Perfect that you are preparing a version for Vertcoin to supernova, a good job. We will wait for the functional lines for Version 2.0.1 on the OP.
Here are my results for Version 2.0.0: https://imgur.com/65DiIV3
With this result I had GPU 1145/2000 and the consumption is 770 W. The temperature is in the standard up to 68 degrees. Everything above is either high consumption or too high degrees on the core.
In this mode I see it for long-term mining. I can play with voltage on the core, but only later.
Topic: mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA... - page 27. (Read 52770 times)
December 12, 2017, 01:58:52 PM
December 12, 2017, 12:55:24 PM
Winmkx,
Please help me with my issue:
https://bitcointalksearch.org/topic/m.26148197
If the program at least offered some information about what is preventing it from starting, I would be capable of trying something else.
So far, I have tried every single option.
Please help me with my issue:
https://bitcointalksearch.org/topic/m.26148197
If the program at least offered some information about what is preventing it from starting, I would be capable of trying something else.
So far, I have tried every single option.
December 12, 2017, 12:52:38 PM
It says on the bottom, add "--platform 1" to your command line (.conf file/.bat file) if platform 1 doesn't work, try 0 or 2, my AMD were on platform 2
I hope this works for you, I had the same problem but I was playing with -d 1 config, so was completely off track.
I hope this works for you, I had the same problem but I was playing with -d 1 config, so was completely off track.
Thank you for your reply but as you can see in my post, I tried all the available platforms, just to ensure the OP wouldn't tell me to try another one.
December 12, 2017, 11:53:49 AM
First of all: Great miner!
I was running this miner as a test for 4 days on my R9 270X and it worked great. But unfortunately when I tried running it with my RX 580 it instant crashes my pc. All other mining software work fine, no issues. Is there something I'm doing wrong? I've tried changing the platforms, I've tried running it with and without --asm but it still crashes the PC no matter what.
Anyone got any advice?
I was running this miner as a test for 4 days on my R9 270X and it worked great. But unfortunately when I tried running it with my RX 580 it instant crashes my pc. All other mining software work fine, no issues. Is there something I'm doing wrong? I've tried changing the platforms, I've tried running it with and without --asm but it still crashes the PC no matter what.
Anyone got any advice?
Hello!
Try different AMD drivers. 16.10.3 definitely works fine. I'm using it myself on RX580.
Try example.cmd (included in mkxminer) without any changes. Still crashes?
Thanks.
December 12, 2017, 10:29:07 AM
First of all: Great miner!
I was running this miner as a test for 4 days on my R9 270X and it worked great. But unfortunately when I tried running it with my RX 580 it instant crashes my pc. All other mining software work fine, no issues. Is there something I'm doing wrong? I've tried changing the platforms, I've tried running it with and without --asm but it still crashes the PC no matter what.
Anyone got any advice?
I was running this miner as a test for 4 days on my R9 270X and it worked great. But unfortunately when I tried running it with my RX 580 it instant crashes my pc. All other mining software work fine, no issues. Is there something I'm doing wrong? I've tried changing the platforms, I've tried running it with and without --asm but it still crashes the PC no matter what.
Anyone got any advice?
December 12, 2017, 04:33:39 AM
Update: the new version that works with VTC suprnova pool is ready, but release is delayed. Hopefully not for a long time. Initial difficulty on vtc pool is too high, should be an easy fix. Once it's fixed, the new version will be released.
December 11, 2017, 08:40:27 PM
Would REALLY love a Linux version of this miner !!! 
December 11, 2017, 05:44:45 PM
this miner working perfectly good with my 4x rx 480 mining mona!!! thanks!!!!!
December 11, 2017, 04:35:35 PM
Update: a new version that works with suprnova VTC pool will be released today in about 12 hours!
So you will be able to mine your Vertcoin.
So you will be able to mine your Vertcoin.
And today VTC halving is done XD.
December 11, 2017, 04:19:58 PM
Any chance for a XZC (ZCoin) version?
December 11, 2017, 01:40:57 PM
Update: a new version that works with suprnova VTC pool will be released today in about 12 hours!
So you will be able to mine your Vertcoin.
So you will be able to mine your Vertcoin.
December 11, 2017, 01:19:21 PM
The miner works. of course dont run anything mining related on computers that have bitcoin on them 
It can only connect to TLS ports, so that limits the pools you can go to. Your performance will vary and the miner is just a normal miner, nothing fancy.
It can only connect to TLS ports, so that limits the pools you can go to. Your performance will vary and the miner is just a normal miner, nothing fancy. December 11, 2017, 11:59:15 AM
So is this miner legit or not? I read a lot of different things. Is it only working on nicehash and what is the dev fee?
I can not answer all your questions, but at least one. Version 1 worked only on the nicehash pool. The current version also works on the suprnova pool. December 11, 2017, 11:47:16 AM
So is this miner legit or not? I read a lot of different things. Is it only working on nicehash and what is the dev fee?
I can not answer all your questions, but at least one. Version 1 worked only on the nicehash pool. The current version also works on the suprnova pool. December 11, 2017, 11:34:36 AM
What is dev fee?
December 11, 2017, 11:30:34 AM
So is this miner legit or not? I read a lot of different things. Is it only working on nicehash and what is the dev fee?
December 11, 2017, 11:16:14 AM
Needs work but promising (Y)
December 11, 2017, 10:48:30 AM
Hello winmkx,
Thank you for creating this program.
I have been trying to use it but no matter what I try, the program never starts mining, it just goes back to the command prompt without giving any reason why.
Please take a look at everything I tried so far (as a clarification, Sgminer says my AMD cards are on platform 1):
Thank you for creating this program.
I have been trying to use it but no matter what I try, the program never starts mining, it just goes back to the command prompt without giving any reason why.
Please take a look at everything I tried so far (as a clarification, Sgminer says my AMD cards are on platform 1):
Quote
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 2 --asm --reorder
[10:14:39 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:14:41 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:14:41 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:14:41 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:14:45 - 0 days 00:00:05] Connected!
[10:14:46 - 0 days 00:00:07] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:14:48 - 0 days 00:00:08] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:14:50 - 0 days 00:00:10] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:14:50 - 0 days 00:00:11] --- Detected GPUs ---
[10:14:50 - 0 days 00:00:11] GPU#0: Radeon RX 580 Series
[10:14:50 - 0 days 00:00:11] GPU#1: Radeon RX 580 Series
[10:14:50 - 0 days 00:00:11] GPU#2: Radeon RX 580 Series
[10:14:50 - 0 days 00:00:11]
[10:14:50 - 0 days 00:00:11] Press Ctrl+C to exit application
[10:14:50 - 0 days 00:00:11]
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 2 --asm
[10:16:11 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:16:13 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:16:13 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:16:13 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:16:17 - 0 days 00:00:05] Connected!
[10:16:19 - 0 days 00:00:07] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:20 - 0 days 00:00:09] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:22 - 0 days 00:00:10] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:24 - 0 days 00:00:12] --- Detected GPUs ---
[10:16:24 - 0 days 00:00:12] GPU#0: Radeon RX 580 Series
[10:16:24 - 0 days 00:00:12] GPU#1: Radeon RX 580 Series
[10:16:24 - 0 days 00:00:12] GPU#2: Radeon RX 580 Series
[10:16:24 - 0 days 00:00:12]
[10:16:24 - 0 days 00:00:12] Press Ctrl+C to exit application
[10:16:24 - 0 days 00:00:12]
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 2
[10:16:44 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:16:46 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:16:46 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:16:46 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:16:51 - 0 days 00:00:06] Connected!
[10:16:53 - 0 days 00:00:08] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:54 - 0 days 00:00:10] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:57 - 0 days 00:00:13] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:59 - 0 days 00:00:14] --- Detected GPUs ---
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 20 --platform 2 --asm
[10:17:40 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:17:42 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:17:42 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:17:42 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:17:46 - 0 days 00:00:05] Connected!
[10:17:48 - 0 days 00:00:07] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:17:49 - 0 days 00:00:09] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:17:51 - 0 days 00:00:11] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:17:53 - 0 days 00:00:12] --- Detected GPUs ---
[10:17:53 - 0 days 00:00:12] GPU#0: Radeon RX 580 Series
[10:17:53 - 0 days 00:00:12] GPU#1: Radeon RX 580 Series
[10:17:53 - 0 days 00:00:12] GPU#2: Radeon RX 580 Series
[10:17:53 - 0 days 00:00:12]
[10:17:53 - 0 days 00:00:12] Press Ctrl+C to exit application
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 1
[10:43:26 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:43:28 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:43:32 - 0 days 00:00:06] Connected!
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 0
[10:43:36 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:43:38 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:43:38 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:43:38 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:43:41 - 0 days 00:00:05] Device not supported: "Intel(R) HD Graphics 510". Only AMD GCN devices are supported currently. If you have Intel CPU and AMD cards, then please add "--platform 1" to your command line.
C:\Users\Winuser\Desktop\mkxminer>
[10:14:39 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:14:41 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:14:41 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:14:41 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:14:45 - 0 days 00:00:05] Connected!
[10:14:46 - 0 days 00:00:07] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:14:48 - 0 days 00:00:08] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:14:50 - 0 days 00:00:10] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:14:50 - 0 days 00:00:11] --- Detected GPUs ---
[10:14:50 - 0 days 00:00:11] GPU#0: Radeon RX 580 Series
[10:14:50 - 0 days 00:00:11] GPU#1: Radeon RX 580 Series
[10:14:50 - 0 days 00:00:11] GPU#2: Radeon RX 580 Series
[10:14:50 - 0 days 00:00:11]
[10:14:50 - 0 days 00:00:11] Press Ctrl+C to exit application
[10:14:50 - 0 days 00:00:11]
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 2 --asm
[10:16:11 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:16:13 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:16:13 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:16:13 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:16:17 - 0 days 00:00:05] Connected!
[10:16:19 - 0 days 00:00:07] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:20 - 0 days 00:00:09] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:22 - 0 days 00:00:10] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:24 - 0 days 00:00:12] --- Detected GPUs ---
[10:16:24 - 0 days 00:00:12] GPU#0: Radeon RX 580 Series
[10:16:24 - 0 days 00:00:12] GPU#1: Radeon RX 580 Series
[10:16:24 - 0 days 00:00:12] GPU#2: Radeon RX 580 Series
[10:16:24 - 0 days 00:00:12]
[10:16:24 - 0 days 00:00:12] Press Ctrl+C to exit application
[10:16:24 - 0 days 00:00:12]
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 2
[10:16:44 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:16:46 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:16:46 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:16:46 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:16:51 - 0 days 00:00:06] Connected!
[10:16:53 - 0 days 00:00:08] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:54 - 0 days 00:00:10] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:57 - 0 days 00:00:13] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:16:59 - 0 days 00:00:14] --- Detected GPUs ---
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 20 --platform 2 --asm
[10:17:40 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:17:42 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:17:42 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:17:42 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:17:46 - 0 days 00:00:05] Connected!
[10:17:48 - 0 days 00:00:07] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:17:49 - 0 days 00:00:09] Device not supported: "GeForce GTX 970". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:17:51 - 0 days 00:00:11] Device not supported: "GeForce GTX 1070". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[10:17:53 - 0 days 00:00:12] --- Detected GPUs ---
[10:17:53 - 0 days 00:00:12] GPU#0: Radeon RX 580 Series
[10:17:53 - 0 days 00:00:12] GPU#1: Radeon RX 580 Series
[10:17:53 - 0 days 00:00:12] GPU#2: Radeon RX 580 Series
[10:17:53 - 0 days 00:00:12]
[10:17:53 - 0 days 00:00:12] Press Ctrl+C to exit application
C:\Users\Winuser\Desktop\mkxminer>
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 1
[10:43:26 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:43:28 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:43:32 - 0 days 00:00:06] Connected!
C:\Users\Winuser\Desktop\mkxminer>mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u Pooluser.Rig4 -p x -I 23 --platform 0
[10:43:36 - 0 days 00:00:00] Starting mkxminer v2.0.0...
[10:43:38 - 0 days 00:00:01] ADL / OpenCL devices mismatch!
[10:43:38 - 0 days 00:00:01] Hardware monitoring is not accurate, check your drivers setup
[10:43:38 - 0 days 00:00:01] Connecting to stratum+tls://stak.suprnova.cc:7710 as Pooluser.Rig4...
[10:43:41 - 0 days 00:00:05] Device not supported: "Intel(R) HD Graphics 510". Only AMD GCN devices are supported currently. If you have Intel CPU and AMD cards, then please add "--platform 1" to your command line.
C:\Users\Winuser\Desktop\mkxminer>
December 11, 2017, 10:21:12 AM
Not working with "Tonga".
December 11, 2017, 04:47:23 AM
wow this miner is very fast!!!
thanks a lots i really like it
i will let you know in next days
4x rx 480 8gb 35mh each on Mona great results!!!
thanks a lots i really like it
i will let you know in next days
4x rx 480 8gb 35mh each on Mona great results!!!
Jump to: