[NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 158.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: crackfoo on November 08, 2017, 10:51:49 PM

Novacoin's API seems to be down causing problem with my exchanging so I've disabled it until I get a response from their support.

This will affect all coins that are only listed on nova and not the other exchanges I support (bittrex, polo, yobit, ccex, live, bleu & cryptopia) their values will drop to 0.

Should really only affect the hmq1725 algo as all the coins on that algo are only on nova so I'd recommend to stop mining that algo untill it's re-enabled as you won't earn credits.

The other coins are on algos that have coins on other exchanges so mining will simply go to those coins.

Cheers

no solution/reply yet from Nova and their API still reports error:

nova: getbalances failed (500)
500 Internal Server Error
500 Internal Server Error
nginx

So looks like I'll just have to start dropping their coins from the pool. This mean algos hmq1725 and jha will be dropped and about 15 other coins or so.

As the main page of the pool mentions "It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur." this is exactly the type of situation miners would avoid you were mining using a BTC address.

Payouts in the dropped coins won't be entertained.

beinadvance

newbie

Activity: 6

Merit: 0

Can I add algorithms to the MiningPoolHub?

jebidia

jr. member

Activity: 161

Merit: 1

Hi Nemo,

Is it possible to manually set a fixed difficulty on a specific algo?

I tried to add a d=.064 into the algo below but it didn't seem to have an effect...the algo still starts at .008

"x17" = " -i 21 d=.064 -d $SelGPUCC" #X17

is there a way to do this?

cmbconcretefire

newbie

Activity: 54

Merit: 0

Quote from: minerx117 on November 08, 2017, 06:33:13 PM

Quote from: cmbconcretefire on November 08, 2017, 06:26:38 PM

Hello Nemo. I'm now trying out your zpool miner (v2.2) and I am having an issue. Essentially, the setup process is smooth. Everything downloads with no errors or anything. I edited the 'startzpool.bat' to what I will post below, and it starts up and goes through the benchmarking fine but after the benchmarking it says: Status Failed.

Also, check out the EWBF Equihash benchmark. I'm pretty sure ...... well what's up with that 466 number? Lol.

My bat file:
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.2.ps1 -SelGPUEWBF '0 1 2 3 4 5' -SelGPUCC '0,1,2,3,4,5' -Currency USD -Passwordcurrency BTC -interval 120 -Wallet 38mAZJC36XtwPn1w7mBLTWzZC3DpBkfJ3e -Location US -PoolName zpool -Type nvidia -Algorithm hsr,phi,keccak,xevan,veltor,lyra2z,skunk,jha,tribus,c11,x11evo,lbry,skein,equihash,groestl,timetravel,sib,bitcore,hmq1725,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s -Donate 5

And a screenshot. Please help. Lol. Thanks.
https://imgur.com/a/FgCfa

checked your screen shot... my guess is you haven't read Instructions Properly...

Increase Virtual Memory 64gb is optimal... - (Sib needs it) Sib is one of the only Algo's that Actually uses all of that 64gb Sib will not run if you do not increase it....

EWBF is perfect... its say's 466 BTC/GH/DAY... so if you have 1 ghs of equihash you would be getting 466 btc per day... very simple

Regards
Nemo

Nemo, may I ask if my bat file looks good to you? Yes sir, I understand the directions say to increase VM to 64gb, however that is not an option for me as my SSD hard drive is only 60 GB in size. Since you didn't know that, and I wasn't aware Sib needs it - as you explained, is it possible that I could just remove sib from the algo list? Please note, I have increased the VM on both my rigs as large as I possibly could. When I used custom settings for my VM size, I set it to 6000 MB minimum, and 29000 MB Maximum. I have been using those settings from day 1 and have mined various coins, one at a time, and also used Nicehash miner and now I'm experimenting with your miner.

I was unaware Sib needs that all that space. So if my bat file looks good to you, then I suppose I will have to go without mining Sib coin. What other algo's do you expect me to run into trouble with? Thank you for the information.

insaniak

full member

Activity: 137

Merit: 100

I am using 64 GB VIrtual Memory and also I havnt gotten that error again, but my rig is freezing and am unable to access it by teamviewer and have to restart the rig. Do you have MSI after burner installed or teamviewer? maybe those are causing conflicting issues? Not sure why it would work for you but not for me with the same GPUS.

cryptolelefla

member

Activity: 121

Merit: 10

Quote from: minerx117 on November 09, 2017, 04:00:33 PM

Quote from: cryptolelefla on November 09, 2017, 01:03:37 PM

Quote from: cryptolelefla on October 27, 2017, 04:14:31 PM

possible to run 2 instances? how many gb virtual memory do i need?

i asked if it was possible just here. Mining 2 sessions because using two different wallets.

sorry i haven't tested running 2 instances? so can't guarantee it will work... if you really want to tho... (try to download v2.2 twice or copy the whole folder and run say cards 0 1 2 from bat file in first v2.2 folder / and other cards 3 4 5 from another bat file from the other v2.2 folder you copied... don't try run two bat files out of same program/folder....)

i only run 1 per rig...

Regards
Nemo

thank you i'm just giving feedback to improve your nice software
is exactly what i did, i run two sessions from different folders.. btw profitability calculation will takes info from api at miner port 4068.....
in the second session i change the port in miner sp1 file...
but seems to have no effect in miner windows...
maybe port switch is not passed to the miner?
i'm not dev so i can't find where script append switches to miner config
thank you

D3legacy

full member

Activity: 178

Merit: 100

i ran 2 instances several weeks ago for about 24hours.
It seemed to my that it works properly the paypout was the same and nothing screwed up so far during that testsession.
So no guarante but it seems to work

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: cryptolelefla on November 09, 2017, 01:03:37 PM

Quote from: cryptolelefla on October 27, 2017, 04:14:31 PM

possible to run 2 instances? how many gb virtual memory do i need?

i asked if it was possible just here. Mining 2 sessions because using two different wallets.

sorry i haven't tested running 2 instances? so can't guarantee it will work... if you really want to tho... (try to download v2.2 twice or copy the whole folder and run say cards 0 1 2 from bat file in first v2.2 folder / and other cards 3 4 5 from another bat file from the other v2.2 folder you copied... don't try run two bat files out of same program/folder....)

i only run 1 per rig...

Regards
Nemo

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: jebidia on November 09, 2017, 10:43:06 AM

Hi Nemo,

I found 2 versions of 2.2 online, one marked "Master" - I'm assuming this is the latest recommend? The other has a few more miners in it....

thanks,

jb

master is the latest:

https://github.com/nemosminer/NemosMiner-v2.2/archive/master.zip

Regards Nemo

cryptolelefla

member

Activity: 121

Merit: 10

Quote from: minerx117 on October 27, 2017, 05:15:13 PM

Quote from: cryptolelefla on October 27, 2017, 04:14:31 PM

possible to run 2 instances? how many gb virtual memory do i need?

running multiple cards its recommended to increase Virtual Memory 32gb-64gb is optimal

i asked if it was possible just here. Mining 2 sessions because using two different wallets.

jebidia

jr. member

Activity: 161

Merit: 1

Hi Nemo,

I found 2 versions of 2.2 online, one marked "Master" - I'm assuming this is the latest recommend? The other has a few more miners in it....

thanks,

jb

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: cmbconcretefire on November 08, 2017, 06:26:38 PM

Hello Nemo. I'm now trying out your zpool miner (v2.2) and I am having an issue. Essentially, the setup process is smooth. Everything downloads with no errors or anything. I edited the 'startzpool.bat' to what I will post below, and it starts up and goes through the benchmarking fine but after the benchmarking it says: Status Failed.

Also, check out the EWBF Equihash benchmark. I'm pretty sure ...... well what's up with that 466 number? Lol.

My bat file:
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.2.ps1 -SelGPUEWBF '0 1 2 3 4 5' -SelGPUCC '0,1,2,3,4,5' -Currency USD -Passwordcurrency BTC -interval 120 -Wallet 38mAZJC36XtwPn1w7mBLTWzZC3DpBkfJ3e -Location US -PoolName zpool -Type nvidia -Algorithm hsr,phi,keccak,xevan,veltor,lyra2z,skunk,jha,tribus,c11,x11evo,lbry,skein,equihash,groestl,timetravel,sib,bitcore,hmq1725,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s -Donate 5

And a screenshot. Please help. Lol. Thanks.
https://imgur.com/a/FgCfa

checked your screen shot... my guess is you haven't read Instructions Properly...

Increase Virtual Memory 64gb is optimal... - (Sib needs it) Sib is one of the only Algo's that Actually uses all of that 64gb Sib will not run if you do not increase it....

EWBF is perfect... its say's 466 BTC/GH/DAY... so if you have 1 ghs of equihash you would be getting 466 btc per day... very simple

Regards
Nemo

cmbconcretefire

newbie

Activity: 54

Merit: 0

Hello Nemo. I'm now trying out your zpool miner (v2.2) and I am having an issue. Essentially, the setup process is smooth. Everything downloads with no errors or anything. I edited the 'startzpool.bat' to what I will post below, and it starts up and goes through the benchmarking fine but after the benchmarking it says: Status Failed.

Also, check out the EWBF Equihash benchmark. I'm pretty sure ...... well what's up with that 466 number? Lol.

My bat file:
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.2.ps1 -SelGPUEWBF '0 1 2 3 4 5' -SelGPUCC '0,1,2,3,4,5' -Currency USD -Passwordcurrency BTC -interval 120 -Wallet 38mAZJC36XtwPn1w7mBLTWzZC3DpBkfJ3e -Location US -PoolName zpool -Type nvidia -Algorithm hsr,phi,keccak,xevan,veltor,lyra2z,skunk,jha,tribus,c11,x11evo,lbry,skein,equihash,groestl,timetravel,sib,bitcore,hmq1725,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s -Donate 5

And a screenshot. Please help. Lol. Thanks.
https://imgur.com/a/FgCfa

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: cryptolelefla on November 08, 2017, 03:17:40 AM

Quote from: minerx117 on November 07, 2017, 06:43:39 PM

Quote from: cryptolelefla on November 07, 2017, 04:26:59 PM

hello Nemo. still having this warning setting different port for any algo
Port = 4068 in one session and Port = 4069 in second session

doesn't matter... doesn't effect profits or performance..
its algood

Nemo

how can autoalgo works correctly if it doesn't get right info from miner api (think this need to be fixed for those who like me uses 2 sessions).... i experienced some unreal value un profit.... i looked in code, and i can't find the miner launcher call to add that (just learning)...you can reproduce and test running 3 gpu on two miner session
still some -d $SelGPUCC needed
Alexis78----> hsr
Alexis78cuda9 ----> keccak
CcminerTpruvotcuda9 ----->groestl
Tpruvot ---> cryptonight
thank you Nemo hope community feedback will improve your really nice job.
Flavio

you can reproduce and test running 3 gpu on two miner session ?? Why would you want to?? it runs fine if you just run 1 session... your trying to run two is when you will run in to problems, i know about the issue you are talking about but as i said all my 6 test rigs are not having any problems im running 1060's 1070's and 1080ti's.. 1 session per rig (No problems) it is something i will work on fixing in the future.. its just not a priority right now...

thanks i've updated those -d $SelGPUCC

Best Regards
Nemo

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: jebidia on November 08, 2017, 10:52:52 AM

Hi Nemo,

Been messing with a few different multi-algo miners and am liking what you've done. One thing I'd like to tweak is that I notice upon switching algos it always spends some time hunting for the optimal difficulty, I'm wondering if I can go ahead and set that number manually - knowing that it would be custom to my rig and will need to be tweaked if I add cards etc...I'm using the ZPOOL non 24 hour file.

Thanks in advance,

UPDATE

Think I figured this out:

You need to EDIT the algos respective miner with a multiplier. Symbol -m.

My rig has 4 x 1080ti's and here is what my adjusted algo looks like in ccminerAlexis78:

"blake2s" = " -d $SelGPUCC -m 4" #Blake2s

Basically I noted what difficulty the algo started with and where it ended up and divided the end by the start. that will be your multiple. It appears to be working but I will take this down if something chimes in that this is incorrect.

So Far (for 4 x 1080ti's):

PHI @ -m 16
SIB @ -m 9
Skunk @ -m 3
Blake2s @ -m 3
X17 @ -m 16
HMQ1725 @ -m 36

looks good

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: insaniak on November 08, 2017, 01:58:03 PM

What would cause this error? Intensity too high? How can I reduce it?

increase Virtual Memory for 6 1070's 64gb is needed

default intensity should be fine for 1070's (let me know how you get on) is it only tribus your finding that error?

Regards
Nemo

insaniak

full member

Activity: 137

Merit: 100

What would cause this error? Intensity too high? How can I reduce it?

jebidia

jr. member

Activity: 161

Merit: 1

Hi Nemo,

Been messing with a few different multi-algo miners and am liking what you've done. One thing I'd like to tweak is that I notice upon switching algos it always spends some time hunting for the optimal difficulty, I'm wondering if I can go ahead and set that number manually - knowing that it would be custom to my rig and will need to be tweaked if I add cards etc...I'm using the ZPOOL non 24 hour file.

Thanks in advance,

UPDATE

Think I figured this out:

You need to EDIT the algos respective miner with a multiplier. Symbol -m.

My rig has 4 x 1080ti's and here is what my adjusted algo looks like in ccminerAlexis78:

"blake2s" = " -d $SelGPUCC -m 4" #Blake2s

Basically I noted what difficulty the algo started with and where it ended up and divided the end by the start. that will be your multiple. It appears to be working but I will take this down if something chimes in that this is incorrect.

So Far (for 4 x 1080ti's):

PHI @ -m 16
SIB @ -m 9
Skunk @ -m 3
Blake2s @ -m 3
X17 @ -m 16
HMQ1725 @ -m 36

cryptolelefla

member

Activity: 121

Merit: 10

Quote from: minerx117 on November 07, 2017, 06:43:39 PM

Quote from: cryptolelefla on November 07, 2017, 04:26:59 PM

hello Nemo. still having this warning setting different port for any algo
Port = 4068 in one session and Port = 4069 in second session

doesn't matter... doesn't effect profits or performance..
its algood

Nemo

how can autoalgo works correctly if it doesn't get right info from miner api (think this need to be fixed for those who like me uses 2 sessions).... i experienced some unreal value un profit.... i looked in code, and i can't find the miner launcher call to add that (just learning)...you can reproduce and test running 3 gpu on two miner session
still some -d $SelGPUCC needed
Alexis78----> hsr
Alexis78cuda9 ----> keccak
CcminerTpruvotcuda9 ----->groestl
Tpruvot ---> cryptonight
thank you Nemo hope community feedback will improve your really nice job.
Flavio

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: insaniak on November 07, 2017, 01:12:00 PM

I originally have been having issues with X7 and X8 GPUS and I tried using 6 GPUS and it seems it is working now; although, I ran into a slight issue where it froze for about 3 minutes or so and then started again. Is it possible to implemented a restart of the miner if no shares have been submitted in X amount of time?

i don't have that problem... i have only tested with up2 6 GPU's....

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 158. (Read 289464 times)