SERVER"
PING_PORT=$(cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//' | sed 's/stratum+tcp\?:\/\///' | grep -Eo '[0-9]+$' )
#echo "Port: $PING_PORT"
if nc -vzw2 $PING_SERVER $PING_PORT;
then
# echo "Strartum Server, INTERNET_IS_GO=1"
INTERNET_IS_GO=1
else
echo "WARNING: $(date) - Mining Pool Stratum Server is DOWN" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
INTERNET_IS_GO=0
fi
elif [[ $CURRENT_COIN == *DUAL* || $CURRENT_COIN == *ZPOOL_SKUNK* || $CURRENT_COIN == *SALFTER* ]]
then
#echo "Dual mining, check google"
if nc -vzw2 google.com 443
then
# echo "Dual mining, google is up"
#echo " INTERNET_IS_GO=1"
INTERNET_IS_GO=1
else
#echo "Dual mining, google is down"
echo "WARNING: $(date) - Cant reach google" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
INTERNET_IS_GO=0
fi
else
PING_SERVER=$( cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//')
#echo "Server: $PING_SERVER"
PING_PORT=$(cat /home/m1/1bash | grep $CURRENT_COIN_PORT | grep -o '".*"' | sed 's/"//' |sed 's/"//')
#echo "Port: $PING_PORT"
if nc -vzw1 $PING_SERVER $PING_PORT
then
#echo "Not a stratum server,INTERNET_IS_GO=1" | tee -a ${LOG_FILE}
INTERNET_IS_GO=1
else
echo "WARNING: $(date) - Mining Pool Server is DOWN" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
INTERNET_IS_GO=0
fi
fi
# End papampi Mod
# INTERNET_IS_GO=0
# if nc -vzw1 google.com 443;
# #if nc -vzw1 $POOL 80;
# then
# INTERNET_IS_GO=1
# fi
echo ""
if [[ $RESTART -gt 4 && $INTERNET_IS_GO == 1 ]]
# if [ $RESTART -gt 4 ]
# End Stubo Mod
then
echo "$(date) - Utilization is too low: reviving did not work so restarting system in 10 seconds" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
Edited to add server port too.
wow, what a cool project!!
Sorry to barge in like this. I am only on page 7 so far and am sure the answer to my question is in the next 273 pages
Is there a way to run a script or is there a list of things to install on an existing Ubuntu LTS?
My rig is our media center and file share server, but would like to add a dozen cards or so (asus mining expert) to do some mining, as it is idle most of the time.
Thanks
366Cobra
Sorry to barge in like this. I am only on page 7 so far and am sure the answer to my question is in the next 273 pages
Is there a way to run a script or is there a list of things to install on an existing Ubuntu LTS?
My rig is our media center and file share server, but would like to add a dozen cards or so (asus mining expert) to do some mining, as it is idle most of the time.
Thanks
366Cobra
I think its easier to reformat your existing ubuntu and install nvOC then install and set samba, nfs,... and any thing else you need for your media center instead of going through installing and setting up nvOC over an existing ubuntu.
wow, what a cool project!!
Sorry to barge in like this. I am only on page 7 so far and am sure the answer to my question is in the next 273 pages
Is there a way to run a script or is there a list of things to install on an existing Ubuntu LTS?
My rig is our media center and file share server, but would like to add a dozen cards or so (asus mining expert) to do some mining, as it is idle most of the time.
Thanks
366Cobra
Sorry to barge in like this. I am only on page 7 so far and am sure the answer to my question is in the next 273 pages
Is there a way to run a script or is there a list of things to install on an existing Ubuntu LTS?
My rig is our media center and file share server, but would like to add a dozen cards or so (asus mining expert) to do some mining, as it is idle most of the time.
Thanks
366Cobra
Yes. Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1main.
Thanks for the answer
about proper place, did you mean 3main?
I think he meant 1bash.
Nice_equihash already included, just select it as coin
Yes. Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1main.
Thanks for the answer
about proper place, did you mean 3main?
I think he meant 1bash.
Yes. Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1main.
Thanks for the answer
about proper place, did you mean 3main?
Jump to: