miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 55.

miniZ

member

Activity: 690

Merit: 17

Quote from: artful on April 29, 2019, 04:55:31 PM

Code:

+-----------------------------------------------------------------------------+
| NVIDIA-SMI 418.56       Driver Version: 418.56       CUDA Version: 10.1     |
|-------------------------------+----------------------+----------------------+
|  10  GeForce GTX 106...  On   | 00000000:0F:00.0 Off |                  N/A |
| 70%   56C    P2    87W /  96W |   3008MiB /  3019MiB |    100%      Default |
|   10      1062      G   /usr/lib/xorg/Xorg                             5MiB |
|   10      2654      C   ...ing/calcprofit/miners/miniz/1.3n3/miniZ  2991MiB |

3Gb / 418.56 / miniZ 1.3n3 - working fine

Hi artful,
That is very cheerful for us, thanks for letting us know!
Cheers

miniZ

member

Activity: 690

Merit: 17

artful

newbie

Activity: 59

Merit: 0

Code:

3Gb / 418.56 / miniZ 1.3n3 - working fine

MineOrDie

jr. member

Activity: 75

Merit: 1

Quote from: miniZ on April 29, 2019, 02:26:12 PM

Quote from: MineOrDie on April 29, 2019, 02:14:49 PM

I still cannot mine BEAM on Hive OS with GTX1060 3GB, 418.56 drivers.

Hi MineOrDie,

We tested it on Hive OS with 418.43, but it should work with your driver as well.
What is the error miniZ complains about for not starting?
If it is does not have enough memory you can try to add --mode=10 to the command line (this might be a problem if you have different cards models on your rig).

Also it may help us to track the problem if you run nvidia-smi without any miners runing and give us the output.

Cheers

I get this message:

Code:

Wanted to alloc: 2922 MB
out of memory::CUDA: failed to alloc memory for main data

1.3n3 version with --mode=10 added.

Code:

miniZ

member

Activity: 690

Merit: 17

Quote from: MineOrDie on April 29, 2019, 02:14:49 PM

I still cannot mine BEAM on Hive OS with GTX1060 3GB, 418.56 drivers.

Hi MineOrDie,

We tested it on Hive OS with 418.43, but it should work with your driver as well.
What is the error miniZ complains about for not starting?
If it is does not have enough memory you can try to add --mode=10 to the command line (this might be a problem if you have different cards models on your rig).

Also it may help us to track the problem if you run nvidia-smi without any miners runing and give us the output.

Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: stzcze on April 29, 2019, 01:54:21 PM

Quote from: miniZ on April 29, 2019, 12:31:27 PM

Quote from: stzcze on April 29, 2019, 11:32:20 AM

Hi, miner running 1-12h ok...after, no share to pool. +/++/n2 w10, G3930, rig 1060 rig 1080ti

Hi stzcze,
could you post here a bit of the console output (or log) of the time when this happened?
On what pool were you mining?
Thanks.
Cheers

pool: beam.leafpool.com

I'm trying now "n3" cpu load 22% nice work, n+=70% - G3930

I didn't have the log on, I turned it on - I'll send him next time .-)

Thanks

Hi stzcze,
Thanks for reporting the improvements, keep us updated!
cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: rgsnedds on April 29, 2019, 01:34:24 PM

is there a final release with fixes ready to go?
i'm a little confused with all the 1.3 versions. unsure which one i need to use.

for info, i've been running 1.3+ on mmpOS for around 50 hours now and it's flawless.

Hi rgsnedds,
Sorry about all this realtime fixing, but the issue we were facing was very hard to reproduce and
it was much faster to solve it with the help of everyone :-)
Version 1.3n3 solves the issues that people were facing (offline worker, slow start, sparkpool invalid shares), it
should be stable and the one to use, but after that laste few days is hard to be 100% sure!
Thanks for letting us know that it is running fine one mmpOS for 50h! That is very relieving :-)
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: psychopatical on April 29, 2019, 01:15:17 PM

What the difference between Win cuda 8 and Win cuda 10?
Using 1060 and 1080 gpus

new version 1.3n3 running smoothly

Hi psychopatical,
The win cuda 10 version requires a more recent driver, also usually performs better. But feel free to try both!
Let's hope that miniZ 1.3n3 keeps running fine :-) We did not find any issues with this version so far.
Cheers

MineOrDie

jr. member

Activity: 75

Merit: 1

I still cannot mine BEAM on Hive OS with GTX1060 3GB, 418.56 drivers.

stzcze

jr. member

Activity: 109

Merit: 1

Quote from: miniZ on April 29, 2019, 12:31:27 PM

Quote from: stzcze on April 29, 2019, 11:32:20 AM

Hi, miner running 1-12h ok...after, no share to pool. +/++/n2 w10, G3930, rig 1060 rig 1080ti

Hi stzcze,
could you post here a bit of the console output (or log) of the time when this happened?
On what pool were you mining?
Thanks.
Cheers

pool: beam.leafpool.com

I'm trying now "n3" cpu load 22% nice work, n+=70% - G3930

I didn't have the log on, I turned it on - I'll send him next time .-)

Thanks

rgsnedds

member

Activity: 952

Merit: 17

raskul

is there a final release with fixes ready to go?
i'm a little confused with all the 1.3 versions. unsure which one i need to use.

for info, i've been running 1.3+ on mmpOS for around 50 hours now and it's flawless.

miniZ

member

Activity: 690

Merit: 17

Quote from: topteam on April 29, 2019, 01:09:14 PM

Quote from: miniZ on April 27, 2019, 07:07:14 PM

Quote from: ARTRN on April 27, 2019, 06:30:10 PM

Latest 1.3n+ still suffer from miner offline in pool just like the previous version. Whatever changes on this version doesn't fix the dreaded offline. Mining on algo 150.5.

Hi ARTRN,
We are sorry about that...
We really want to get rid of that issue, but it is very hard to replicate.
On which pool were you mining?
Thanks.
Cheers

have the same problem on 1.3n+, now run 1.3n2
ubuntu 16 396.82, 144,5, miningpoolhub

Hi topteam,
Sorry about that, it was solved on v1.3n2, but it is better if you try v1.3n3

Cheers

psychopatical

newbie

Activity: 6

Merit: 0

What the difference between Win cuda 8 and Win cuda 10?
Using 1060 and 1080 gpus

new version 1.3n3 running smoothly

topteam

newbie

Activity: 157

Merit: 0

Quote from: miniZ on April 27, 2019, 07:07:14 PM

Quote from: ARTRN on April 27, 2019, 06:30:10 PM

Latest 1.3n+ still suffer from miner offline in pool just like the previous version. Whatever changes on this version doesn't fix the dreaded offline. Mining on algo 150.5.

Hi ARTRN,
We are sorry about that...
We really want to get rid of that issue, but it is very hard to replicate.
On which pool were you mining?
Thanks.
Cheers

have the same problem on 1.3n+, now run 1.3n2
ubuntu 16 396.82, 144,5, miningpoolhub

miniZ

member

Activity: 690

Merit: 17

Quote from: stzcze on April 29, 2019, 11:32:20 AM

Hi, miner running 1-12h ok...after, no share to pool. +/++/n2 w10, G3930, rig 1060 rig 1080ti

Hi stzcze,
could you post here a bit of the console output (or log) of the time when this happened?
On what pool were you mining?
Thanks.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: somaton on April 29, 2019, 09:04:10 AM

n2 crashed same way like + and ++, usually takes only a few hours to get it. Log is totally useless - there is nothing at all, windows says miniz.exe crashed with module ntdll.dll, version: 6.3.9600.18821

Hi somaton,
That crash may be related to your OC settings. Try to adjust them and see if it persists.
We have just released miniZ v1.3n3 and it should output some error now.
If it happens again let us know what it logs.
Thanks.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: AltScope on April 29, 2019, 03:10:33 AM

also been mining BEAM on sparkpool, latest version (1.3n2?) stil has issues with rejects there, 186 accepted 0 rejects according to miner 5.57% invalid 1% stale on sparkpool with high invalid/delay notification.

rig of mixed cards 2*1080, 2*1080ti 1*1070ti win 10 8GB RAM 64GB Virtual Memory allocated running at 60% power through MSI afterburner no issues noticed at sunpool

Quote from: Nbdy on April 29, 2019, 04:44:04 AM

Started with 1.3n2 today,will see how it will show trough time ...

The 1.3n+ worked for day and 7 hours,and then started crashing and showing false shares ...

I'm on sparkpool 2,but the eu part of it,should I change it be cause of ping Huh

The miner crushed again after 3 hours of mining ...

Must admit that there is a problem restarting miniZ even on sunpool ...

He has some overclocking error,and after 4 restarts,and 2 reboots he finaly got to work on sunpool ...

Hi AltScope, Nbdy,

Thanks you for your feedback.
We have just released miniZ v1.3n3 and the sparkpool issue should is fixed now.

@Nbdy, the crash may be related to your OC settings. Try to adjust them and see if it persists.

Let us know if the new release helped.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: artful on April 29, 2019, 02:16:58 AM

hello
i have 19 GPU in one PC, me launch miniZ:

WTF??? Temp -31455247°C, FAN: 50528255%

after 3 min work me see log:

very long init miner

string launch:
miniZ --par=150,5 --server beam.eu.nicehash.com --port 3370 --user WALLET.CPz000000108 --telemetry=0

if you need access to my pc - no problem, linux + ssh + external ip

Hi artful,
Thanks a lot for your logs. If this issue is not fixed we may take your ssh offer later

We have just released miniZ v1.3n3 and this slow init is fixed now.
The weird values should be related to the slow start.
Cheers

stzcze

jr. member

Activity: 109

Merit: 1

Hi, miner running 1-12h ok...after, no share to pool. +/++/n2 w10, G3930, rig 1060 rig 1080ti

somaton

jr. member

Activity: 211

Merit: 6

n2 crashed same way like + and ++, usually takes only a few hours to get it. Log is totally useless - there is nothing at all, windows says miniz.exe crashed with module ntdll.dll, version: 6.3.9600.18821

Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 55. (Read 59613 times)