miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX

miniZ

member

Activity: 690

Merit: 17

Hi everyone,

A new miniZ version v2.4e is out with added support for FishHash (IRON).

Also, added support for Meraki (TLS) and Nexell-AI (NXL).

Thank you all for your feedback and suggestions!

Please find miniZ version v2.4e @ Download page

Changelog:
* Added support for FishHash algo - Iron Fish Coin (IRON).
   For AMD and NVIDIA. Fee: 1%.
* Added support for Meraki algo - Telestai (TLS).
   For AMD and NVIDIA. Fee: 1%.
* Added support for NxlHash algo - Nexell-AI (NXL).
   For AMD and NVIDIA. Fee: 1%.
* Added --par=meowpow.
* Removed support for KarlsenHash and PyrinHash.^*
* Few minor fixes.

^*You’ll be able to dual mine with Nexell-AI.

*** Thank you all for the feedback! ***

For additional information check our Usage or FAQ pages.

Download miniZ latest version here.

Follow us on X/Twitter

Happy mining!

miniZ

member

Activity: 690

Merit: 17

Quote from: John-117 on December 12, 2024, 05:52:04 AM

Hello miniZ

Would you be kind enough to expand support to our Meraki algorithm?

We're a ProgPoW variant and would enjoy having additional mining software support.

https://github.com/Telestai-Project

Thank you.

Hi John-117,
Thank you for your suggestion.
We're working on it for the next release.

Cheers

John-117

newbie

Activity: 16

Merit: 0

Hello miniZ

Would you be kind enough to expand support to our Meraki algorithm?

We're a ProgPoW variant and would enjoy having additional mining software support.

https://github.com/Telestai-Project

Thank you.

miniZ

member

Activity: 690

Merit: 17

Quote from: TBOEMC on July 22, 2024, 08:28:05 AM

Hello there,
I am not able to run 2.4d
In the same rigs, drivers, cards, settings (OC and without OC), AV exceptions (or OFF).
New version only "blinks" for about 0,5sec and closes. No erros, no warnings.
Version 2.2 runs good and stable.
Also tried just run standalone miner with just doubleclick - the same result.

Hi TBOEMC,
Thank you for your feedback.
Could you please try the new version v2.4d2, and let us know if the issue is resolved?
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: somaton on October 29, 2024, 05:07:31 AM

192.7 stopped working with latest and older versions few days ago. Working only for first ~30min, then stops. Dev-fee server problem? Same with different pools.

Hi somaton,
Thanks for your message.

It should be running OK now.
Cheers

miniZ

member

Activity: 690

Merit: 17

Hi everyone,

A new miniZ version v2.4d2 is out with various fixes and added support for MeowPow (MEWC).

Thank you all for your feedback and suggestions!

Please find miniZ version v2.4d2 @ Download page

Changelog:

* Added support for MeowPow algo - MeowCoin (MEWC). Fee: 1.0%.
* Fixed memory leak on ProgPow family algorithms.
* Fixed BEAM (144,5s) mining on Windows.
* Fixed GRIMM (150,5) mining on Windows.
* Fixed AION (210,9) mining on Windows.
* Few minor fixes.

*** Thank you all for the feedback! ***

For additional information check our Usage or FAQ pages.

Download miniZ latest version here.

Follow us on X/Twitter

Happy mining!

somaton

jr. member

Activity: 212

Merit: 6

192.7 stopped working with latest and older versions few days ago. Working only for first ~30min, then stops. Dev-fee server problem? Same with different pools.

TBOEMC

jr. member

Activity: 41

Merit: 1

Hello there,
I am not able to run 2.4d
In the same rigs, drivers, cards, settings (OC and without OC), AV exceptions (or OFF).
New version only "blinks" for about 0,5sec and closes. No erros, no warnings.
Version 2.2 runs good and stable.
Also tried just run standalone miner with just doubleclick - the same result.

somaton

jr. member

Activity: 212

Merit: 6

Quote from: miniZ on June 29, 2024, 08:35:55 AM

Hi somaton,

Thank you for the feedback.

Could you try adding --stale=200 (or maybe 300) to your command line and see if it helps?

Cheers

Hi, i tried --stale=300 and it does not help, still too much rejects compared to 2.2c.

miniZ

member

Activity: 690

Merit: 17

Quote from: Sikkan666 on July 03, 2024, 02:25:06 PM

Quote from: miniZ on June 15, 2024, 03:11:21 PM

Quote from: Sikkan666 on April 29, 2024, 04:40:51 AM

hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)

Tried to downgrade version but all I get is this:

any clues? currently I have to use another miner on the w5700 that is slower

Hi Sikkan666,
Sorry, this is not yet resolved in the new version.
Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3.
Let us know if this helps.
Cheers

hey, it actually started mining on the card.. crashed after a few mins but that was probably due to a bad OC for this algo.. and also, it had the same speed as the other cards

what does mode 22 do?

Hi Sikkan666,

Thanks for your message.

In some cases you may want to select a specific mode/kernel for miniZ to run in your GPU.

In this case --mode3=22 selects mode/kernel 22 to run on GPU3. (miniZ was not selecting the correct kernel for your GPU.)

It is possible that some kernels do become unstable and others do not, when applying OCs. Have you tried adjusting OCs?

In any case, we appreciate that you leave us a message if a mode is dramatically unstable also after trying with stock settings.

Cheers

Sikkan666

member

Activity: 240

Merit: 11

Quote from: miniZ on June 15, 2024, 03:11:21 PM

Quote from: Sikkan666 on April 29, 2024, 04:40:51 AM

hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)

Tried to downgrade version but all I get is this:

any clues? currently I have to use another miner on the w5700 that is slower

Hi Sikkan666,
Sorry, this is not yet resolved in the new version.
Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3.
Let us know if this helps.
Cheers

hey, it actually started mining on the card.. crashed after a few mins but that was probably due to a bad OC for this algo.. and also, it had the same speed as the other cards

what does mode 22 do?

miniZ

member

Activity: 690

Merit: 17

Quote from: somaton on June 25, 2024, 03:59:57 PM

and still too much stales/rejects with 2.4d like with 2.3c when mining 125.4, so, back again to 2.2c

Hi somaton,

Thank you for the feedback.

Could you try adding --stale=200 (or maybe 300) to your command line and see if it helps?

Cheers

somaton

jr. member

Activity: 212

Merit: 6

and still too much stales/rejects with 2.4d like with 2.3c when mining 125.4, so, back again to 2.2c

somaton

jr. member

Activity: 212

Merit: 6

Of course i tried without any oc settings. Like i said, previous version starts fine with same command line (without --minimum), but this new one not. I run miniz from bat file with loop command, and it will open one more window for miniz, but it will be closed right after miniz it triying to select gpu, then again open new window and will not stop until bat with loop command is closed manually.

Tried with other rig, same story - exiting right after selecting gpu:

************ miniZ v2.4d ************
Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1
Driver:      528.49
Algo:      [Equihash125,4] [smart-pers]
Pool#0:    user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof]
Pool#1:    user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin]
Logging::    file[miniz-pyrin-125.4-nice.log] period[10] delay[0]
Optimisation:   ocX[0]
Temp. limit:   [90 C]
[INFO ] Mining fee set to 2.00%
[INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560
miniZ[19:0:00.0: 7113]: Selecting GPU#0[0] ASUS GeForce RTX 3070

mining just pyrin or 125.4 is working fine, but not together.

miniZ

member

Activity: 690

Merit: 17

Quote from: somaton on June 17, 2024, 09:58:20 AM

Here:

miniZ.exe [email protected]:9200 [email protected]:9200 --pass=x --priority=1 --telemetry=0 --minimal --logfile miniz-pyrin-125.4-nice.log --gpuclock=1560 --fanspeed=42 --fantemp=65 --gpuoffset=240

lets hope it can be fixed fast

Hi somaton,
Thanks for the information.
We were able to run your command line...
Could it be that it didn't crash that it's just taking a bit longer to start?
Could you also try with stock settings, just to discard some issue with OCs?
Let us know if this helps.
Cheers

somaton

jr. member

Activity: 212

Merit: 6

Here:

miniZ.exe [email protected]:9200 [email protected]:9200 --pass=x --priority=1 --telemetry=0 --minimal --logfile miniz-pyrin-125.4-nice.log --gpuclock=1560 --fanspeed=42 --fantemp=65 --gpuoffset=240

lets hope it can be fixed fast

miniZ

member

Activity: 690

Merit: 17

Quote from: somaton on June 16, 2024, 04:48:13 AM

Hi, did not had time to check 125.4 with new version, but tried 125.4 + pyrin and it does not work. Is it me or something else?

************ miniZ v2.4d ************
Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1
Driver:      528.49
Algo:      [Equihash125,4] [smart-pers]
Pool#0:    user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof]
Pool#1:    user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin]
Logging::    file[miniz-pyrin-125.4-nice.log] period[10] delay[0]
Optimisation:   ocX[0]
Temp. limit:   [90 C]
[INFO ] Mining fee set to 2.00%
[INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560
miniZ[18:0:00.0: 9087]: Selecting GPU#0[0] Gigabyte RTX3080 Gaming OC 10G

It is crashing right after selecting gpu. Tried with 2.3c and it does start mining, but it is mining 125.4 only and does not show anything about pyrin?

Hi somaton,
Thanks for the message.
Could you paste here your command line?
Cheers

somaton

jr. member

Activity: 212

Merit: 6

Hi, did not had time to check 125.4 with new version, but tried 125.4 + pyrin and it does not work. Is it me or something else?

************ miniZ v2.4d ************
Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1
Driver:      528.49
Algo:      [Equihash125,4] [smart-pers]
Pool#0:    user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof]
Pool#1:    user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin]
Logging::    file[miniz-pyrin-125.4-nice.log] period[10] delay[0]
Optimisation:   ocX[0]
Temp. limit:   [90 C]
[INFO ] Mining fee set to 2.00%
[INFO ] Applying clocks to GPU[00] core offset= +240MHz mem offset= +1MHz power= 0W gpuclk=1560
miniZ[18:0:00.0: 9087]: Selecting GPU#0[0] Gigabyte RTX3080 Gaming OC 10G

It is crashing right after selecting gpu. Tried with 2.3c and it does start mining, but it is mining 125.4 only and does not show anything about pyrin?

miniZ

member

Activity: 690

Merit: 17

Quote from: Sikkan666 on April 29, 2024, 04:40:51 AM

hey guys I am trying to mine some equihash 144,5 coins and it works great on both my RX 5700 and my RX 5700 XT but not w5700 pro (the card works great on other algos and/or other miners but miniz is by far faster)

Tried to downgrade version but all I get is this:

any clues? currently I have to use another miner on the w5700 that is slower

Hi Sikkan666,
Sorry, this is not yet resolved in the new version.
Please try adding --mode3=22 to your command line. This will run mode 22 in GPU#3.
Let us know if this helps.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: angelbbs on March 29, 2024, 03:10:27 AM

v2.3c
ZIL mining hashrate not available in API.

Hi angelbs,
You can check ZIL stats:

Code:

curl 'localhost:20000?/getstat"id":2' -s|jq

You can now also check ZIL stats on localhost:20000/zil

Cheers

Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX (Read 60004 times)