Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 4. (Read 836023 times)

Miners update
- rqiner-v0.7.0 (Compatible from EP112. up to 2x it/s. v0.6.1 (CPU) and v.0.6.0 (GPU) will no longer work)

Miners update
- bzminer-v21.2.0 (Updated Dynex for algo change. Updated Dynex auto chip tuning. Fixed instant crashes for many people (Default disable_cpu_metrics to true))
- rigel-v1.17.4 ((XEL) Efficiency improvements (~5%). (XEL) Add --tune parameter to set tuning values manually for consistent hashrate across miner restarts. Bug fixes: (XEL+ZIL) Miner crashes if launched during a ZIL session)
- srbminer-multi-v2.5.6 (Added algorithm 'flex' [Kylacoin] for CPU mining, fee 2.0%. Added algorithm 'randomxeq' [Equilibria] for CPU mining, fee 0.85%)

Miners update
- onezerominer-v1.3.4 (Dynex: Add support for the new enhanced core algorithm. Xelis: Performance Improvement.  This version only supports pool mining. Note: The main target of Xelis optimization is Pascal gpus(p106-100 44 kh/s stock). This is a new implementation and needs it's own OC settings for best efficiency)
- rigel-v1.17.3 ((XEL) Performance / efficiency improvements (~10%). Notes: In this version the miner needs about 2 minutes to tune internal parameters to achieve higher hashrate. It will print a message in the console when the tuning is over. Bug fixes: GPU memory temperatures are not displayed on 555+ drivers)

---

Miners update
- srbminer-multi-v2.5.5 (Added support for dual mining FISHHASH/KARLSENHASH on AMD RDNA/RDNA2/RDNA3. Performance improvement on algorithm 'xelishash' for AMD GPU's and AVX2 CPU's [up to ~13% depending from gpu]. Minor bug fixes)

Miners update
- rqiner-cuda-v0.6.0 (Optimized EP109 CUDA miner)

Miners update
- rigel-v1.17.2 ((XEL) Performance / efficiency improvements (~10%))

Miners update
- rqiner-v0.6.1 (Compatible with Core epoch 109 changes (difficulty increased again and workset size doubled so expect lower it/s and higher memory requirements). Reduced memory to ~150MB/thread. Improved performance by ~20-50%)

Miners update
- qubic.li-client-v1.9.7 (Fixed AVX2 auto detection)
- srbminer-multi-v2.5.4 (Added support for GPU mining algorithm 'xelishash' [Xelis] on AMD GPU's, fee 2.0%. Performance improvement on algorithm 'xelishash' for CPU's. Fixed mining of algorithm 'blake3_decred' broke in previous version. Minor bug fixes)

Miners update
- srbminer-multi-v2.5.3 (Added algorithm 'randomtuske' [Tuske Network] for CPU mining, fee 0.85%. Added algorithm 'xelishash' [Xelis] for CPU mining, fee 0.85%*. Minor performance improvement on 'randomx' based algorithms. DevFee for 'randomscash' algorithm lowered to 0.85%. Fixed mining on AMD BC-250 for algorithms : AUTOLYKOS2, AUTOLYKOS2/BLAKE3_ALEPHIUM/BLAKE3_DECRED, ETHASH/BLAKE3_ALEPHIUM, ETHASHB3/BLAKE3_ALEPHIUM, FISHHASH/BLAKE3_ALEPHIUM. Fixed invalid shares on a few algorithms broke in previous version. Minor bug fixes)

---

Miners update
- rigel-v1.17.1 ((XEL) Add experimental solo mining support (solo+tcp://...). (XEL) Performance / efficiency improvements. Tip: locking GPU memory to 5000mhz doesn't always work well on this version. Some cards perform better with a memory offset instead. Bug fixes: (UI) Miner uptime is not always reported in the log)

Miners update
- onezerominer-v1.3.3 (Add support for Stratum protocol (Vipor proposal). Add --xelis-solo option. Default is Stratum pool mining unless this flag is set or the server port is 8080)
- rigel-v1.17.0 ((XEL) Add xelishash algorithm (dev fee 3%), including +ZIL. Only stratum mode is supported https://github.com/vipor-net/xelis-stratum-protocol. Supported pools as of now: Vipor.net (pre-production pool.vipor.io:5077), K1Pool (port 9351), BaikalMine (port 9030), XelPool (port 9351))
- rqiner-v0.5.2 (Improved performance by ~10-30% from 0.5.0 to 0.5.1 and next 20-30% in 0.5.2)

Miners update
- bzminer-v21.1.5 (New Coin: aidepin. New Coin: aipg. Warthog: Optimized and fixed some stability issues. Warthog: Fixed crashing from previous beta. Warthog: Added CPU metrics. Warthog: Fixed CPUs showing up as GPU. Dynex: Fixed crashes every hour or so. New option: warthog_cache_config default is 0. New option: warthog_max_ram_gb is now a decimal. New option: disable_cpu_metrics set this to true if you experience crashing at startup. x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize. NOTE: Please reset all warthog_verus_hr_target configs)
- teamredminer-v0.10.21 (GPU: Added fishhash support for Vega family, Navi10 and Navi20 (use -a fishhash))

Miners update
- bzminer-v21.1.4b8 (Warthog: Added node RPC support (to connect to node, use http://ipaddress:port). Warthog: Fixed crashing from previous beta. Warthog: Optimized and fixed some stability issues. Warthog: Added CPU metrics (only linux has power and temp currently). Warthog: new option warthog_cache_config default is 0. Warthog: option warthog_max_ram_gb is now a decimal. NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize. NOTE: Please reset all warthog_verus_hr_target configs)
- onezerominer-v1.3.2 (Xelis: Performance improvement. Fix an important bug related to the watchdog. Multiple fixes with +Zil. Drop the default max-memory to 70 (use --max-memory to adjust if you need to). Minor bug fixes)
- rigel-v1.16.3 ((PYI) Minor performance improvements (~1%). (IRON) Reduce the number of stale shares. Detect which GPU crashed the miner more reliably. (UI) Display the number of crashes a GPU caused across miner restarts. Notes: A new Err column will appear in the GPU stats table after the first crash. Only soft crashes are detected - the ones that can be recovered from by the built-in watchdog restarting the miner (make sure the miner is not run with --no-watchdog). (UI) Hide Inv column if --cpu-check is not set Bug fixes: (ERG+GRAM) Performance regression introduced in 1.16.2)

---

Miners update
- xelis-gpu-miner-3DPTheAllFather-v0.9.2 (New miner for GPU Mining)
- xelis-miner-DeroLuna-v0.3 (New miner for CPU Mining)

Miners update
- onezerominer-v1.3.1 (Add support for Xelis(xel) coin(Solo mining with 3% dev fee). Dual mining with Xelis+Zil(refer to the sh/bat files in the packages for sample commands). Multiple nodes support. Add --max-memory(alias to --chips-memory) for controlling the amount of allocated GPU memory)

Miners update
- rqiner-v0.5.0 and rqiner-cuda-v0.5.0 (Compatible with Core epoch 107 changes)

Miners update
- teamblackminer-v2.25 (Fixed meowpow hash. Added support for more meowpow pools. Removed the maintainance mining option. IMPORTANT: This miner version need newest Beta SimpleMining Image based on Ubuntu 22 to work)

Miners update
- qubic.li-client-cpu-v1.9.6 and qubic.li-client-gpu-v1.9.6 (Fixed a bug where trainer couldn't get a task (object reference not set...). Re-Added CPU autodetection for new trainer config scheme (Auto AVX2/AVX512))

---

Miners update
- bzminer-v21.1.3b3 (Warthog: Optimized and fixed some stability issues. Warthog: Added CPU metrics. Warthog: new option warthog_cache_config default is 0. Warthog: option warthog_max_ram_gb is now a decimal. NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize)

Miners update
- lolminer-v1.88 (Significantly improved performance of Gram / Chapa mining on Nvidia Turing and newer gpus. Turing cards gain approximately 15%, Amperes even up to 22%). Note: because the new kernel also uses more energy, the old kernel is still available as an option by adding parameter --mode a. The new kernel can be found via --mode b and is default. Significantly improved performance of dual mining Fishhash + Gram / Chapa mining on Nvidia Turing and newer gpus. Note: because the new kernel also uses more energy, the old kernel is still available as an option by adding parameter --mode a. The new kernel can be found via --mode b and is default. Fixed a hashrate degradation on RDNA3 gpus mining Gram / Chapa introduced in 1.86. Fixed a bug causing dual mining Fishhash and Gram / Chapa not to work on AMD Vega and VII gpus. Note: this still needs manual set --dualfactor)
- rigel-v1.16.1 ((GRAM, CHAPA) Add sha256ton algorithm (dev fee 1%), including ABEL+GRAM, ERG+GRAM, IRON+GRAM, HYP+GRAM, CFX+GRAM, +ZIL. Only icemining.ca and hyperpool.pro pools are supported at this point. --fan-control can now be set to X to let the driver/OS manage the fan. Add --reset-oc parameter to reset all overclock settings and exit. Run as a standalone command rigel --reset-oc or rigel --reset-oc -d 0,1,.... Add --multi-device-arg-mode parameter to allow the miner to proceed even if the number of per-GPU settings doesn't match the number of GPUs - usually happens when one of the GPUs disappears from the system (taken out for maintenance, PCIE connectivity loss etc.) but the miner is run with the same config (see usage in readme). (IRON) Remove --enable-fork support for ironfish algorithm. Use -a fishhash instead. Remove obsolete kawpow (aipg, clore, neoxa, neurai, ravencoin) and ethash (octa, powblocks) algorithm aliases. Use -a kawpow --coin COIN and -a ethash --coin COIN instead)
- teamblackminer-v2.24 (Added support for meowpow with dual/tripple mining modes AMD/NVIDIA)
- tt-miner-v2024.2.0 (New: Algo FishHash. New: Support of AMD GPUs for all algos except GHOSTRIDER. New: auto protocol selection for zkBTC. Fix: EPOCH calculation MeowPow. Fix: Algo-switch EPIC)

