Topic: M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner - page 10. (Read 209242 times)
March 16, 2015, 09:19:36 PM
is the alert for hash speed broken, it used to work a few version ago, but with the latest it won't trigger unless i put something ridiculous like 450000000 for a s3, the other alert like temp and fan speed works.
March 10, 2015, 05:29:08 AM
I do have a valid MM key......the mining hardware I use is all bitmain; s1 [yes I have a few], s2, s3's and of course the c1 I bought from you. I have the check box checked on your 5.0 software....and the key is typed in. What could I be missing??
Check for leading and trailing spaces on the email address and key?
M
Do I need to have any other software running on my pc for mobile miner to work or will your program feed their system properly?
Just make sure you have the MMinerMOnitor.MobileMinerAPI.dll file in the same folder. Otherwise, no, it should all work.
Re memory usage.. check your task manager to see how much it is using? CPU usage should be minimal.
M
re: MMinerMOnitor.MobileMinerAPI.dll
who has the file? where do I get it? where does it need to be on my computer, specifically?
It's inside the zip file for M's Miner Monitor. It needs to be in the same folder as MMinerMonitor.exe.
M
March 09, 2015, 10:23:41 PM
I do have a valid MM key......the mining hardware I use is all bitmain; s1 [yes I have a few], s2, s3's and of course the c1 I bought from you. I have the check box checked on your 5.0 software....and the key is typed in. What could I be missing??
Check for leading and trailing spaces on the email address and key?
M
Do I need to have any other software running on my pc for mobile miner to work or will your program feed their system properly?
Just make sure you have the MMinerMOnitor.MobileMinerAPI.dll file in the same folder. Otherwise, no, it should all work.
Re memory usage.. check your task manager to see how much it is using? CPU usage should be minimal.
M
re: MMinerMOnitor.MobileMinerAPI.dll
who has the file? where do I get it? where does it need to be on my computer, specifically?
March 07, 2015, 10:38:13 PM
i can't see any output that has 0.0071 anywhere
i dont think its only 1 miner either, because i get no data on mobileminer at all
Would you look at the output grid for your miners and see what value would be 0.0071?
M
i dont think its only 1 miner either, because i get no data on mobileminer at all
got 10 antminer s3 and two S5's
my locale on my computer is Norwegian if that has anything to do with it
my locale on my computer is Norwegian if that has anything to do with it
Would you look at the output grid for your miners and see what value would be 0.0071?
M
Okay. Please use the "get miner info" button for two or three of your miners and PM me the output please. With that I should be able to figure out what's wrong.
M
March 07, 2015, 10:36:59 PM
Any other options for pulling an output to get a more accurate answer?
Spondoolies should fix it. There isn't a valid value to read.
M
FWIW I have tried reporting this to Spondoolies via forums, email, and Skype with absolutely no luck. They claim there is nothing for them to fix.
I even created and hosted and Open Source shell script that reproduces the issue outside of miners / monitors:
https://github.com/nwoolls/MultiMiner/blob/master/RPC-API-Test/rpc-api-test.sh
I'll try contacting them and seeing what happens.
I no longer have any SP20s to reproduce this with. All of hardware is offsite, and SP20s are very conducive to offsite hosting.
M
March 07, 2015, 10:59:21 AM
i can't see any output that has 0.0071 anywhere
i dont think its only 1 miner either, because i get no data on mobileminer at all
Would you look at the output grid for your miners and see what value would be 0.0071?
M
i dont think its only 1 miner either, because i get no data on mobileminer at all
got 10 antminer s3 and two S5's
my locale on my computer is Norwegian if that has anything to do with it
my locale on my computer is Norwegian if that has anything to do with it
Would you look at the output grid for your miners and see what value would be 0.0071?
M
March 07, 2015, 10:08:39 AM
Any other options for pulling an output to get a more accurate answer?
Spondoolies should fix it. There isn't a valid value to read.
M
FWIW I have tried reporting this to Spondoolies via forums, email, and Skype with absolutely no luck. They claim there is nothing for them to fix.
I even created and hosted and Open Source shell script that reproduces the issue outside of miners / monitors:
https://github.com/nwoolls/MultiMiner/blob/master/RPC-API-Test/rpc-api-test.sh
March 05, 2015, 06:02:34 PM
got 10 antminer s3 and two S5's
my locale on my computer is Norwegian if that has anything to do with it
my locale on my computer is Norwegian if that has anything to do with it
Would you look at the output grid for your miners and see what value would be 0.0071?
M
March 05, 2015, 08:53:06 AM
Any other options for pulling an output to get a more accurate answer?
Spondoolies should fix it. There isn't a valid value to read.
M
March 04, 2015, 07:10:00 PM
Got it, I'm a dummy, was over thinking what you were saying
EDIT:
Hmm Ms is showing my sp20s as running anywhere from 1.3TH to 2.8
I think the new update screwed something up
5s rate or avg? The 5s rate jumps all over the place.
I haven't touched the SP logic in quite a while.
