Topic: NBMiner v42.2, 100% LHR unlock for ETH mining ! - page 4. (Read 54351 times)

Look at the first page. It states there which coins they support. Developers will only add new coins when they can or will be able to add them.

Can you please post a .bat file in a reply to this comment(for 3070 LHR)

hi does nbminer support cortex cukoo cycle if so how do i run that in config cheers , if not can you add it please many thanks.

I've been mining on Windows 10 since NBminer v 39.5 and I've had this problem with every version.
The program just stops mining and restarts from the loop command in the batch file.
Any idea what is causing this? It happens randomly. Sometimes it takes 30 minutes and sometimes2 minutes like below. Sometimes I've gotten up to 7 shares and it stops.

[22:27:23] INFO - ethash - New job: eth.2miners.com:2020, ID: e26bea0c, HEIGHT: 13687392, DIFF: 8.726G
[22:27:26] INFO - ===================== [nbminer v40.1] Summary 2021-11-25 22:27:26 =====================
[22:27:26] INFO - |ID|Device|Hashrate|LHR|Accept|Reject|Inv|Powr|CTmp|MTmp|Fan|CClk|GMClk|MUtl|Eff/Watt|
[22:27:26] INFO - | 0|  1060| 20.20 M |     0|     0|  0|  93|  53|    | 78|1936| 3999| 100| 217.2 K|
[22:27:26] INFO - |------------------+----+------+------+---+----+--------------------------------------|
[22:27:26] INFO - |    Total: 20.20 M|  |     0|     0|  0|  93| Uptime:  0D 00:02:00        CPU: 10% |
[22:27:26] INFO - =======================================================================================
[22:27:26] INFO - ethash - On Pool   10m:  0.000    4h:  0.000    24h:  0.000
[22:27:30] INFO - ethash - New job: eth.2miners.com:2020, ID: a5caec1a, HEIGHT: 13687392, DIFF: 8.726G
[22:27:30] INFO - ethash - New job: eth.2miners.com:2020, ID: 55b852bd, HEIGHT: 13687392, DIFF: 8.726G
[22:27:36] INFO - ethash - New job: eth.2miners.com:2020, ID: 05a89ba3, HEIGHT: 13687393, DIFF: 8.726G
[22:27:36] INFO - ethash - New job: eth.2miners.com:2020, ID: fd0ebaa7, HEIGHT: 13687393, DIFF: 8.726G
[22:27:43] INFO - ethash - New job: eth.2miners.com:2020, ID: f4fc0522, HEIGHT: 13687393, DIFF: 8.726G

C:\WINDOWS\system32>goto loop

C:\WINDOWS\system32>"C:\Program Files\Miners\NBMiner\nbminer.exe" -a ethash -o stratum+tcp://eth.2miners.com:2020 -u nano_1xfay41n8zf33h8t7ymxep8f19196rwea7wt5k8khzfpzj6hsndzpiri5us5.Tim1GPU
[22:28:06] INFO - ----------------------------------------------
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |                                            |
[22:28:06] INFO - |         NBMiner - Crypto GPU Miner         |
[22:28:06] INFO - |                    40.1                    |

btw is nebutech working on further improving LHR unlock? Is there a theoretical limit or do you target 100%?
Thank you.

Solved. Thank you.

fixed in 40.1

Same here .

New version is crashing always for me after DAG verification, 39.7 is still working fine

i use nbminer all the time but this new version just crashes and crashes and crashes , worst version yet 3.7 is iffy seems newer the version worse it gets sort it out will you , is it because my cards are on 4 into one splitters or something everything works great ish in 3.7 not your new one.

new version updated

Cheers! Will check it out

I think it is possible with lolMiner afaik.

Question about NBMiner: I have a rig with 10 GPUs, currently running in LHR Mode 2 (Low Power Mode), as I have a couple of cards which run a bit on the hot side. However, I am missing out on hashrate as the other cards could be running in LHR Mode 1. Is there a way to set a custom LHR Mode for each card? Or somehow split the cards out into two groups in HiveOS?

Thanks it works .

If you have a Windows Rig go to Settings then System on the Display tab go down to Graphics settings, turn Hardware-accelerated GPU scheduling off.
Restart your pc, and CPU usage should be right down now.

---

Using NBMiner v39.7 on one of my 6x3060 V2 lhr rigs.

Getting 36.26MH/s to 36.80MH/s on all 6 3060 cards. miner says power draw of 706w but I would assume its around 850w-900w at the wall.
Total Hash rate of NBMiner for 6 cards is 219MH/s and the Pool hash rate for the last 4 hours is 226MH/s, I'm quite impressed!
 
Overclock setting on all 6 are 70% power, -502 core, +1300 mem, fan speed 90% (summer time)
core temps are 45c,45c,42c,55c,46c,40c and memory junction temps are 58c,59c,54c,67c,56c,55c.

If anyone has any tips to push them a little further, I'm keen to test it out!
   

[moderator's note: consecutive posts merged]

im facing with cpu usage %100 when mining nbminer

I have never seen this before . i have six cards in rig

CPU: Ryzen 3 1200
RAM : 4 GB DDR4

someone got idea to fix it?

https://i.hizliresim.com/aktszoq.png

no one is answering,  the Telegram group is all Chinese and no answer
can we set  DEV Fee in NBminer to 0.65 instead of 1?
does it have to be full integer or can it be also partial?


Also the BotFarm here is updated to support NBminer   https://bitcointalksearch.org/topic/cmd-farmwatchbot-ewbf-claymore-bminer-dstm-cc-eth-castxmr-phoenix-2071108

check it out, very handy to set the afterburner and make sure all is working

How can I see the Dev fees taken?

I tried log verbose and I could not find any other worker or wallet reported but mine,
how does NBminer take dev fees?

When FLUX?