Optiminer overheating problem workaround:
While Tytanick almost done with R1031 I found a workaround - you can run claymore custom (dualminer), and after you change back to optiminer rigs will keep low temp BUT only till hard reboot.
I tested it with dwarf EXP params if it's important.
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 570. (Read 835405 times)
November 14, 2016, 02:10:36 PM
November 14, 2016, 02:01:41 PM
guys i need few beta testers 
I think that i will try to make "BETA UPDATE" button in future but now i need manual testers:
As now i have UPDATE v1031 pending.
When few users will test it then i will upload to all users.
Changelog:
- fan script for R OS (for the first time)
- fan script for RX OS (little change)
- ability to set target temperature 30-80 C
- ability to set minimum fan speed 20-100%
- optiminer bin fix and miner loop that will run miner again if it will end working.
What to do:
Apply update, and test how fan speed works (you can change those parameters in rig settings)
If you know how to login via ssh to your rig and you want to test newest update then here is how:
#You need to run "bash <(curl -s https://simplemining.net/update/1031/update.sh.prep)" as root, so:
Passwrod for user miner is: miner
I think that i will try to make "BETA UPDATE" button in future but now i need manual testers:
As now i have UPDATE v1031 pending.
When few users will test it then i will upload to all users.
Changelog:
- fan script for R OS (for the first time)
- fan script for RX OS (little change)
- ability to set target temperature 30-80 C
- ability to set minimum fan speed 20-100%
- optiminer bin fix and miner loop that will run miner again if it will end working.
What to do:
Apply update, and test how fan speed works (you can change those parameters in rig settings)
If you know how to login via ssh to your rig and you want to test newest update then here is how:
#You need to run "bash <(curl -s https://simplemining.net/update/1031/update.sh.prep)" as root, so:
Passwrod for user miner is: miner
Code:
ssh miner@IP_ADDRESS
sudo su
bash <(curl -s https://simplemining.net/update/1031/update.sh.prep)
November 14, 2016, 12:35:10 PM
Great job!
Finished 48 hours test on zcash whit no down time.
My pro and con
PRO
Fast install on usb;
Web acces and config;
Easy to config;
All miners for profitabile coins are already there and up to date.
CON
Fan speed control on zcash ( in future version i am sure it will be );
3 minutes boot ( 4$ 16G usb drive - probably that is why it takes that much).
Some results then:
optiminer zcash
all stock bios and settings
r9 290 ~ 120 h/s
r9 380x ~ 80 h/s
my test rig
2x 290 + 2x 380x ~ 410 h/s
keep up the great work.
For the users : dont forget do donate if we want the project to evolve.
Finished 48 hours test on zcash whit no down time.
My pro and con
PRO
Fast install on usb;
Web acces and config;
Easy to config;
All miners for profitabile coins are already there and up to date.
CON
Fan speed control on zcash ( in future version i am sure it will be );
3 minutes boot ( 4$ 16G usb drive - probably that is why it takes that much).
Some results then:
optiminer zcash
all stock bios and settings
r9 290 ~ 120 h/s
r9 380x ~ 80 h/s
my test rig
2x 290 + 2x 380x ~ 410 h/s
keep up the great work.
For the users : dont forget do donate if we want the project to evolve.
November 14, 2016, 11:01:37 AM
Only hard reset helps (in my case) against WARN [stratum] Got work but have no extranonce!
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
There is a known issue with the miner not properly supporting extranonce protocol. Will be corrected next update.
November 14, 2016, 10:38:21 AM
Only hard reset helps (in my case) against WARN [stratum] Got work but have no extranonce!
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
November 14, 2016, 10:28:57 AM
One idea.
if u made a script to set fan target temp in website u can create one for monitoring temp too?
ex:For people who have many rigs for easy monitoring.
target temp 85° or above red indicator.
target temp 85° or below green indicator.
if u made a script to set fan target temp in website u can create one for monitoring temp too?
ex:For people who have many rigs for easy monitoring.
target temp 85° or above red indicator.
target temp 85° or below green indicator.
Yes in some time i will do it - dont know when
November 14, 2016, 09:23:48 AM
I am download again the miner from source.
Del miner dir and Mv New miner to /root/miner and restart. Work fine.
My error is in X_round0.bin
@tytanick
I update v1019 to lastest and get error above. File round0 bin in OptiminerZcash file is missed
Please wait for v1031 - when i release it - you can check again
November 14, 2016, 08:36:37 AM
Next update should solve this and also read error of round.bin in optiminer.
Sometimes update doenst overwrite files, i dont know why..
Need few more hours, implementing fan controll
November 14, 2016, 08:24:01 AM
November 14, 2016, 08:21:49 AM
oh i see... Yep web miner console works fine. I wanted to wach it on putty, but ok.
November 14, 2016, 08:03:41 AM
hmmm so something is not right, "screen -x miner" doesn't show any miner (Optiminer-zcash CUSTOM), same in web pannel, there is empty field on "mining speed" , maybe optiminer-zcash isn't properly configure ... however in process list optiminer show his data "22666 pts/9 Sl+ 201:11 /root/miner/optiminer-zcash/optiminer-zcash -s ................ -u ................ -p x " .
In mining speed field you can only see speeds when you are using Claymore.
Rest miners are unsupported becasue they dont have API.
Only console.
lok here: - > https://tytanick-gmail.tinytake.com/sf/MTExNzg4MF80NDI0NjYx
If still its a problem please send me rig number and your email to [email protected]
November 14, 2016, 07:37:58 AM
hmmm so something is not right, "screen -x miner" doesn't show any miner (Optiminer-zcash CUSTOM), same in web pannel, there is empty field on "mining speed" , maybe optiminer-zcash isn't properly configure ... however in process list optiminer show his data "22666 pts/9 Sl+ 201:11 /root/miner/optiminer-zcash/optiminer-zcash -s ................ -u ................ -p x " .
November 14, 2016, 07:18:33 AM
hi, I use zec optiminer , how to show miner status under putty console ? it should be "screen " with some command....?
You can watch console from dashboard with 10 second refresh time.
If you want to do this from ssh:
this will list avilable screens: screen -x
miner console: screen -x miner
to exit from screen and not kill it: ctrl+a+d (three keys at the same time)
November 14, 2016, 07:12:55 AM
hi, I use zec optiminer , how to show miner status under putty console ? it should be "screen " with some command....?
November 14, 2016, 07:09:04 AM
Hi, this thing does work but I do not manage to get 6 Rx 470 cards on rig running. Only 5 are recognized. The problem might however be on my hardware of there are some other rigs with 6 rx cards taht do work as expected..
Yep, must be riser propobly.
November 14, 2016, 07:06:20 AM
Hi, this thing does work but I do not manage to get 6 Rx 470 cards on rig running. Only 5 are recognized. The problem might however be on my hardware of there are some other rigs with 6 rx cards taht do work as expected..
November 14, 2016, 06:28:14 AM
I have priority goals:
- creating global online web chat integrated in dashboard so i can comunicate with you guys and react faster to any problems
- rebuild update system - i would like to have beta testing group which could test new update before i deploy to all rigs.
( i have my testing development units but as i see its not enough becasue i have undervolted gpus and i need to cover and test more different configurations)
- creating global online web chat integrated in dashboard so i can comunicate with you guys and react faster to any problems
- rebuild update system - i would like to have beta testing group which could test new update before i deploy to all rigs.
( i have my testing development units but as i see its not enough becasue i have undervolted gpus and i need to cover and test more different configurations)
November 14, 2016, 06:19:25 AM
2016-11-14 09:42:29,573 ERROR [default] OpenCL error: Failed to read bin/X_round2.bin (-1)
am getting this error while trying to mine with "optiminer-zcash-v0.31"
rig is 6x rx480
am getting this error while trying to mine with "optiminer-zcash-v0.31"
rig is 6x rx480
Can you reflash stick and try booting again (it will download updates again) and tell me if problem still exists ?
Alternative if you can - can you give me team viewer access to any windows station that is in the same network as linux rig miner ?
So i can login via putty (ssh) to miner and see what is goin on ?- Those information would be helpfull.i
If you can then please send those Team Viewer info to [email protected] - NOT HERE OFCOURSE !
Thx
November 14, 2016, 06:11:37 AM
Today i will be making custom option to set target temperature in dashboard
now %fan 40% and temperature 70%+
i want temperature 60-65 % per card and %fan 50-65 %
thank you for support.
Please fix %fan min 40-50% for rx version.
thank you
Ok then i will do in dashboard two parameters with min fan speed and target temperature.
Anyway whats wrong with current minimal speed ?
Also tell me whats wrong with this fan speed alghoritm ?
I will improve it, just tell me whats wrong
And also renember to write wchich OS you are reffering to, R or RX (its big difference
thank you
Ok then i will do in dashboard two parameters with min fan speed and target temperature.
Anyway whats wrong with current minimal speed ?
Also tell me whats wrong with this fan speed alghoritm ?
I will improve it, just tell me whats wrong
And also renember to write wchich OS you are reffering to, R or RX (its big difference
now %fan 40% and temperature 70%+
i want temperature 60-65 % per card and %fan 50-65 %
thank you for support.
November 14, 2016, 06:03:50 AM
2016-11-14 09:42:29,573 ERROR [default] OpenCL error: Failed to read bin/X_round2.bin (-1)
am getting this error while trying to mine with "optiminer-zcash-v0.31"
rig is 6x rx480
am getting this error while trying to mine with "optiminer-zcash-v0.31"
rig is 6x rx480
Jump to: