[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 179.

weeminer

newbie

Activity: 7

Merit: 0

I also have the same issue but after reapplied few times the overclock setting it works..keep trying setting each card with individual clock setting

Quote from: AnusXpander on March 30, 2018, 04:52:33 AM

Thanks for answering, I can try but i don't think that's a proper solution since it happens with multiple GPUs in same rig. Usualy clocks are set bad after reboot, next I have to reload miner, clocks are fine but after a while they are starting to lower clock settings.Look at those examples:

ETH - Total Speed: 360.276 Mh/s, Total Shares: 20, Rejected: 0, Time: 00:09
ETH: GPU0 26.656 Mh/s, GPU1 26.666 Mh/s, GPU2 30.689 Mh/s, GPU3 30.672 Mh/s, GPU4 30.594 Mh/s, GPU5 30.826 Mh/s, GPU6 30.629 Mh/s, GPU7 30.442 Mh/s, GPU8 30.745 Mh/s, GPU9 30.802 Mh/s, GPU10 30.754 Mh/s, GPU11 30.802 Mh/s

ETH - Total Speed: 363.554 Mh/s, Total Shares: 1280, Rejected: 0, Time: 09:52
ETH: GPU0 26.617 Mh/s, GPU1 26.635 Mh/s, GPU2 30.792 Mh/s, GPU3 31.130 Mh/s, GPU4 30.638 Mh/s, GPU5 31.160 Mh/s, GPU6 31.118 Mh/s, GPU7 30.946 Mh/s, GPU8 31.180 Mh/s, GPU9 31.155 Mh/s, GPU10 31.000 Mh/s, GPU11 31.184 Mh/s

Sometimes almost all of them are in default setting or lower than I desire.

Quote

If you attached a monitor on GPU0, will that fix the problem?

I have a few older rigs with RX480 Reference, with first 2 GPUs (6xRX480) always acting up.

Solution was to use a dummy HDMI adapter, and problem went away.

Blynda

newbie

Activity: 11

Merit: 0

Hello guys , which miner program you use for ETH , currently using claymore is it still the best one ?

Alyeska

jr. member

Activity: 50

Merit: 1

Quote from: Bimmber on March 30, 2018, 11:15:00 PM

Tytanick,

Please update this miner to 0.2:

https://github.com/brian112358/nevermore-miner/releases/

This Please!!!

Bimmber

newbie

Activity: 210

Merit: 0

Tytanick,

Please update this miner to 0.2:

https://github.com/brian112358/nevermore-miner/releases/

And bminer to latest 6.0.1
https://www.bminer.me/releases/

aussiegwapo

newbie

Activity: 42

Merit: 0

Hi all

Im new to Lexin OS used to be windows 10 clocking was easy with afterburner

Is there a way to run amd 3x rx470 and 5 x nvidia cards to gether running a asus b250 expert mining board using simplemining OS as i can see there three different OS
Is i have installed NvOS but can only clock my nvidia
or do i have to run RX OS to be able to run clock settings rite for all my cards on one board

woodeneck

newbie

Activity: 1

Merit: 0

What's the config for raven coin and supernova?

Sledge0001

full member

Activity: 633

Merit: 159

Make sure you fill the full size slot first....

The follow up by filling the black slots starting with the closest to the CPU first... After that fill in the white slots..

I've seen 1 of my rigs revert back to using DHCP on a few occasions which is a PITA...

Quote from: minebomb on March 30, 2018, 03:07:14 PM

@tytanick or any admin

Need some advice.
Is there a specific order of pci slots to follow on Asrock h110 pro. Does the standard(full size) onboard pci slot have to be utilized? Does installing on random slots cause issues?

With reference to another rig that normally runs very well with one exception.
I have closely monitored this rig on ssh console for strange behavior but cannot find anything wrong.
Literally once a day, the rig goes offline in the simplemining dashboard monitor.
The problem is that the rig is still physically running and the energy meter shows +-700wats off usage during this state. I cannot ssh when this happens. Is it some kind of halt state?
The rig still is active on my network and I usually set static ip address on miners so it isn't a dhcp issue.

Rig spec :
Max power draw when functioning normally is +-2100w
9x 1080ti rig
Celeron cpu
4gb ram
Standard usb 32gb

minebomb

newbie

Activity: 20

Merit: 0

@tytanick or any admin

Need some advice.
Is there a specific order of pci slots to follow on Asrock h110 pro. Does the standard(full size) onboard pci slot have to be utilized? Does installing on random slots cause issues?

With reference to another rig that normally runs very well with one exception.
I have closely monitored this rig on ssh console for strange behavior but cannot find anything wrong.
Literally once a day, the rig goes offline in the simplemining dashboard monitor.
The problem is that the rig is still physically running and the energy meter shows +-700wats off usage during this state. I cannot ssh when this happens. Is it some kind of halt state?
The rig still is active on my network and I usually set static ip address on miners so it isn't a dhcp issue.

Rig spec :
Max power draw when functioning normally is +-2100w
9x 1080ti rig
Celeron cpu
4gb ram
Standard usb 32gb

velbet

member

Activity: 448

Merit: 88

Quote from: tytanick on March 30, 2018, 05:48:21 AM

Quote from: AnusXpander on March 30, 2018, 01:33:03 AM

Tytanick, why You don't want to help me?

I want, but please write to [email protected]
We have support team there

Here on bitcointalk we do not do much helping.

So please write email, cryptoscum most probably will help You.
Also you could check if you have all bios options from HELP menu in simplemining.net

Motherboard settings - MUST HAVE:
1) Make sure you are running the latest BIOS! (you can also try older ones if newest isnt working)
2) Set device to boot from USB/pendrive !
3) Disable Sound audio card !
4) Enable 4G encode !
5) Set PCIe support to Auto or GEN2 !
6) Enable onboard graphics to default (PEG - > IDG)
7) Set also: power ON on AC power lost, disable virtualisation
Cool

Plug your monitor into the ONBOARD graphics if you want to take a look on boot process

About xmr-stak 2.3.0 version.
I will implement it after easter holidays. So 3-5 April.
And the hardfork will occur at 6 April so it will be all good

This miner requires some extra library and i do not want to deploy it to all rigs so i need to make some little change first in my scripts.
Anyway curenlty the xmr amd and nvidia miners are up so you can use them also

Guys, do you have some problems that stats disappear in dashboard ?
Can You guys tell me if this is happening only in claymore or in other miners too ? I mean empty core.memory field in dashboard.

My Ravenminer stats disapper last night.
EDIT: Still same.

jombolo

newbie

Activity: 23

Merit: 0

Quote from: jombolo on March 27, 2018, 03:53:07 PM

has anyone done a recent comparison of optiminer-equihash2.1.2 and dstm-v0.6.0 w/ nvidia cards for zec? Would love to know where the advantage is.

bump

jombolo

newbie

Activity: 23

Merit: 0

Quote from: Dhino on March 30, 2018, 07:25:30 AM

Quote from: citronick on March 30, 2018, 06:14:30 AM

Quote from: tytanick on March 30, 2018, 05:48:21 AM

...

Guys, do you have some problems that stats disappear in dashboard ?
Can You guys tell me if this is happening only in claymore or in other miners too ? I mean empty core.memory field in dashboard.

I noticed several times today, in the hash rate col especially but mining doesn't seem to be interrupted.

The rigs are mining RVN so today's cases are not Claymore miners.

It usually comes back to normal after awhile (ie. 10-15 seconds)

same here

Yes, i have had the same issue for about a month. I assume it has something to do with the lag, as the console is usually a few rounds/blocks behind what my attached monitor is reporting. it doesn't really bother me, as you said, it comes back rather quickly...but would be a nice to have a fix

Dhino

jr. member

Activity: 41

Merit: 1

Quote from: citronick on March 30, 2018, 06:14:30 AM

Quote from: tytanick on March 30, 2018, 05:48:21 AM

...

Guys, do you have some problems that stats disappear in dashboard ?
Can You guys tell me if this is happening only in claymore or in other miners too ? I mean empty core.memory field in dashboard.

I noticed several times today, in the hash rate col especially but mining doesn't seem to be interrupted.

The rigs are mining RVN so today's cases are not Claymore miners.

It usually comes back to normal after awhile (ie. 10-15 seconds)

same here

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: tytanick on March 30, 2018, 05:48:21 AM

...

Guys, do you have some problems that stats disappear in dashboard ?
Can You guys tell me if this is happening only in claymore or in other miners too ? I mean empty core.memory field in dashboard.

I noticed several times today, in the hash rate col especially but mining doesn't seem to be interrupted.

The rigs are mining RVN so today's cases are not Claymore miners.

It usually comes back to normal after awhile (ie. 10-15 seconds)

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: AnusXpander on March 30, 2018, 01:33:03 AM

Tytanick, why You don't want to help me?

I want, but please write to [email protected]
We have support team there

Here on bitcointalk we do not do much helping.

So please write email, cryptoscum most probably will help You.
Also you could check if you have all bios options from HELP menu in simplemining.net

Motherboard settings - MUST HAVE:
1) Make sure you are running the latest BIOS! (you can also try older ones if newest isnt working)
2) Set device to boot from USB/pendrive !
3) Disable Sound audio card !
4) Enable 4G encode !
5) Set PCIe support to Auto or GEN2 !
6) Enable onboard graphics to default (PEG - > IDG)
7) Set also: power ON on AC power lost, disable virtualisation
Cool

Plug your monitor into the ONBOARD graphics if you want to take a look on boot process

About xmr-stak 2.3.0 version.
I will implement it after easter holidays. So 3-5 April.
And the hardfork will occur at 6 April so it will be all good

This miner requires some extra library and i do not want to deploy it to all rigs so i need to make some little change first in my scripts.
Anyway curenlty the xmr amd and nvidia miners are up so you can use them also

Guys, do you have some problems that stats disappear in dashboard ?
Can You guys tell me if this is happening only in claymore or in other miners too ? I mean empty core.memory field in dashboard.

