[NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 105.

Tinouti

newbie

Activity: 10

Merit: 0

Quote from: ste1 on January 13, 2018, 03:16:25 PM

Can't connect to zpool.

Can you give us a bit more ? Maybe an error message ?

If it's :

Quote

Error contacting pool, retrying...

I have the same problem. That's an issue in zpool API limiting the number of requests per IP, so until they change that, we're in a dead end.

Just use another pool, like ahashpool (which seems to have higher profits anyway). Wink

matheusbarbara

newbie

Activity: 1

Merit: 0

start or start GPU application waiting for data and automatically closes someone could help me
4 1060 6 gb
2gb ram memory
hd 160 gb

primo1983

newbie

Activity: 72

Merit: 0

Hello please every time is giving this message, and it seems that the pool stops working. I made some changes to ahashpool.ps1 but error continues. I use windows 10. Can anyone give me a help?
https://image.prntscr.com/image/Tywv_6oVRpqoJhAUT5vdCA.png
https://prnt.sc/i037f2VAMOS

Tinouti

newbie

Activity: 10

Merit: 0

Quote from: Max3k on January 13, 2018, 10:18:54 AM

Quote from: ALTCOlNMlNER on January 10, 2018, 04:28:32 AM

Can anyone of you tell me, why nemosminer shows me much much more BTC/Day then I really get? For example: The miner shows 44,604 USD/Day at moment and in the last 24h it was around 46 USD/Day. But on ahashpool, I have an income of only 32 USD for the last 24h. Is the calculation that worse or is ahashpool a scam-pool or what is going on? Anything that I dont understand?

It seems that someone is cheating us, i have a suspicion that pool specially overstates the value of profit, in order to clients (NemosMiner or MPM) only on it and remained.
All week Nemos on X17 promises 0,0015-0,002 and in fact I get no more than 0.001. Recently I was comparing with other pool, on it there were almost no discrepancies (5 days/24hr). Well there can not be such, Either there is a mistake in calculating income, too much of a difference.

Keep in mind that profits NemosMiner is displaying are estimations based on the last 24h.
So by the time you mine the coin, find a block and exchange it for BTC, that number will have changed a lot. Add to that the miner donation, the pool fees and the exchange fees, and you have your final profil, which is obviously going to be way lower. Wink

ste1

newbie

Activity: 36

Merit: 0

Can't connect to zpool.

skorpe

newbie

Activity: 6

Merit: 0

I have been using nemosminer+MPH on my 4 card 1070ti rig for about two weeks, and it has been running flawless. I had a 970 laying around, so I figured why not pop the fifth card in to mine a bit more until I buy more 1070s. I am using a 1000w PSU, which I monitored with a watt meter at the wall, and reduced the TDP to keep the pull to 800w.

I updated the bat file to add the new GPU for DSTM and CC miner and reset the benchmarks to get everything updated. Here is where the problems start.

- Nemosminer is updating the pools stats and opening a miner when it is first opened, but then does not refresh again even though the interval is still 120. As a result it doesnt benchmark or profit switch.
- DSTM opens but is just a black screen, while all of the cc algos open, detect and mine properly, just no switch.
- after updating the bat file again to just go back to the gpu that were working properly, the above two problems persist.

I gave up last night and am now remote so I can't try disconnecting the new card physically until later today, however this seems like a software issue I am having not hardware... any thoughts?

Max3k

newbie

Activity: 79

Merit: 0

Quote from: ALTCOlNMlNER on January 10, 2018, 04:28:32 AM

Can anyone of you tell me, why nemosminer shows me much much more BTC/Day then I really get? For example: The miner shows 44,604 USD/Day at moment and in the last 24h it was around 46 USD/Day. But on ahashpool, I have an income of only 32 USD for the last 24h. Is the calculation that worse or is ahashpool a scam-pool or what is going on? Anything that I dont understand?

It seems that someone is cheating us, i have a suspicion that pool specially overstates the value of profit, in order to clients (NemosMiner or MPM) only on it and remained.
All week Nemos on X17 promises 0,0015-0,002 and in fact I get no more than 0.001. Recently I was comparing with other pool, on it there were almost no discrepancies (5 days/24hr). Well there can not be such, Either there is a mistake in calculating income, too much of a difference.

ravenj

newbie

Activity: 41

Merit: 0

no errors on the log

Saponetta

newbie

Activity: 28

Merit: 0

Quote from: ravenj on January 13, 2018, 08:32:06 AM

Quote from: squashen on January 13, 2018, 07:49:54 AM

Quote from: ravenj on January 13, 2018, 07:00:50 AM

Quote from: nils8107 on January 12, 2018, 05:12:41 PM

I`m facing problems. Like the PalginHSR miner is Benchmarking for ever. Using newest version...

6X1080Ti 70GB Virtual Memory. Win10 X64 Pro latest updates and drivers installed.

Same here....benchmark PalginHSR doesn't stop.

Does the miner showed anything in the miner windows? When i benched it only got me a blue shell and nothing else. After i while i hit the "enter" key and the miner started to bench.

I didn't need to hit enter...it started correctly. However it didn't stop as it should. I killed the process and started again and it didn't benchmarked (the result was 0), it jumped to the next algo.

Check if you have the same error I do (posted a few msgs back)
You can see the error in the log files.

ravenj

newbie

Activity: 41

Merit: 0

Quote from: squashen on January 13, 2018, 07:49:54 AM

Quote from: ravenj on January 13, 2018, 07:00:50 AM

Quote from: nils8107 on January 12, 2018, 05:12:41 PM

I`m facing problems. Like the PalginHSR miner is Benchmarking for ever. Using newest version...

6X1080Ti 70GB Virtual Memory. Win10 X64 Pro latest updates and drivers installed.

Same here....benchmark PalginHSR doesn't stop.

Does the miner showed anything in the miner windows? When i benched it only got me a blue shell and nothing else. After i while i hit the "enter" key and the miner started to bench.

I didn't need to hit enter...it started correctly. However it didn't stop as it should. I killed the process and started again and it didn't benchmarked (the result was 0), it jumped to the next algo.

squashen

member

Activity: 61

Merit: 10

Quote from: ravenj on January 13, 2018, 07:00:50 AM

Quote from: nils8107 on January 12, 2018, 05:12:41 PM

I`m facing problems. Like the PalginHSR miner is Benchmarking for ever. Using newest version...

6X1080Ti 70GB Virtual Memory. Win10 X64 Pro latest updates and drivers installed.

Same here....benchmark PalginHSR doesn't stop.

Does the miner showed anything in the miner windows? When i benched it only got me a blue shell and nothing else. After i while i hit the "enter" key and the miner started to bench.

ravenj

newbie

Activity: 41

Merit: 0

Quote from: nils8107 on January 12, 2018, 05:12:41 PM

I`m facing problems. Like the PalginHSR miner is Benchmarking for ever. Using newest version...

6X1080Ti 70GB Virtual Memory. Win10 X64 Pro latest updates and drivers installed.

Same here....benchmark PalginHSR doesn't stop.

primo1983

newbie

Activity: 72

Merit: 0

These values that the NenosMiner shows I am suspicious that is not correct as I only have 3 GTX and it shows 62 U $ is correct it? Does it seem a lot above almost U $ 20 per gpu?
https://prnt.sc/hzuhy0

zorday

newbie

Activity: 19

Merit: 0

Quote from: ?? on ??

Hi everyone,

Been using Nemos miner for a while now and I think it's great, currently I'm using Zpool and would like to try ahashpool but I'm getting connection errors? I'm using the latest 2.3c build....and I'm not sure what's the issue.

Do I have to makes changes to the ahashpool ps1 file to get this to connect?

Everytime i start the ahashpool.bat file on any algo i get similar errors to this:

NVAPI GPU monitoring enabled.
1 miner thread started, using 'x17' algorithm.
...retry after 30 seconds
API bind to port 4068 failed - using port 4069
...retry after 30 seconds
...retry after 30 seconds
...retry after 30 seconds
...retry after 30 seconds
...retry after 30 seconds

this happens continuously and I've never been able to connect.

Can anyone shed any light on this?

Thanks!

Could be a firewall problem. Make sure that you can connect outwards on that port (4068 and 4069 it seems).

kopija

sr. member

Activity: 308

Merit: 250

Quote from: BitBustah on January 12, 2018, 12:59:16 AM

Quote from: Tinouti on January 11, 2018, 04:47:37 PM

Yep, when sharing code, it's usually best not to use the shorthand version because it need a particular configuration. See php doc :

Clean UI though !

Yeah I know. Hobby project. :p

@Bitbustah
could you please add normalizations/hashrates for Nvidia GPUs so we can use your stupid woman like we do with whattomine?

kopija

sr. member

Activity: 308

Merit: 250

Quote from: primo1983 on January 12, 2018, 05:50:33 PM

Anyone facing this problem? I'm about to leave Less Miner I see many problems and locking all the time
I have 4 GTX 1080 TI, anyone help?

https://www.raymond.cc/blog/disable-program-has-stopped-working-error-dialog-in-windows-server-2008/
just downlad zip file, the most elegant solution

millsys

member

Activity: 112

Merit: 10

Quote from: primo1983 on January 12, 2018, 05:50:33 PM

Anyone facing this problem? I'm about to leave Less Miner I see many problems and locking all the time
I have 4 GTX 1080 TI, anyone help?

modify Ccmineralexis78.ps1
"sib" = " -i 19 -d $SelGPUCC" #Sib
"x17" = " -i 19 -d $SelGPUCC" #X17
"c11" = " -i 19 -d $SelGPUCC" #C11
modify CcminerKlaust.ps1
"neoscrypt" = " -i 15 -d $SelGPUCC" #NeoScrypt

Then set MSI Afterburner for 80% power, +100 cpu, +500 mem.

Now run Nemosminer

primo1983

newbie

Activity: 72

Merit: 0

Anyone facing this problem? I'm about to leave Less Miner I see many problems and locking all the time
I have 4 GTX 1080 TI, anyone help?
https://image.prntscr.com/image/5LtL92b5RryKDdhcqgCDqg.jpg

nils8107

newbie

Activity: 22

Merit: 0

I`m facing problems. Like the PalginHSR miner is Benchmarking for ever. Using newest version...

6X1080Ti 70GB Virtual Memory. Win10 X64 Pro latest updates and drivers installed.

Saponetta

newbie

Activity: 28

Merit: 0

I can't seem to finish the benchmark for PalginHSR, is it me doing something wrong or a bug in the latest 2.3.

here is the log

Code:

Get-Content : Cannot find path 'D:\NemosMiner-v2.3-master\Wrapper_.txt' because it does not exist.
At D:\NemosMiner-v2.3-master\Include.ps1:426 char:33
+ $HashRate = Get-Content ".\Wrapper_$Id.txt"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (D:\NemosMiner-v2.3-master\Wrapper_.txt:String) [Get-Content],
ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetContentCommand
Get-Content : Cannot find path 'D:\NemosMiner-v2.3-master\Wrapper_.txt' because it does not exist.
At D:\NemosMiner-v2.3-master\Include.ps1:426 char:33
+ $HashRate = Get-Content ".\Wrapper_$Id.txt"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (D:\NemosMiner-v2.3-master\Wrapper_.txt:String) [Get-Content], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetContentCommand

Get-Content : Cannot find path 'D:\NemosMiner-v2.3-master\Wrapper_.txt' because it does not exist.
At D:\NemosMiner-v2.3-master\Include.ps1:428 char:82
+ ... {Start-Sleep $Interval; $HashRate = Get-Content ".\Wrapper_$Id.txt"}
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (D:\NemosMiner-v2.3-master\Wrapper_.txt:String) [Get-Content],
ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetContentCommand
Get-Content : Cannot find path 'D:\NemosMiner-v2.3-master\Wrapper_.txt' because it does not exist.
At D:\NemosMiner-v2.3-master\Include.ps1:428 char:82
+ ... {Start-Sleep $Interval; $HashRate = Get-Content ".\Wrapper_$Id.txt"}
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (D:\NemosMiner-v2.3-master\Wrapper_.txt:String) [Get-Content], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetContentCommand

Thank you.

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 105. (Read 289464 times)