M
AVG rate on them is anywhere from 1.5 to 2.87, wish these guys could pull that lol
Okay. Would you please go the address of one of your SP20s /monitor.php (ie 192.168.0.90/monitor.php) and PM me the output? Then I can see if the unit is reporting it wrong, or if my app is reading it wrong.
M
FYI to others who may read this, the output from his SP20 is showing the erratic readings. It's not my application that is mis-interpreting them.
M
Any other options for pulling an output to get a more accurate answer?
March 03, 2015, 06:39:50 PM
got 10 antminer s3 and two S5's
my locale on my computer is Norwegian if that has anything to do with it
my locale on my computer is Norwegian if that has anything to do with it
If you're using the web scraping, things may not work right. Otherwise the locale shouldn't matter.
M
March 03, 2015, 06:00:59 PM
got 10 antminer s3 and two S5's
my locale on my computer is Norwegian if that has anything to do with it
my locale on my computer is Norwegian if that has anything to do with it
March 01, 2015, 01:44:44 PM
using version 5.1 and getting the following in my log after activating mobileminer
01.03.2015 14:46:09: Error occurred submitting MobileMiner stats: Conversion from string "0.0071" to type 'Double' is not valid.
is there anything i missconfigured ?
01.03.2015 14:46:09: Error occurred submitting MobileMiner stats: Conversion from string "0.0071" to type 'Double' is not valid.
is there anything i missconfigured ?
Any idea what that 0.0071 might be from?
What hardware are you using?
M
March 01, 2015, 01:43:58 PM
Got it, I'm a dummy, was over thinking what you were saying
EDIT:
Hmm Ms is showing my sp20s as running anywhere from 1.3TH to 2.8
I think the new update screwed something up
5s rate or avg? The 5s rate jumps all over the place.
I haven't touched the SP logic in quite a while.
M
AVG rate on them is anywhere from 1.5 to 2.87, wish these guys could pull that lol
Okay. Would you please go the address of one of your SP20s /monitor.php (ie 192.168.0.90/monitor.php) and PM me the output? Then I can see if the unit is reporting it wrong, or if my app is reading it wrong.
M
FYI to others who may read this, the output from his SP20 is showing the erratic readings. It's not my application that is mis-interpreting them.
M
March 01, 2015, 09:47:17 AM
using version 5.1 and getting the following in my log after activating mobileminer
01.03.2015 14:46:09: Error occurred submitting MobileMiner stats: Conversion from string "0.0071" to type 'Double' is not valid.
is there anything i missconfigured ?
01.03.2015 14:46:09: Error occurred submitting MobileMiner stats: Conversion from string "0.0071" to type 'Double' is not valid.
is there anything i missconfigured ?
February 28, 2015, 10:42:40 PM
Got it, I'm a dummy, was over thinking what you were saying
EDIT:
Hmm Ms is showing my sp20s as running anywhere from 1.3TH to 2.8
I think the new update screwed something up
5s rate or avg? The 5s rate jumps all over the place.
I haven't touched the SP logic in quite a while.
M
AVG rate on them is anywhere from 1.5 to 2.87, wish these guys could pull that lol
Okay. Would you please go the address of one of your SP20s /monitor.php (ie 192.168.0.90/monitor.php) and PM me the output? Then I can see if the unit is reporting it wrong, or if my app is reading it wrong.
M
February 28, 2015, 06:34:07 PM
Got it, I'm a dummy, was over thinking what you were saying
EDIT:
Hmm Ms is showing my sp20s as running anywhere from 1.3TH to 2.8
I think the new update screwed something up
5s rate or avg? The 5s rate jumps all over the place.
I haven't touched the SP logic in quite a while.
M
AVG rate on them is anywhere from 1.5 to 2.87, wish these guys could pull that lol
February 28, 2015, 07:58:07 AM
Got it, I'm a dummy, was over thinking what you were saying
EDIT:
Hmm Ms is showing my sp20s as running anywhere from 1.3TH to 2.8
I think the new update screwed something up
5s rate or avg? The 5s rate jumps all over the place.
I haven't touched the SP logic in quite a while.
M
February 28, 2015, 12:25:08 AM
I have 6 SP20s here, could someone maybe give a refresher ont he best way to get M's to see them?
Do I simply need to ssh in and edit the file, than point m's to the IP and it will find it?
Thank You
Do I simply need to ssh in and edit the file, than point m's to the IP and it will find it?
Thank You
The easiest is to turn off the "use API" option for each one, and give it the web credentials (defaults to admin/admin) to use. Should "just work" from there.
M
Got it, I'm a dummy, was over thinking what you were saying
EDIT:
Hmm Ms is showing my sp20s as running anywhere from 1.3TH to 2.8
I think the new update screwed something up
February 27, 2015, 04:06:01 PM
Here's v5.1. It contains two minor changes/fixes:
- Fixed the problem with the selection column not being properly set on startup.
M
- Fixed the problem with the selection column not being properly set on startup.
M
Sweet!! Thanks dude.
Jump to: