Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 5. (Read 836023 times)

Miners update
- bzminer-v21.0.3 (New Coin: warthog. Added option warthog_cpu_threads - Number of threads to use to compute the verus hashes. Default is 0, use number of cores available. Added option warthog_max_ram_gb - Amount of RAM to use to store sha hashes while cpu threads are calculating verus hashes. Default is 4gb. Value of 0 will use max ram minux 1gb. If not enough avaiable ram, will use available ram minus 1gb. if still not enough ram, will use available ram / 2. Added option warthog_verus_hr_target - Specify the amount of verus hashrate each gpu should provide to the verus workers. If all gpu's have a verus hashrate specified, calibration will be skipped. Hashrates are specified in hashes per second, and are separated by spaces. Default is 0)
- nanominer-v3.9.1 (Fixed wrong reported hashrate ETC on some AMD GPUs)

Miners update
- teamblackminer-v2.22 (Removed rejected shares on epoc change KAWPOW/FIROPOW AMD. Improved autodetect AMD cards code. Option --ap not needed anymore. Reduced rejected shares on FEE thread changes KAWPOW/FIROPOW. Improved the miner code on gpu failure in dual mining mode. The program will now exit)

Miners update
- nanominer-v3.9.0 (Supported IronFish on Nvidia and AMD GPUs: new FishHash algorithm and old IronFish algorithm too. Switch to FishHash should occur automatically when hardfork comes; Added support new AMD GPUs on all algorithms)
- rqiner-v0.3.17 (Improved performance by ~25%. Added -x (--extended-reporting) for per-thread it/s reports. Minor optimizations)
- srbminer-multi-v2.5.0 (Added algorithm 'fishhash' [IronFish] for GPU mining, fee 1.00%. Added support for dual mining FISHHASH/BLAKE3_ALEPHIUM on AMD RDNA/RDNA2/RDNA3, NVIDIA. Added support for dual mining FISHHASH/BLAKE3_DECRED on AMD RDNA/RDNA2/RDNA3, NVIDIA. Added support for dual mining FISHHASH/SHA512_256D_RADIANT on AMD RDNA/RDNA2/RDNA3, NVIDIA. Added support for dual mining FISHHASH/PYRINHASH on AMD RDNA/RDNA2/RDNA3. Added support for mining 'yescrypt' algorithms on AMD gfx1100 GPU's (RDNA3). Auto setup (threads/affinity) for 'yespower' and 'yescrypt' algorithms on CPU should now work better. Removed support for AMD RX550/560 GPU's. Removed algorithm 'blake3_ironfish'. Removed algorithm 'xdag'. Removed parameter 'gpu-progpow-preload'. Minor bug fixes)

---

Miners update
- lolminer-v1.86 (Added support for FishHash including dual mining codes. Use -a FISHHASH to mine it. Fork for Ironfish will be April 2nd, 2024. Significantly increased Ton / Gram mining performance on all supported AMD GPUs. Removed old Fishhash testing codes. lolMiner will now accept --algo to be put in multiple times. The last occurrence will be the selected algorithm. Fixed a bug causing high amount of pool rejected shares with AMD cards and Gram mining)

---

Miners update
- rqiner-v0.3.18 (optimized for vectorization - only arches that support AVX2 and BMI2 will benefit from this optimization)
- srbminer-multi-v2.5.1 (Added support for AMD BC-250 Mining GPU's. DevFee for 'fishhash' algorithm lowered to 0.85%)

SimpleMining images update
- SM-i072-6.1.57-3-a22.40.6-rf23.10.3-6.1.10-nv535.154.05-u20 (Updated latest stable image with small fix with very rare issue causing problems with partitions after power failure)
- SM-i081-6.1.57-4-a22.40.6-rf23.10.3-6.1.10-nv550.67-u22 (Updated latest beta image with small fix with very rare issue causing problems with partitions after power failure)

---

Miners update
- rqiner-v0.3.15 (Compatible with core epoch 102 changes)
- tt-miner-v2024.1.8 (Fixes a bug in Kawpow that causes 'Invalid Shares' in certain, rare conditions. Improved DAG management for mining ETHASH or KAWPOW on a coin-switching pool like NiceHash and Zergpool. Allows faster DAG switching if the pool changes the destination coin. Checked Alephium/BLAKE3 mining on NiceHash. Improved Hahsrate for ETHASH & ETHASHB3)

Miners update
- lolminer-v1.85-beta (Significantly improved Gram hashrate on AMD RX 5000 and higher cards by almost 10%. Added support for mining the Fishhash mainnet. New parameter -a FISHHASH. This will automatically use the new Ironfish stratum format that is mandatory after the fork. Supported GPUs: Nvidia GTX 1000 series and newer, AMD RX 5000 series and new. Supported dual mining options with Alephium (ALEPHDUAL), Gram (TONDUAL) and Radiant (RXDDUAL). Removed old Fishhash testing codes. Fixed a bug causing high amount of pool rejected shares with AMD cards and Gram mining)
- rqiner-v0.3.14 (reduced memory requirement to ~10MB/thread. boosted performance ~30-50%)
- xmrig-v6.21.2 (Support for old Ubuntu releases has been dropped. Fixed donation with GhostRider algorithm for builds without KawPow algorithm. Fixed, the file log writer was not thread-safe. Fixed RandomX crash when compiled with fortify_source)

---

SimpleMining images update
- SM-i080d-6.1.57-4-a22.40.6-rf23.20.2-6.2.10-nv550.67-u22 (New beta image with newest NVIDIA drivers supoeted newest GPUs. WARNING: this and latest previous beta images hmay have problem with AMD support. Please us them only for NVIDIA for now. This iusse should be fixed in near days)

---

SimpleMining images update
- SM-i080e-6.1.57-4-a22.40.6-rf23.10.3-6.1.10-nv550.67-u22 (New Beta image. Fixed AMD support problem with two previous beta images)

---

Miners update
- rigel-v1.15.1 ((IRON) Add ironfish -> fishhash auto-switch, see this guide on how to set it up. (RVN) Report hashrate to mining pools)

Miners update
- tt-miner-v2024.1.7 (removed algo switch code from MeowPow algo. faster progpow code generation. fixes some miner issues and typos)

SM-Beacon-v2.0
- New Bacon image. New version supports also config.txt with optional email address (same as in common config.txt file) for automatic rig activation when new rig is run with default image and inserted such beacon drive into USB slot. More info in our FAQ section. There is also link for download new Beacon image.
  Please remember that Beacon is not a complete image for booting, but only additional image for better and simpler rig service support

---

Miners update
- rqiner-v0.3.13 (Optimized EP101 version)

---

Miners update
- qubic.li-client-v1.8.10 (fixed cases when the client crashed unexpected)

Miners update
- rqiner-v0.3.11 (Improved cache usage boosts performance by ~20%. Fix crashes on index out of bounds)
- srbminer-multi-v2.4.9 (Added support for GPU mining algorithm 'meowpow' [Meow coin]. Fixed possible invalid shares on PROGPOW algorithms [AMD Ellesmere GPU's]. TLS/SSL pool connections now supported over socks5 proxy (--proxy parameter))
- teamblackminer-v2.21 (Fixed rejected shares on startup Kawpow/Firopow. Fixed zil switch crash bug on multicard rigs. Fixed crash in the zil powerlimit setting)
- tt-miner-v2024.1.5 (support for CUDA 12.4. improved hashrate for GHOSTRIDER. add support for MEOWPOW (switch from KAWPOW to MEOWPOW on March 18th, 2024 - 22:00:00). add support for the MEOWPOW EPOCH switch at epoch 110 to grow the DAG size to 4GB)
- qubic.li-client-v1.8.9 (Since this version miner uses raw source qubic.li-client binaries instead of Eloword binaries, that was used in all previous versions)

---

Miners update
- rqiner-v0.3.12 (Fixed slicing crash)

---

Miners update
- tt-miner-v2024.1.6 (improved hashrate for ProgPow and KawPow algos - mostly on 10XX GPUs (not all types verified). improved hashrate for Ghostrider. new coin added: zkBTC)

Miners update
- rqiner-v0.3.9 (Performance optimization up to ~10%)

Miners update
- miniz-v2.3c (Added support for PyrinHash algo – Pyrin (PYI), for NVIDIA. Fee: 0.8%. Added support for KarlsenHash algo – Karlsen (KLS), Nexell-ia for NVIDIA. Fee: 0.8%. Added support for dual mining with PyrinHash/KarlsenHash (X + PYI/KLS/NXL), for NVIDIA. Added support for triple mining with PyrinHash/KarlsenHash + Zilliqa (X + PYI/KLS/NXL + ZIL), for NVIDIA. Added --no-ocx option: miniZ will not run ocx at the begging (previous default). Added --powerf option: applies a fraction of the nominal power to all gpus. (requires sudo/administrator privileges). Added various options for dual mining: --url2, --dualw, --dualw-all, --dual-mode, --dualmode-all. Added --profit/--accprofit options to shows a rough estimate of daily/session profits on the console. Improved automatic algo detection. Removed support for obsolete Kepler GPUS in most algos. (Still possible with Ethash, ProgPoW, and Equihash 210,9). Improved ocx functionality. On start, miniZ will take a few seconds to perform ocx. Major improvement for ETH/progpow invalid/stale shares. Various minor/major fixes)
- rigel-v1.15.0 ((IRON) Add fishhash algorithm support (dev fee 1%) including. IRON+ALPH, IRON+KLS, IRON+PYI, IRON+RXD, +ZIL. Add SOCKS5 proxy support. Add --no-colour parameter to disable colours in the miner log. Allow opting out of memory clock reset when building DAG by passing --dag-reset-mclock off. Bug fixes: (ALPH) Password field value -p is not passed to the pool making it impossible to use static difficulty when mining to Vipor)
- rqiner-v0.3.8 (~25% performance optimization)

Miners update
- qubic.li-client (Log time set to UTC. Added graceful handling of runner. Update to .net 8. Optimized logging of found solutions during epoch. added ability to resend unsubmitted solution after a client restart)

---

Miners update
- rqiner-v0.3.7 (Fixed a memory related bug reducing memory usage by about 8x)
- srbminer-multi-v2.4.8 (Added support for GPU mining algorithm 'aurum' on AMD/NVIDIA/INTEL GPU's. Added support for algorithm 'heavyhash' on AMD VEGA GPU's. Performance improvement on PROGPOW algorithms on AMD/NVIDIA GPU's. Performance improvement on algorithm 'aurum' for CPU's. Returned support for mining algorithm 'cryptonight_ccx' on CPU and AMD GPU's [UltraNote Infinity coin]. Setting any cclock or mclock OC parameter's value to 0 will now reset the value of core clock / memory clock to the default value. Fixed broken DUAL AUTOLYKOS2/BLAKE3_ALEPHIUM on some AMD RDNA2 GPUs. Fixed a bug with 'autolykos2' that could cause bad dataset creation (invalid shares). Fixed a bug with nonce distribution for algorithm 'randomepic' on EpicMine pool. Removed parameters and functionality for : '--gpu-buffer-mode', '--gpu-disable-auto-buffer', '--max-difficulty', '--start-block-height', '--gpu-autolykos2-preload', '--multi-algorithm-job-mode', '--gpu-auto-tune', '--gpu-ethash-mode')

Miners update
- rqiner-v0.3.6 (~2-5% better performance compared to v0.3.5)

Miners update
- gminer-v3.44 (added Dero and Dero + ZIL mining support on K1Pool (Nvidia only))
- rqiner-v0.3.3 (Bug fix)

---

Update v1360
- Added rqminer API CONSOLE stats.
- Improved miner API stats system. Now API stats updates will be released much faster than common updates.
- Improved AMD GPU model names stats readings.
- Fixed init message error when no IP received from DHCP.
- Fixed console GPU and CPU mismatch on older images based on Ubuntu16 (needed once reload miner to fully activate fix).
- Added possibility to mine on CPU without any GPU attached in rig.

