Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 104. (Read 289464 times)

9 euro is good with one ti... it won't get better than that

i'm doing ~22 euro with 1x 1080 ti and 2x 1080

Right now im doing fast (24h) test between ahashpool and miningpoolhub with my 6x1060 6gb rig. Miningpoolhub is great because i can set payout threshold and payout coin, BUT it looks like its profit is really really bad. I have to wait for all coins to be exchanged to see final result, but i think ahashpool is still the best. Maybe i should count btc fee vs ltc fee as these coins are my payouts and lower profits with ltc could be better than higher with btc, but im not sure how to calculate it to be correct.

Are this values for the 12 cards? or one 6x 1070 TI rig?

I have a 6 x 1080 TI and almost all the hashrate is half or less than yours... Do I need to review the configuration or sell them all for 1070 TI.... Even if it's the 12 cards it seems way more efficient $/hash than the 1080 TI

Miner                Algorithm        Speed BTC/Day USD/Day BTC/GH/Day Pool
-----                ---------        ----- ------- ------- ---------- ----
ccminerAlexis78      X17         34,99 MH/s 0,00188  25,198    0,05379 ahashpool24hr-
ccminerAlexis78      Nist5      142,49 MH/s 0,00180  24,077    0,01262 ahashpool24hr-
ccminerAlexis78      Skein        1,70 GH/s 0,00153  20,528    0,00090 ahashpool24hr-
CcminerKlaust        NeoScrypt    2,70 MH/s 0,00133  17,862    0,49379 ahashpool24hr-
CcminerTpruvot       Bitcore     44,78 MH/s 0,00125  16,669    0,02780 ahashpool24hr-
CcminerTpruvot       Skunk       88,71 MH/s 0,00113  15,156    0,01276 ahashpool24hr-
ccminerAlexis78      Sib         35,76 MH/s 0,00100  13,453    0,02810 ahashpool24hr-
ccminerAlexis78      Blake2s     11,57 GH/s 0,00097  13,034    0,00008 ahashpool24hr-
CcminerAlexis78cuda9 Xevan       10,21 MH/s 0,00090  11,990    0,08771 ahashpool24hr-
CcminerTpruvotcuda9  Tribus     163,16 MH/s 0,00082  10,988    0,00503 ahashpool24hr-
ccminerAlexis78      C11         41,95 MH/s 0,00075  10,026    0,01785 ahashpool24hr-
ccminerAlexis78      Hsr         31,81 MH/s 0,00072   9,706    0,02279 ahashpool24hr-
CcminerTpruvotcuda9  Timetravel  72,44 MH/s 0,00067   8,991    0,00927 ahashpool24hr-
ccminerAlexis78      Lyra2RE2   123,18 MH/s 0,00062   8,263    0,00501 ahashpool24hr-

 Very Interesting.   One other piece I've slowly been integrating into my mining is power consumption.   I have a Killawatt hooked up and have started noting wattage per algo.   Have found some use around 8-10 percent more power,  so i edit the hashrates manually accordingly to compensate.   Probably over thinking it...i do appreciate your testing and am curious to see what else you discover.

I've also played with tweaking hashrates to account for how fast an algo gets to full hash.  I dropped the slower ones hashrates slightly.   I think the longer the interval the less this plays a roll.

900 Interval after benchmark.
I've removed a few algos that never seem to pan out

   Type: NVIDIA

Miner                Algorithm       Speed BTC/Day USD/Day BTC/GH/Day Pool
-----                ---------       ----- ------- ------- ---------- ----
CcminerTpruvotcuda9  Phi       126.32 MH/s 0.00556  73.796    0.04400 ahashpool-
ccminerAlexis78      Skein       3.61 GH/s 0.00473  62.742    0.00131 ahashpool-
ccminerAlexis78      X17        72.18 MH/s 0.00354  46.972    0.04901 ahashpool-
CcminerTpruvot       Bitcore   103.94 MH/s 0.00323  42.835    0.03104 ahashpool-
ccminerAlexis78      Sib        83.14 MH/s 0.00317  42.090    0.03813 ahashpool-
CcminerTpruvot       Skunk     201.45 MH/s 0.00296  39.239    0.01467 ahashpool-
ccminerAlexis78      Nist5     315.14 MH/s 0.00281  37.282    0.00891 ahashpool-
CcminerKlaust        NeoScrypt   6.59 MH/s 0.00274  36.366    0.41587 ahashpool-
CcminerAlexis78cuda9 Xevan      20.98 MH/s 0.00273  36.307    0.13033 ahashpool-
ccminerAlexis78      Blake2s    26.84 GH/s 0.00222  29.521    0.00008 ahashpool-
ccminerAlexis78      Lyra2RE2  268.44 MH/s 0.00213  28.336    0.00795 ahashpool-
ccminerAlexis78      C11        96.38 MH/s 0.00158  20.948    0.01637 ahashpool-
CcminerTpruvot       Lbry        1.89 GH/s 0.00127  16.829    0.00067 ahashpool-
ccminerAlexis78      Hsr        80.81 MH/s 0.00113  15.063    0.01404 ahashpool-
CcminerTpruvotcuda9  Tribus    381.33 MH/s 0.00080  10.582    0.00209 ahashpool-

Pls do HR vs Ahash too

Very interesting.   So, are you using all algos in your "non 24" config?  And what interval are you using?

Thanks for doing this!

Very much appreciated.
I have been mining X17 for the past three weeks on ahash, since it was constantly top earner according to calculations done by Awesome Miner .
Do not ask me about actual income, too lazy/stupid to do that kind of calculations.
I just hope ahash is not inflating their "24hours actual" profits in order to lure unsuspecting miners to their pool

ahashpool vs ahashpool24 - COMPARISON

Ok I've concluded my test after 17.5 days, two identical rigs (6x1070ti) with MSI power 77%/+100GPU/+500MEM
17.5 day test (btc 13540) - 6x1070ti - 900 interval

Miner1 = $39.15/day (ahashpool)
Miner2 = $37.23/day (ahashpool24hr)


It seems in the end, 24hr script isn't the most profitable, at least not in this 17.5 day period (12/27 to 1/14)

I've now started up a new comparison!

Miner1 - AHASHPOOL
Miner2 - ZPOOL


We'll see who is the winner.......

Is it possible to use Suprnova and change the different coins ?
So I use Equihash algo and it only changes the coin ZEC, ZEN, ZCL .........

There is a way: (but requires some changes in program flow)

Hello please every time is giving this message, and it seems that the pool stops working. I made some changes to ahashpool.ps1 but error continues. I use windows 10. Can anyone give me a help?
https://image.prntscr.com/image/Tywv_6oVRpqoJhAUT5vdCA.png
https://prnt.sc/i037f2VAMOS

I thought  that windows 10 can support only 8 gpu or u are talking about linux version?
Anyone knows how many gpu can support asus z270- in windows 10  now it has 8gpu and one free of 2  m.2 socket?

its a problem with the wrapper script
if u go into wrapper.ps1 go to the bottom and remove $Id from both Wrapper_$Id.txt
so they both read Wrapper_.txt
worked for me after that

at least for me nemos was looking for Wrapper_.txt and wasnt looking for anything with an ID

or...
u can also go into stats and manually enter ur hashrate into the benchmark txt

Please do not write nonsense, i did a weekly comparison on different pools on the same algorithms, if the client promises 0,002, but in the end it turns out in 2 times less, it is better to use the pool, which promises and pays 0,0015. Or if you are a pool owner, or other interested person?

Is it possible to use
-SelGPUDSTM '' -SelGPUCC ''

e.g. "use whatever cards are available"?

atm it seems if I omit "0,1,2....." the miner will start using only GPU 0

You are right. New miners usually don't understand that. It _is_ an estimate.

We need more info - how many GPU? Paste your starting .bat content

Here everything is simple, if I knew that another pool would pay more, with lower values in NemosMiner, i would only use it, but no, this pool shows large values, and in the end I get ~ 50% less. Understand, this is our money with you and I do not want to just throw it away.

I'm trying to use nemosminer to mine neoscrypt only on miningpoolhub. I have 4 gtx 1080 and I'm only getting a total of 4mh. Each one roughly 1kh during mining. Is there something I'm missing?