As previously mentioned this miner looks dead. Anyway, any miner still using LHR is out of date and will have a performance penalty.
It's best to sitck with esatblished miners with obvious recent development. Watch out for scams such as new releases of existing miners
that have been dormant, posted by a newbie account. Trust only links posted by the OP. Also vet any new miners posted by newbies,
most are scams.
Topic: NBMiner v42.2, 100% LHR unlock for ETH mining ! (Read 54344 times)
Hello everyone! Does anyone know a working contact with NBminer developers or admins of their groups? No one has responded to any of the official contacts. No verification is confirmed on Discord. I am grateful in advance for any help in this matter 
Hello. Today I made a PR for with information about our mining pool. How long does it usually take to process requests? I see that there are very old requests and they are not closed.
Please devs add temperature target. I started loving nbminer it is stable and working good both amd and nvidia. Just please add temperature target.
This miner is dead. Why you use this? So many better miners out - with no inflated hashrate.
Please devs add temperature target. I started loving nbminer it is stable and working good both amd and nvidia. Just please add temperature target.
This miner is dead. Why you use this? So many better miners out - with no inflated hashrate.
Please devs add temperature target. I started loving nbminer it is stable and working good both amd and nvidia. Just please add temperature target.
Hi NBminer can you please add temperature target both amd and nvidia. I want set temp target exapmle target temp:@45,@50 something like that. If possible for available gpus memory target too.thanks for miner
Is there a way to disable LHR within miner?
Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Does it affect the hashrate?Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Usually these settings are automatic.
Yes it will. Defeating LHR requires running a dummy process on the GPU. Without LHR the dummy isn't needed but running it
will steal processing time from the miner process.
Edit: dual mining also serves to defeat LHR if one of the algos is immune. In this case there is no dummy so dual mining may not be
affected.
Is there a way to disable LHR within miner?
Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Does it affect the hashrate?Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Usually these settings are automatic.
Probably yes, because LHR is not 100% unlocked,
and hashrate is low compared to other miners.
Quote
Usually these settings are automatic.
Yes, and automatically applies some LHR modes which is unwanted that hurts the hashrate
Is there a way to disable LHR within miner?
Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Does it affect the hashrate?Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Usually these settings are automatic.
Is there a way to disable LHR within miner?
Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Because even with latest Nvidia drivers, miner still applies LHR mode automatically.
Hello,
Please tell me what could be the problem - I use a miner for Windows, an LHR video card, when I open the Evernote program, the hashrate drops (from 61 to 38 for 3060 ti and from 81 to 49 for 3070 ti.
Why does this happen and how can I fix it? Thanks.
NVIDIA has reportedly removed LHR from its newest driversPlease tell me what could be the problem - I use a miner for Windows, an LHR video card, when I open the Evernote program, the hashrate drops (from 61 to 38 for 3060 ti and from 81 to 49 for 3070 ti.
Why does this happen and how can I fix it? Thanks.
https://bitcointalksearch.org/topic/m.61118737
NVIDIA's Linux driver 520.56.06 & Windows driver 522.25 do not seem to trigger LHR when mining with traditionally locked algorithms like Etchash & Autolykos.
https://www.reddit.com/r/EtherMining/comments/y2l39i/nvidia_removes_lhr_limiter_from_newest_drivers/
etchash: Add support for NiceHash ETC pool.
https://nbminer.com/
https://github.com/NebuTech/NBMiner/releases/tag/v42.3
Check all links with this post from the developer.
Hello,
Please tell me what could be the problem - I use a miner for Windows, an LHR video card, when I open the Evernote program, the hashrate drops (from 61 to 38 for 3060 ti and from 81 to 49 for 3070 ti.
Why does this happen and how can I fix it? Thanks.
Please tell me what could be the problem - I use a miner for Windows, an LHR video card, when I open the Evernote program, the hashrate drops (from 61 to 38 for 3060 ti and from 81 to 49 for 3070 ti.
Why does this happen and how can I fix it? Thanks.
What is the right way to force nbminer to use backup mining pools? I tried this line, but it doesn't work:
I'm still getting this error:
ERROR - No share accepted in 30 minutes. Something is wrong, restart miner.
Code:
nbminer -a ethash -o pool -u name -o1 pool1 -u1 name1 -o2 pool2 -name2 -log
I'm still getting this error:
ERROR - No share accepted in 30 minutes. Something is wrong, restart miner.
Hi folks!
does anyone knows why if the power limit is configured, the consumption never comes to this value?
HIVEOS: 5.10.0-hiveos #83
GeForce RTX 3080 10240 MB · ZOTAC
Micron GDDR6X · 94.02.71.40.83 · PL 100 W, 320 W, 336 W
60.92 MH
178 W
Power limit
280
Thanks for your great help!!!
does anyone knows why if the power limit is configured, the consumption never comes to this value?
HIVEOS: 5.10.0-hiveos #83
GeForce RTX 3080 10240 MB · ZOTAC
Micron GDDR6X · 94.02.71.40.83 · PL 100 W, 320 W, 336 W
60.92 MH
178 W
Power limit
280
Thanks for your great help!!!
#### v42.1(2022-05-24)
- `fix`: `ethash` Linux LHR unlocker can not unlock on certain GPUs.
#### v42.0(2022-05-23)
- `feature`: `ethash` Extend LHR unlocker work with old driver versions. All previous drivers should work until `515.x`.
- `fix`: `ethash` Improve LHR unlocker stability under Linux.
- `optimize`: `ethash` small hashrate improvement on Nvidia GPUs.
- `feature`: Add `GDDR6X` memory temp in summary table for Linux.
- `feature`: Add `GPU RAM type` and `GPU RAM vendor` in log.
- `feature`: Add Nvidia driver versoin in summary table.
- `feature`: If `Overclock` applies through `nbminer`, reset settings to stock when miner exit.
- `feature`: `-mt` option on windows does not require custom driver anymore (admin priviledge is required).
- **`NOTE`: NBMiner versions older than v39.5 (not included) will run into issue when ETH reaches `EPOCH 520` (Approx mid September). Please make sure to upgrade to a newer version before that if ETH is still with POW.**
- `fix`: `ethash` Linux LHR unlocker can not unlock on certain GPUs.
#### v42.0(2022-05-23)
- `feature`: `ethash` Extend LHR unlocker work with old driver versions. All previous drivers should work until `515.x`.
- `fix`: `ethash` Improve LHR unlocker stability under Linux.
- `optimize`: `ethash` small hashrate improvement on Nvidia GPUs.
- `feature`: Add `GDDR6X` memory temp in summary table for Linux.
- `feature`: Add `GPU RAM type` and `GPU RAM vendor` in log.
- `feature`: Add Nvidia driver versoin in summary table.
- `feature`: If `Overclock` applies through `nbminer`, reset settings to stock when miner exit.
- `feature`: `-mt` option on windows does not require custom driver anymore (admin priviledge is required).
- **`NOTE`: NBMiner versions older than v39.5 (not included) will run into issue when ETH reaches `EPOCH 520` (Approx mid September). Please make sure to upgrade to a newer version before that if ETH is still with POW.**
On my all LHR rig, I can lock the core on each GPU by passing the following parameters:
--cclock @1350,@1200,@1200,@1400,@1200,@1350,@1200
It has the following GPUs:
0 3070Ti
1 3080Ti
2 3080Ti
3 3060Ti
4 3080
5 3070Ti
6 3080Ti
However, I also have a rig with a mix of 1000, 2000 and 3000 cards as follows:
0 1070Ti
1 3060
2 1070Ti
3 2080Ti
4 3080Ti
I want to lock the core on GPU 4 @1200. How do I do that since some of the other GPUs don't support core lock?
EDIT:
Like this:
--cclock ,,,,@1200
--cclock @1350,@1200,@1200,@1400,@1200,@1350,@1200
It has the following GPUs:
0 3070Ti
1 3080Ti
2 3080Ti
3 3060Ti
4 3080
5 3070Ti
6 3080Ti
However, I also have a rig with a mix of 1000, 2000 and 3000 cards as follows:
0 1070Ti
1 3060
2 1070Ti
3 2080Ti
4 3080Ti
I want to lock the core on GPU 4 @1200. How do I do that since some of the other GPUs don't support core lock?
EDIT:
Like this:
--cclock ,,,,@1200
I have a similar issue with my RTX 3060 12GB rig on v41.4 & v41.5, where all nine cards will mine at 47 Mh @ 110w for a few hours. But then, one of them will drop to 16-17 Mh @ 110w until I reboot the rig. Restarting NBMiner doesn't work. At least Minerstat supports auto-rebooting when the hashrate drops.
I have confirmed this isn't a memory clock or stability issue with the hardware itself. It happens even when mem clock is +0 MHz. The underlying OS is Ubuntu 18.04.5 LTS while the driver is 510.60.02
I have confirmed this isn't a memory clock or stability issue with the hardware itself. It happens even when mem clock is +0 MHz. The underlying OS is Ubuntu 18.04.5 LTS while the driver is 510.60.02
happens in windows also a few times for me. only reboot fixes it.
I have a similar issue with my RTX 3060 12GB rig on v41.4 & v41.5, where all nine cards will mine at 47 Mh @ 110w for a few hours. But then, one of them will drop to 16-17 Mh @ 110w until I reboot the rig. Restarting NBMiner doesn't work. At least Minerstat supports auto-rebooting when the hashrate drops.
I have confirmed this isn't a memory clock or stability issue with the hardware itself. It happens even when mem clock is +0 MHz. The underlying OS is Ubuntu 18.04.5 LTS while the driver is 510.60.02
I have confirmed this isn't a memory clock or stability issue with the hardware itself. It happens even when mem clock is +0 MHz. The underlying OS is Ubuntu 18.04.5 LTS while the driver is 510.60.02
hi im having probs with my 3070ti,s all works but then randomly a card will just stop even though they worked great with other versions, what drivers should i use latest or what cheers.
Jump to: