[NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 204.

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: clemenmine on June 24, 2017, 11:03:27 AM

I have been running NEMOSMINER for 24hrs on 6-card 1080ti rig using stock settings described by minerx117 here: https://bitcointalk.org/index.php?topic=1777336.440

Very stable. No issues at all. But profit not big. Just $6.12 per card per day.

Feels like big potential with NEMOSMINER and zpool. I am new and just learning though.

yeh it will take 24-48hours for you full income to start come in.. your get more than $6

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: JaredKaragen on June 24, 2017, 05:14:52 PM

Quote from: dragonmike on June 24, 2017, 04:57:01 PM

I'm getting a lot of "GPU #0: result for 0293236d does not validate on CPU!" when mining hmq1725.

Any idea why that is?

it means your gpu is spitting back invalid calculation results and they did not validate when double checked on the CPU.

disable overclocks and set factory settings and see if it still happens.

its poolside.. tryed default clocks exactly the same (disable hmq1725)

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: dragonmike on June 24, 2017, 04:57:01 PM

I'm getting a lot of "GPU #0: result for 0293236d does not validate on CPU!" when mining hmq1725.

Any idea why that is?

it means your gpu is spitting back invalid calculation results and they did not validate when double checked on the CPU.

disable overclocks and set factory settings and see if it still happens.

dragonmike

hero member

Activity: 1274

Merit: 556

I'm getting a lot of "GPU #0: result for 0293236d does not validate on CPU!" when mining hmq1725.

Any idea why that is?

acyclovir

newbie

Activity: 45

Merit: 0

Hi.

I am starting to test neosminer, come from nice hash miner

I have some problems with my mining rig:
4 EVGA 1070 GTX Black SC, 4 GB RAM, 64SSD Mobo Biostar TB-250-BTC, 1200w Corsair, Celeron Skylake. Can not allocate 32GB MEM System Page Due to SSD and RAM size.

My overclock with afterburner: Clock 600, + 60V +, 100% power, 100+ processor. The average consumption is 560kWh

My problems:

1. Sometimes, suddenly one of the GPU's driver disappear, and it stops mining, the other three keep mining fine, it is necessary to restart, to reload the driver again.

2. Sometimes mining rig suddenly turns off, (does not restart) do not know why? I have the mother board setted to restart after forced shut down of the system, but it seems not to work whit neosminer, is there any way to set a command optionplatform to restart system from neosminer, in case of error or system crash?

Thanks in advance

Fromage

sr. member

Activity: 338

Merit: 250

Quote from: clemenmine on June 24, 2017, 10:55:38 AM

Quote from: Fromage on June 23, 2017, 09:38:32 PM

Quote from: minerx117 on June 23, 2017, 08:32:42 PM

Quote from: Filin4eg on June 23, 2017, 06:17:41 PM

On hmq1725 many "result fox xxxxx does not valiadate on cpu"
why this is happen? Rig with 4x1080ti gigabyte on stock.

hmq1725 is running clean now no update needed

I had the issue mentioned earlier Nemo....

1) Copy tpruvot from miners folder and place on desktop

2) rename it to tpruvot1(or whatever you like)

3) Edit with powershell.. only keep open hmq1725... then on this line add the following

Arguments = "-a $_ -o stratum+tcp://$($Pools.(Get-Algorithm($_)).Host):$($Pools.(Get-Algorithm($_)).Port) -u $($Pools.(Get-Algorithm($_)).User) -p $($Pools.(Get-Algorithm($_)).Pass),d=1020$($Commands.$_)"

Note.... I run 1080ti's

This fixed everything and also now I can add diff to every algo...

Hope this helps..... There was also zpool losing connection as well as this problem

Thx Fromage...what do you mean by "only keep open hmq1725"? Do you mean remark out all others with #?

yes or else you get doubles

clemenmine

newbie

Activity: 17

Merit: 0

I have been running NEMOSMINER for 24hrs on 6-card 1080ti rig using stock settings described by minerx117 here: https://bitcointalk.org/index.php?topic=1777336.440

Very stable. No issues at all. But profit not big. Just $6.12 per card per day.

Feels like big potential with NEMOSMINER and zpool. I am new and just learning though.

clemenmine

newbie

Activity: 17

Merit: 0

Quote from: Fromage on June 23, 2017, 09:38:32 PM

Quote from: minerx117 on June 23, 2017, 08:32:42 PM

Quote from: Filin4eg on June 23, 2017, 06:17:41 PM

On hmq1725 many "result fox xxxxx does not valiadate on cpu"
why this is happen? Rig with 4x1080ti gigabyte on stock.

hmq1725 is running clean now no update needed

I had the issue mentioned earlier Nemo....

1) Copy tpruvot from miners folder and place on desktop

2) rename it to tpruvot1(or whatever you like)

3) Edit with powershell.. only keep open hmq1725... then on this line add the following

Arguments = "-a $_ -o stratum+tcp://$($Pools.(Get-Algorithm($_)).Host):$($Pools.(Get-Algorithm($_)).Port) -u $($Pools.(Get-Algorithm($_)).User) -p $($Pools.(Get-Algorithm($_)).Pass),d=1020$($Commands.$_)"

Note.... I run 1080ti's

This fixed everything and also now I can add diff to every algo...

Hope this helps..... There was also zpool losing connection as well as this problem

Thx Fromage...what do you mean by "only keep open hmq1725"? Do you mean remark out all others with #?

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: shotgun1969 on June 23, 2017, 11:18:27 PM

Quote from: Fromage on June 23, 2017, 10:16:41 PM

Yeah 1080ti's are brutes to stratum diff Grin

I was able to adjust diff without stopping the miner... maybe something in the pipeline for later as an option?

This definitely wasn't Nemominer.... I watch this all day... stratum disconnects and throws out the tpruvot ccminer with 1080ti's

Would be nice to see ports for higher stratum starts but I doubt that will happen...

Crackfoo pushed up the low stratum dif to fix this issue on hmq1725 so this shouldnt happen again on hmq1725.

im having issues with hmq1725 disabled it again on my rigs..

dragonmike

hero member

Activity: 1274

Merit: 556

Must say it's working really well, good job mate.
Looking forward to you adding lbry (and veltor). Keep up the good job!

Fromage

sr. member

Activity: 338

Merit: 250

Quote from: shotgun1969 on June 23, 2017, 11:18:27 PM

Quote from: Fromage on June 23, 2017, 10:16:41 PM

Yeah 1080ti's are brutes to stratum diff Grin

I was able to adjust diff without stopping the miner... maybe something in the pipeline for later as an option?

This definitely wasn't Nemominer.... I watch this all day... stratum disconnects and throws out the tpruvot ccminer with 1080ti's

Would be nice to see ports for higher stratum starts but I doubt that will happen...

Crackfoo pushed up the low stratum dif to fix this issue on hmq1725 so this shouldnt happen again on hmq1725.

Ok I wasn't crazy then.... Cheesy

Thanks

shotgun1969

hero member

Activity: 723

Merit: 501

Quote from: Fromage on June 23, 2017, 10:16:41 PM

Yeah 1080ti's are brutes to stratum diff Grin

I was able to adjust diff without stopping the miner... maybe something in the pipeline for later as an option?

This definitely wasn't Nemominer.... I watch this all day... stratum disconnects and throws out the tpruvot ccminer with 1080ti's

Would be nice to see ports for higher stratum starts but I doubt that will happen...

Crackfoo pushed up the low stratum dif to fix this issue on hmq1725 so this shouldnt happen again on hmq1725.

Fromage

sr. member

Activity: 338

Merit: 250

Yeah 1080ti's are brutes to stratum diff Grin

I was able to adjust diff without stopping the miner... maybe something in the pipeline for later as an option?

This definitely wasn't Nemominer.... I watch this all day... stratum disconnects and throws out the tpruvot ccminer with 1080ti's

Would be nice to see ports for higher stratum starts but I doubt that will happen...

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

thanks
i don't want to add diff to every algo tho as this ment to work well with all cards not just 1080ti's...
i tested hmq1725 about a hour ago it was working fine on 1050ti - 1070 ... no errors..

Fromage

sr. member

Activity: 338

Merit: 250

Quote from: minerx117 on June 23, 2017, 08:32:42 PM

Quote from: Filin4eg on June 23, 2017, 06:17:41 PM

On hmq1725 many "result fox xxxxx does not valiadate on cpu"
why this is happen? Rig with 4x1080ti gigabyte on stock.

hmq1725 is running clean now no update needed

I had the issue mentioned earlier Nemo....

1) Copy tpruvot from miners folder and place on desktop

2) rename it to tpruvot1(or whatever you like)

3) Edit with powershell.. only keep open hmq1725... then on this line add the following

Arguments = "-a $_ -o stratum+tcp://$($Pools.(Get-Algorithm($_)).Host):$($Pools.(Get-Algorithm($_)).Port) -u $($Pools.(Get-Algorithm($_)).User) -p $($Pools.(Get-Algorithm($_)).Pass),d=1020$($Commands.$_)"

Note.... I run 1080ti's

This fixed everything and also now I can add diff to every algo...

Hope this helps..... There was also zpool losing connection as well as this problem

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: Filin4eg on June 23, 2017, 06:17:41 PM

On hmq1725 many "result fox xxxxx does not valiadate on cpu"
why this is happen? Rig with 4x1080ti gigabyte on stock.

hmq1725 is running clean now no update needed

kamerico

newbie

Activity: 8

Merit: 0

Quote from: minerx117 on June 23, 2017, 06:51:09 PM

Quote from: yslyung on June 23, 2017, 06:39:30 PM

what are the settings to run it stable, it does get hangs easliy. for 1080 ti

can anyone share what are the estimated 24 hr profits ?

much tia

it is stable........... maybe your rig OC is not..

no hangs on my test rigs...... (1070x6) (1060x5) (1060x4) (1050tix1)

been running for over 24hours...

Mine's is not being stable but it is due to psu issues which I will resolve soon. So far it has been stable undervolt at 70: 3 1080ti and 3 1070 gtx. Profit so far:

Last Hour 3.756630945
Last 6 Hour 10.58858386

Still trying to figure out how to calculates the datetime better but it is 90ish% accurate.

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: yslyung on June 23, 2017, 06:39:30 PM

what are the settings to run it stable, it does get hangs easliy. for 1080 ti

can anyone share what are the estimated 24 hr profits ?

much tia

it is stable........... maybe your rig OC is not..

no hangs on my test rigs...... (1070x6) (1060x5) (1060x4) (1050tix1)

been running for over 24hours...

yslyung

legendary

Activity: 1500

Merit: 1002

Mine Mine Mine

what are the settings to run it stable, it does get hangs easliy. for 1080 ti

can anyone share what are the estimated 24 hr profits ?

much tia

minerx117

sr. member

Activity: 728

Merit: 256

NemosMiner-v3.8.1.3

Quote from: dragonmike on June 23, 2017, 05:17:51 PM

What about LBRY?

todays job..

and veltor..

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 204. (Read 289447 times)