[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 574.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: mitak64 on November 13, 2016, 09:19:39 AM

What voltage for RX series if you have any ?

I am setting Voltage Offset to -125mv.
I am doing custom roms for any gpu but its paid service.

mitak64

full member

Activity: 254

Merit: 100

What voltage for RX series if you have any ?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: mitak64 on November 13, 2016, 09:16:13 AM

Thanks for your great work !

undervolt by editing bios ?

Yes. There is no other way in linux.

mitak64

full member

Activity: 254

Merit: 100

Thanks for your great work !

undervolt by editing bios ?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: mitak64 on November 13, 2016, 09:12:23 AM

much better
cards stay below 75

The spinning up was too slow.
Anyway i will improve this script so it do burst 100% fan speed when temp is >85 C
Ok. Thx for quick report.
I have undervolted gpus so my temps are much lower.

mitak64

full member

Activity: 254

Merit: 100

much better
cards stay below 75

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: mitak64 on November 13, 2016, 09:01:54 AM

Please revert this change asap.
My 480 goes above 85C Shocked

I made V1027 update, wait until it updates (max 5 min)

I made bigger steps.
Tell me is is better now ?

Lepra

newbie

Activity: 48

Merit: 0

Quote from: tytanick on November 13, 2016, 08:49:44 AM

RX oesnt support 200 series.

UPDATE V1026
- RX OS auto fan controll set to 76 C.
Tomorrow i will try to release option in dashboard so you could set your own target temperature.
I will also try tomorrow make R OS auto fan controll.

Thanks a lot mate.

mitak64

full member

Activity: 254

Merit: 100

Please revert this change asap !
My 480 and 470 go above 85C Shocked

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

it will update itself

teklord310

newbie

Activity: 4

Merit: 0

Simple questino.. i see the latest version available but dont see where to download it.. this is the link on the site: https://simplemining.net/download/simpleminer-RX-v1019.imgc but points to v1019. I see there is v1023 avail. where is it?

olcaytu2005

legendary

Activity: 1470

Merit: 1024

I had to stop, cards reached 80 degrees and the fans didn't started. rx 470 4 gb.

Previous update was better. Undecided

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: olcaytu2005 on November 13, 2016, 08:52:21 AM

Quote from: tytanick on November 13, 2016, 08:49:44 AM

RX oesnt support 200 series.

UPDATE V1026
- RX OS auto fan controll set to 76 C.
Tomorrow i will try to release option in dashboard so you could set your own target temperature.
I will also try tomorrow make R OS auto fan controll.

Getting there is no screen to be attached matching miner error. Had this before but the miner started never the less. What could it be?

send me PM with your email and rig number

olcaytu2005

legendary

Activity: 1470

Merit: 1024

Quote from: tytanick on November 13, 2016, 08:49:44 AM

RX oesnt support 200 series.

UPDATE V1026
- RX OS auto fan controll set to 76 C.
Tomorrow i will try to release option in dashboard so you could set your own target temperature.
I will also try tomorrow make R OS auto fan controll.

Getting there is "no screen to be attached matching miner" error. Had this before but the miner started never the less. What could it be?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

RX oesnt support 200 series.

UPDATE V1026
- RX OS auto fan controll set to 76 C.
Tomorrow i will try to release option in dashboard so you could set your own target temperature.
I will also try tomorrow make R OS auto fan controll.

tuiiit

newbie

Activity: 10

Merit: 0

Zcash optimer work, i dont have desktop but it work

I have question, is it possible to have old radeon and new rx470/480 on the same ring ? At this time i see only radeon rx but not 280.

turdor

newbie

Activity: 13

Merit: 0

Hi tytanic!

first of all thanx for amazing OS and all the effort!

Now I will NOT be original LOL:
HOW TO CHANGE FANSPEED manually in a headless multi adapter setup PLEASE?
As my cards are burning with optiminer where is no chance to control fanspeed like in claymore!!! Seems like I lost couple of cards last night - I don´t blame you, I do understand what I left its with poor "auto" configuration, just please give us instructions how to control fans i your OS.

aticonfig --pplib-cmd "set fanspeed 0 xx" do work only for 1st (0) adapter, DISPALY=0.1 also do not work.

is there a script on sturtup I can edit or smthing besidfes manually updating? May be you can just give us a script to run manually when needed till you implement fan control in OS?

I have R OS and 7950/r9 290 cards

anything! Huh

Please help! I do not want to loose all my cards...

best Wink

newmz

sr. member

Activity: 372

Merit: 250

The road of excess leads to the palace of wisdom

Hello - I had big hopes for this because it was the easiest way I could find to use the new Optiminer.

I have been using Ethos with the Silent Army v5 and it's been good but Optiminer is supposed to be better right?

I have R9 290s, 290Xs and 380s.

I tried your Simpleminer, got it to boot, got into the web management OK and tried to set up for Optiminer.

In the "mining console" on the rig's screen I see this message:

/root/xminer.sh: line 24 /root/miner/optiminer-zcash/optiminer-zcash: Permission Denied

I don't understand that, do I need to chmod +x something? Why permission denied?

I was able to get Claymore Eth miner to work but I would really prefer to be able to specify which pool I use since I don't really like Dwarfpool.

I would really love to see Optiminer working and what hash I can achieve with it. How can I fix this?

I would be willing to make a small BTC donation if you can help me make this work.

tuiiit

newbie

Activity: 10

Merit: 0

Quote from: tytanick on November 13, 2016, 05:36:02 AM

Try changing USB options in motherboard BIOS.
I could uplaod new image but later today/tomorrow.
I think it is bios option becasue most people dont have this problem.

Here is a description of what is exactly happening :

http://paulphilippov.com/articles/how-to-fix-device-not-accepting-address-error

I found that comment intersting :

This doesn't work for me, but I'll leave here the solution that I fund in:
"unix.stackexchange.com/questions/72625/why-is-usb-not-working-in-linux-when-it-works-in-uefi-bios"
I hope that this would help someone.
"It seems with newer Gigabyte mainboards (at least) there is a BIOS option called IOMMU Controller that is disabled by default and gives no clue or indication as to what it is for.
Enabling this setting and rebooting "magically" restores all my USB and networking problems in a 64-bit Linux OS (doesn't matter which one)."
If this also doesn't work, yu can try adding "iommu=soft" to the kernel command line.

I will try this tip and if not work waiting your uploads . Thanks

olcaytu2005

legendary

Activity: 1470

Merit: 1024

Quote from: tytanick on November 13, 2016, 05:36:02 AM

Try changing USB options in motherboard BIOS.
I could uplaod new image but later today/tomorrow.
I think it is bios option becasue most people dont have this problem.

Bro what sols are you getting with stock memory in rx 470? I could downclock it if the error will go, but I want to know how much sols I will be losing.

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 574. (Read 836048 times)