---

SimpleMining images update
- SM-i082-6.1.57-4-a22.40.6r6.0.3-rf23.10.3-6.1.10-nv550.76-u22 (Updated Beta image. New NVIDIA driver, updated ROCM libraries to 6.0.3 version)

---

Miners update
- qubic.li-client-gpu-v1.9.5 (Added GPU Cards Feature (select which GPU Cards to use and how many threads or let the client auto tune them). AMD mining requires using newest SimpleMining Beta image that has ROCM libraries in 6.0.3 version)
- rigel-v1.16.2 (GRAM) Add a kernel switch for sha256ton algorithm. --kernel 1 (default) - best when higher power draw is not a concern. --kernel 2 - best when (very) low power draw is preferred. Tip: this version increases hashrate, however it may be less efficient than 1.16.1 with your OC - if that's the case, try reducing the locked core clock slightly, or select --kernel 2. Bug fixes: (GRAM) Job payload parsing error when mining to Hyperpool

---

Miners update
- rqiner-cuda-v0.4.4 (improved performance. improved auto tuning for lower end cards. AMD GPU support yet unavailable with SimpleMining - only NVIDIA)

---

Miners update
- xmrig-v6.21.3 (RandomX: correct memcpy size for JIT initialization)

Miners update
- qubic.li-client-v1.9.4 (optimized trainer handling. added possibility to configure cpu afinity. internal optimizations. Added new options to select your trainer. Minor Bugfixes. Native AMD GPU support - but not yet supported by SimpleMining)

Miners update
- bzminer-v21.1.1 (Ironfish: working again. Warthog: improved verus hashrate. Warthog: showing share difficulty. Warthog: http api providing janus score per device. Other small updates)
- rqiner-cuda-v0.4.1 (implemented 0.4.2 CPU optimizations. This miner requires Beta SimpleMining image based on Ubuntu22 to work)
- rqiner-v0.4.2 (implemented major optimizations improving performance by ~80%. This miner requires Beta SimpleMining image based on Ubuntu22 to work)
- teamredminer-v0.10.20 (updated)

---

Miners update
- lolminer-v1.87 (Fishhash: Significantly improved speed on AMD RX 470 - RX 590 series of gpus (by 30%), significantly improved speed on Nvidia CMP 170HX (by 8-9%). Fishhash: Implemented new DAG build procedure for Nvidia Turing and up gpus, that will build a valid DAG even on higher memory OC. This significantly reduces the number of defect shares in this situation. Pyrin: Improved Pyrin performance on Nvidia Turing and newer gpus by about 2%. Ton / Gram: Improved performance on Nvidia Turing and newer gpus by about 1-2%. Improved performance of Fishhash + Pyrin dual mining on Nvidia Turing and newer gpus by about +10% on the Pyrin side. Improved performance of Fishhash + Alephium dual mining on Nvidia Ampere and newer gpus by about -2% speed on Fishhash side, but +10% on Alephium side with auto tune, about +5% on Alephium side at same Fishhash speed with manual tuning. Added experimental support for Fishash + Gram / Ton dual mining for AMD Vega and VII GPUs. Might require manual setting of dual tuning ratio. The Ton job interface can now connect to pools or bridges using Ton mode 5 with http, so not enforcing https. Removed Blake3-Ironfish from visible algorithms. --algo IRONFISH will now redirect to FISHHASH. Fixed a bug causing the display of defect shares when mining Ton / Gram with very high difficulty. Fixed missing of Ton / Gram mining on AMD Tonga, AMD Fiji and RX 460 (Baffin) series of GPU. Was accidentally removed in a previous release)
- teamblackminer-v2.23 (Added support for evrprogpow with dual/tripple mining modes. Faster kawpow/firopow. Improved the gpu failover code in dual mining mode. Improved the exit on gpu crash code)

Miners update
- rqiner-v0.4.0 with hotfix and  rqiner-cuda-v0.4.0 (Compatible with Core epoch 104 changes. Optimizations for the new mining algo params)

---

Miners update
- rqiner-v0.4.1 (fix issues with stack overflows)

Miners update
- rqiner-cuda-v0.3.22 (Added CUDA version of miner for GPU mining. IMPORTANT: This miner requires Ubuntu22, so you have to reflash your rig with SimpleMining Beta image, that is Ubuntu22 based)
- srbminer-multi-v2.5.2 (Added algorithm 'randomscash' [Satoshi Cash] for CPU mining, fee 1.00% Performance improvement on algorithm 'fishhash' for AMD Rx400/500 GPU's)
- teamredminer-v0.10.19 (GPU: Added support for alephium for all gpus, including dual mining using --alph .. --alph_end)

---

Update v1362
- Fixed NVIDIA temp reading for NVIDIA driver 550.x
- added CUDA 12.4 definition
- Other small improvenments and cleanups