---

Miners update
- rqiner-v0.3.5 (major optimizations that should improve performance by ~50%)

Miners update
- rqiner-v0.3.2 (Implement the lates bug fix for the EP99 algo)

Miners update
- xmrig-v6.21.1 (Added support for townforge (monero fork using randomx). Fixed Zephyr mining. Fixed segfault in HTTP API rebind. Removed deprecated AstroBWTv1 and v2. Added CUDA 12 support)

---

Miners update
- teamblackminer-v2.20 (Pool timeouts will exit the miner instead of restarting stratum threads. Removed rejects on epoch increase Kawpow/Firopow. Removed low difficulty rejects Kawpow/Firopow. Gpu crash will restart the miner. Improved the Zil mining switch code)

Miners update
- teamblackminer-v2.19 (Fixed dag creation error with the --zilonly flag. Fixed crash bug in kawpow/firopow. Improved zil switch. Fixed rejected zil shared on k1pool.com. Reduced rejected shares Kawpow/Firopow)

SimpleMining images update
- SM-i071k-6.1.57-3-a22.40.6-rf23.10.3-6.1.10-nv535.154.05-u20 (New Beta image. Fixed AMD driver for BC-250 support with issues in previous beta image)
- Please remember upgrade first just one or just few rigs, not the all at once. If all is ok, then the next part of rigs.

Miners update
- bzminer-v20.0.0 (Decred: Added pool support. New coin: nexellia. New coin: dint (DinarTether). New coin: Larissa)
- teamblackminer-v2.18 (Improved threads exit. Improved multithread code. Fixed bug in the miningtime option)
- tt-miner-v2024.1.3 (some users reported a bug in KawPow algos. Bug is fixed with this update. EPIC didn't gets active on some systems in certain configurations. fix: creating 6GB DAG for ZIL if coin in not active. added Vultaic(VLC), Kiiro Coin(KIIRO) & NiRmata(NIR), fix for AMD interfaces)

Miners update
- lolminer-v1.84 (Improved Ton / Gram mining performance by 15-18% on AMD RDNA 1-3 and NVIDIA Pascal and newer GPUs. Added EthashB3 + Ton dual mining via --dualmode TONDUAL. Added support to mine Gram on gramcoin.org - the https endpoint https://api-pool.gramcoin.org will be detected automatically, but the mode also can be selected manually by using --ton-mode 5. Fixed a bug causing Ton / Gram mining not to work on Cuda 11 drivers. Fixed a bug causing Ton / Gram mining to not work on newer AMD drivers)

---

Miners update
- tt-miner-v2024.1.1 (fix: memory leak, could led to slower hashrates and crashes after some days. smaller memory footprint. stratum protocol for ETI. much better performance for Ghostrider and Blake3 on 10XX (Pascal GPUs). better performance for almost all other algos. allows to mine different coins/algos on each GPU. better performance and support for AMD (does not work for algos that requires a DAG and Ghostrider ). better performance for intel iGPU and Intel CPU (does not work for algos that requires a DAG and Ghostrider ))

Miners update
- lolminer-v1.83 (Due to popular demand added back codes for mining TON / GRAM. Use -a TON or -a GRAM to mine it. Added Ton support for Nvidia ADA and AMD RDNA3 generation of GPUs. Nvidia Drivers required are 525 or higher)

---

Miners update
- teamredminer-v0.10.18 (Added TON/GRAM for RDNA3 gpus. Fixed TON/GRAM dual mining with abel and autolykos2. Fixed broken kawpow on RDNA3 gpus. Fixed loading Radeon VII kernels in general on newer drivers. Fixed broken abel+ironfish dual mining. Fixed old bug for ironfish mining on pools like Kryptex using email as wallet/username. Fixed broken power read for some gpus on newer drivers. Fixed broken kawpow mining on vultaic. Patched broken job messages for new TON/GRAM pools. Added --debug logging of network traffic for out-of-band stats for ABEL pools)