[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 489.

usmarine2141

newbie

Activity: 18

Merit: 0

Quote from: usmarine2141 on April 16, 2017, 01:29:03 PM

Continuously have issues with the RX version daily, it will just error out, and go in a loop for about 10 minutes, until i go out there and move USB stick around to diff ports, reset about 10 times. It is very frustrating.

I am using BIOSTAR Board https://www.newegg.com/Product/Product.aspx?Item=N82E16813138436

Intel Pentium CPU https://www.newegg.com/Product/Product.aspx?Item=9SIA85V4SC8071

Crucial 4gb stick of ddr3 RAM

750W PSU powering the board

http://imgur.com/a/77yH0

Any help would be greatly appreciated.

claymore is def faster.

So it is an issue with using claymore miner. it is mining without any issues using optiminer miner for zcash...

Please address issue with claymore miner on zcash.

davigotardo

newbie

Activity: 14

Merit: 0

Quote from: mfsmarques on April 16, 2017, 08:22:08 PM

Quote from: davigotardo on April 16, 2017, 08:08:40 PM

Quote from: mfsmarques on April 16, 2017, 03:59:51 PM

Quote from: davigotardo on April 16, 2017, 03:26:11 PM

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

I do not think this can be done by the page.

In the case in the pool all the rigs stayed as one?
Is there no way to make them appear separate?

mfsmarques

member

Activity: 65

Merit: 10

Quote from: davigotardo on April 16, 2017, 08:08:40 PM

Quote from: mfsmarques on April 16, 2017, 03:59:51 PM

Quote from: davigotardo on April 16, 2017, 03:26:11 PM

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

I do not think this can be done by the page.

davigotardo

newbie

Activity: 14

Merit: 0

Quote from: mfsmarques on April 16, 2017, 03:59:51 PM

Quote from: davigotardo on April 16, 2017, 03:26:11 PM

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

I got it, friend, thank you.
Now I want to know how to put a configuration of each individual rig, as well as see separate pool results

mfsmarques

member

Activity: 65

Merit: 10

Quote from: Talat10gu on April 16, 2017, 05:31:57 PM

Quote from: mfsmarques on April 16, 2017, 03:00:09 PM

For anyone who is using the motherboard MSI Z170A Gamining 5 and is experiencing instability issues and SMOS keeps restarting, here is how to resolve:

- Use Bios Version 1.C;

- Into BIOS
Settings>Advanced>PCI subsystem Setting
PEG 0 and PEG 1 set to Gen2
Above 4G Decoding set to Enabled

- Settings>Windows OS Configuration
Windows 8.1 / 10 = "Disabled"
Windows 7 = "Disabled"
MSI Fast Boot = "Disabled"
Fast Boot = "Disabled"

i tried your settings with MSI z170a Gaming M5
i just cant start the OS if i put 4+ GPUs
it works well with 4 gpus but couldnt boot if i put 5th GPU.
PS: I have the latest BIOS
Anyone has a solution?

With the last version not boot, I only managed with 1.C

usmarine2141

newbie

Activity: 18

Merit: 0

Quote from: naeme18720 on April 16, 2017, 01:44:28 PM

Quote from: usmarine2141 on April 16, 2017, 01:29:03 PM

Continuously have issues with the RX version daily, it will just error out, and go in a loop for about 10 minutes, until i go out there and move USB stick around to diff ports, reset about 10 times. It is very frustrating.

I am using BIOSTAR Board https://www.newegg.com/Product/Product.aspx?Item=N82E16813138436

Intel Pentium CPU https://www.newegg.com/Product/Product.aspx?Item=9SIA85V4SC8071

Crucial 4gb stick of ddr3 RAM

750W PSU powering the board

http://imgur.com/a/77yH0

Any help would be greatly appreciated.

750 watts is enough??? Each gpu how watts??? Shocked

should of added, i have a server PSU powering the GPUS, the 750 only powers the board, and 1 other card not on this rig.

Talat10gu

member

Activity: 279

Merit: 10

Quote from: mfsmarques on April 16, 2017, 03:00:09 PM

For anyone who is using the motherboard MSI Z170A Gamining 5 and is experiencing instability issues and SMOS keeps restarting, here is how to resolve:

- Use Bios Version 1.C;

- Into BIOS
Settings>Advanced>PCI subsystem Setting
PEG 0 and PEG 1 set to Gen2
Above 4G Decoding set to Enabled

- Settings>Windows OS Configuration
Windows 8.1 / 10 = "Disabled"
Windows 7 = "Disabled"
MSI Fast Boot = "Disabled"
Fast Boot = "Disabled"

i tried your settings with MSI z170a Gaming M5
i just cant start the OS if i put 4+ GPUs
it works well with 4 gpus but couldnt boot if i put 5th GPU.
PS: I have the latest BIOS
Anyone has a solution?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

I am testing RX480 with sgminer-gm v5.5.5-8 Nicehash for ETH

Anyone has a working sample?

mfsmarques

member

Activity: 65

Merit: 10

Quote from: davigotardo on April 16, 2017, 03:26:11 PM

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool dcr.suprnova.cc:2252 -dwal user.$rigName -dpsw x -allpools 1 -mport -3333

davigotardo

newbie

Activity: 14

Merit: 0

I am not able to configure claymore with dual eth + decred pool dwarf and suprnova

mfsmarques

member

Activity: 65

Merit: 10

For anyone who is using the motherboard MSI Z170A Gamining 5 and is experiencing instability issues and SMOS keeps restarting, here is how to resolve:

- Use Bios Version 1.C;

- Into BIOS
Settings>Advanced>PCI subsystem Setting
PEG 0 and PEG 1 set to Gen2
Above 4G Decoding set to Enabled

- Settings>Windows OS Configuration
Windows 8.1 / 10 = "Disabled"
Windows 7 = "Disabled"
MSI Fast Boot = "Disabled"
Fast Boot = "Disabled"

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: usmarine2141 on April 16, 2017, 01:29:03 PM

Continuously have issues with the RX version daily, it will just error out, and go in a loop for about 10 minutes, until i go out there and move USB stick around to diff ports, reset about 10 times. It is very frustrating.

I am using BIOSTAR Board https://www.newegg.com/Product/Product.aspx?Item=N82E16813138436

Intel Pentium CPU https://www.newegg.com/Product/Product.aspx?Item=9SIA85V4SC8071

Crucial 4gb stick of ddr3 RAM

750W PSU powering the board

http://imgur.com/a/77yH0

Any help would be greatly appreciated.

750 watts is enough??? Each gpu how watts??? Shocked

usmarine2141

newbie

Activity: 18

Merit: 0

Continuously have issues with the RX version daily, it will just error out, and go in a loop for about 10 minutes, until i go out there and move USB stick around to diff ports, reset about 10 times. It is very frustrating.

I am using BIOSTAR Board https://www.newegg.com/Product/Product.aspx?Item=N82E16813138436

Intel Pentium CPU https://www.newegg.com/Product/Product.aspx?Item=9SIA85V4SC8071

Crucial 4gb stick of ddr3 RAM

750W PSU powering the board

http://imgur.com/a/77yH0

Any help would be greatly appreciated.

realter

newbie

Activity: 49

Merit: 0

Quote from: naeme18720 on April 16, 2017, 07:56:21 AM

Please see this hashrate

https://ethermine.org/miners/98364f098e2cd698e93c84bc25c4e37425dee027

What i doing??? :-(:-(

Please share sitting for mining in suprnova???

https://bitcointalksearch.org/topic/m.18560459

naeme18720

sr. member

Activity: 290

Merit: 250

I do upgrade kernel or Amd or no???

I can upgrade???

naeme18720

sr. member

Activity: 290

Merit: 250

Please see this hashrate

https://ethermine.org/miners/98364f098e2cd698e93c84bc25c4e37425dee027

What i doing??? :-(:-(

Please share sitting for mining in suprnova???

realter

newbie

Activity: 49

Merit: 0

Quote from: Ther0byte on April 16, 2017, 06:17:35 AM

Hi there,

i was wondering if it's possible to set each miner on a different setting. I.E. If i want a rig to mine ZEC and another one to mine ETH.

Thanks in advance.

+1
Like group of setting
And set rig to group

Ther0byte

newbie

Activity: 5

Merit: 0

Hi there,

i was wondering if it's possible to set each miner on a different setting. I.E. If i want a rig to mine ZEC and another one to mine ETH.

Thanks in advance.

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: philipma1957 on April 15, 2017, 01:15:19 PM

Quote from: naeme18720 on April 15, 2017, 12:43:54 PM

Quote from: philipma1957 on April 15, 2017, 12:26:03 PM

Quote from: naeme18720 on April 15, 2017, 11:05:08 AM

Hi guys

Please help to me for sitting my 2 rig

-wd 1 -r 1 -epool eu2.ethermine.org:4444 -ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.salam1 -esm 0 -epsw x -allpools 1 -mport -3333

But not working

My first rig 3 rx470
My Two rig 3 rx470

Why in https://ethermine.org/miners/98364f098e2cd698e93c84bc25c4e37425dee027
Just 1 rig worked??

Name my rig in samplemining is sal1 and sal2

It works fine. Look at the hash rate it is 80 reported. But 143 current

143 is about 24 a card

It does this it combines your rig totals

This my hashrate 80 but 164 m/h i mined
So this hashrate not fixed... Not problem this true???

see 3 numbers

80.9/153/ 85.0

the 80.9 = wrong
the 153 = current real number of all your rigs as smOS combines them into 1 number
the 85.0 = 24 hour average it will grow close to the 153

so always look at the second and third numbers and ignore the first.

Thanks i understand.. Thanks very much

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: cryptogastein on April 15, 2017, 02:01:56 PM

Quote from: naeme18720 on April 15, 2017, 11:05:08 AM

Hi guys

Please help to me for sitting my 2 rig

-wd 1 -r 1 -epool eu2.ethermine.org:4444 -ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.salam1 -esm 0 -epsw x -allpools 1 -mport -3333

But not working

My first rig 3 rx470
My Two rig 3 rx470

Why in https://ethermine.org/miners/98364f098e2cd698e93c84bc25c4e37425dee027
Just 1 rig worked??

Name my rig in samplemining is sal1 and sal2

change

-ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.salam1

to

-ewal 0x98364f098e2cd698e93c84bc25c4e37425dee027.$rigName

Thanks but not working

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 489. (Read 836406 times)