AnusXpander

newbie

Activity: 15

Merit: 0

Thanks for answering, I can try but i don't think that's a proper solution since it happens with multiple GPUs in same rig. Usualy clocks are set bad after reboot, next I have to reload miner, clocks are fine but after a while they are starting to lower clock settings.Look at those examples:

ETH - Total Speed: 360.276 Mh/s, Total Shares: 20, Rejected: 0, Time: 00:09
ETH: GPU0 26.656 Mh/s, GPU1 26.666 Mh/s, GPU2 30.689 Mh/s, GPU3 30.672 Mh/s, GPU4 30.594 Mh/s, GPU5 30.826 Mh/s, GPU6 30.629 Mh/s, GPU7 30.442 Mh/s, GPU8 30.745 Mh/s, GPU9 30.802 Mh/s, GPU10 30.754 Mh/s, GPU11 30.802 Mh/s

ETH - Total Speed: 363.554 Mh/s, Total Shares: 1280, Rejected: 0, Time: 09:52
ETH: GPU0 26.617 Mh/s, GPU1 26.635 Mh/s, GPU2 30.792 Mh/s, GPU3 31.130 Mh/s, GPU4 30.638 Mh/s, GPU5 31.160 Mh/s, GPU6 31.118 Mh/s, GPU7 30.946 Mh/s, GPU8 31.180 Mh/s, GPU9 31.155 Mh/s, GPU10 31.000 Mh/s, GPU11 31.184 Mh/s

Sometimes almost all of them are in default setting or lower than I desire.

Quote

If you attached a monitor on GPU0, will that fix the problem?

I have a few older rigs with RX480 Reference, with first 2 GPUs (6xRX480) always acting up.

Solution was to use a dummy HDMI adapter, and problem went away.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: AnusXpander on March 30, 2018, 01:33:03 AM

Tytanick, why You don't want to help me?

Quote from: AnusXpander on March 29, 2018, 06:57:00 AM

Hi, I got about 16 rigs, some of them with 1070 and some with 1070TI, I have huge problems with OC, some of cards have default settings like that:

ETH: GPU0 26.810 Mh/s, GPU1 31.591 Mh/s, GPU2 31.531 Mh/s, GPU3 31.585 Mh/s, GPU4 31.637 Mh/s, GPU5 31.387 Mh/s, GPU6 31.477 Mh/s, GPU7 31.514 Mh/s, GPU8 31.599
Mh/s, GPU9 31.653 Mh/s, GPU10 31.611 Mh/s, GPU11 31.624 Mh/s

what can I do to fix it?

If you attached a monitor on GPU0, will that fix the problem?

I have a few older rigs with RX480 Reference, with first 2 GPUs (6xRX480) always acting up.

Solution was to use a dummy HDMI adapter, and problem went away.

segotiwul

member

Activity: 322

Merit: 10

I say to bitcoin that from today I can launch the most powerful and efficient miners to mine Litecoin. The program in bitcoin is so great that people love it a lot.

AnusXpander

newbie

Activity: 15

Merit: 0

Tytanick, why You don't want to help me?

Quote from: AnusXpander on March 29, 2018, 06:57:00 AM

Hi, I got about 16 rigs, some of them with 1070 and some with 1070TI, I have huge problems with OC, some of cards have default settings like that:

ETH: GPU0 26.810 Mh/s, GPU1 31.591 Mh/s, GPU2 31.531 Mh/s, GPU3 31.585 Mh/s, GPU4 31.637 Mh/s, GPU5 31.387 Mh/s, GPU6 31.477 Mh/s, GPU7 31.514 Mh/s, GPU8 31.599
Mh/s, GPU9 31.653 Mh/s, GPU10 31.611 Mh/s, GPU11 31.624 Mh/s

what can I do to fix it?

https://i.snag.gy/eJXphT.jpg

thepeppi

newbie

Activity: 25

Merit: 0

dont know if i am the only one

got this error somewhere along the way
AMD ADL library not found

anyway seems like you guys are really working on this
love it like it thinking of keep using it
dont know exactly on how to make a payment but i will figure that one out also

mike_san

newbie

Activity: 3

Merit: 0

AMD OpenCL platform not found
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit
Miner ended/crashed. Restarting miner in 10 seconds --------------

Running last Build of Claymore 11.6 and last build of simpleMining 1155

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 179. (Read 836197 times)