i run gigabyte 1070's itx version @ 75%tdp +55core +596Mem (mining rig)
and also have a 1060 windforce version @ 80%tdp +90core +751Mem (single card gaming pc)
Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 221. (Read 289464 times)
OK I ran it overnight on MPH and it looks like I made maybe $US0.50.
If I were mining ZEC during the same period I would have made $2-$3
I have always had a problem with algo switching - it switches based on what is profitable NOW, so you mine until you have some of that coin but by then the market has all changed again. I guess this is much more suited to someone who has 100s or 1000s of GPUs so that can get instant results. I have only 4 Nvidia GPUs and 6 AMD GPUs so I have to mine what is generally going to give me a reliable price tomorrow, not the best price right now.
Thank you though - it was fun to see how something like this works and I think it's cool that you give this to the community for free.
Good luck to you!
If I were mining ZEC during the same period I would have made $2-$3
I have always had a problem with algo switching - it switches based on what is profitable NOW, so you mine until you have some of that coin but by then the market has all changed again. I guess this is much more suited to someone who has 100s or 1000s of GPUs so that can get instant results. I have only 4 Nvidia GPUs and 6 AMD GPUs so I have to mine what is generally going to give me a reliable price tomorrow, not the best price right now.
Thank you though - it was fun to see how something like this works and I think it's cool that you give this to the community for free.
Good luck to you!
keep checking your balance at MPH i bet you earn't a lot more than 0.50c it will still be coming in.. its takes a while to start coming in as it has to be confirmed, sent to exchange, exchanged, then sent back to you i have been testing both 1.7.1-MPH and 1.7.1-ZPOOL for the last few weeks both has 4x1070's running at 120watts (Total Power from wall(575watt) running and they seem pretty consistent, im pulling in on average 0.016 to 0.019 btc from each rig everyday (note it takes almost 24hours for full income to start coming in so yes if you try this for a short 24 hour or less burst don't expect instant results..
Regards
Nemo
P.S in Regards to the 20% income stealing from ZPOOL that a lot of people have been commenting on in this thread... my 1.7.1-ZPOOL is bringing in more btc everyday compared to 1.7.1-MPH at the moment has been for the last few weeks.. just wanted to test for myself before i commented on it so if ZPOOL is taking 20% MPH must be taking more : ) as far as i can tell the fee's are exactly as they state on the Pools Website 2% for Zpool 0.9%for MPH but as Zpool has alot more algos and coins atm it seems to make more at the moment MPH has its perks to such as much better zcash pool and the etherem algo support is good to..
OK now I am more interested... I think I will try your zpool miner for a few days and see how it goes.
I have a rig which is 2 x 1070s and 2 x 1060 6gb. You say you set your 1070s at 120W which is what - a powerlimit in MSI afterburner of about 75% right? Where would you set 1060s? I would guess at about 85%?
edit: I just noticed equihash at the top of zpool's list so why don't you include EWBF in the zpool list?
How does it decide to "check" and change algorithms? Should I stop it every 8 hours and see or will it swap over automatically somehow?
Error in MPH
Cannot connect to the server. 9
Cannot connect to the server. 9
OK I ran it overnight on MPH and it looks like I made maybe $US0.50.
If I were mining ZEC during the same period I would have made $2-$3
I have always had a problem with algo switching - it switches based on what is profitable NOW, so you mine until you have some of that coin but by then the market has all changed again. I guess this is much more suited to someone who has 100s or 1000s of GPUs so that can get instant results. I have only 4 Nvidia GPUs and 6 AMD GPUs so I have to mine what is generally going to give me a reliable price tomorrow, not the best price right now.
Thank you though - it was fun to see how something like this works and I think it's cool that you give this to the community for free.
Good luck to you!
If I were mining ZEC during the same period I would have made $2-$3
I have always had a problem with algo switching - it switches based on what is profitable NOW, so you mine until you have some of that coin but by then the market has all changed again. I guess this is much more suited to someone who has 100s or 1000s of GPUs so that can get instant results. I have only 4 Nvidia GPUs and 6 AMD GPUs so I have to mine what is generally going to give me a reliable price tomorrow, not the best price right now.
Thank you though - it was fun to see how something like this works and I think it's cool that you give this to the community for free.
Good luck to you!
keep checking your balance at MPH i bet you earn't a lot more than 0.50c it will still be coming in.. its takes a while to start coming in as it has to be confirmed, sent to exchange, exchanged, then sent back to you i have been testing both 1.7.1-MPH and 1.7.1-ZPOOL for the last few weeks both has 4x1070's running at 120watts (Total Power from wall(575watt) running and they seem pretty consistent, im pulling in on average 0.016 to 0.019 btc from each rig everyday (note it takes almost 24hours for full income to start coming in so yes if you try this for a short 24 hour or less burst don't expect instant results..
Regards
Nemo
P.S in Regards to the 20% income stealing from ZPOOL that a lot of people have been commenting on in this thread... my 1.7.1-ZPOOL is bringing in more btc everyday compared to 1.7.1-MPH at the moment has been for the last few weeks.. just wanted to test for myself before i commented on it so if ZPOOL is taking 20% MPH must be taking more : ) as far as i can tell the fee's are exactly as they state on the Pools Website 2% for Zpool 0.9%for MPH but as Zpool has alot more algos and coins atm it seems to make more at the moment MPH has its perks to such as much better zcash pool and the etherem algo support is good to..
OK I ran it overnight on MPH and it looks like I made maybe $US0.50.
If I were mining ZEC during the same period I would have made $2-$3
I have always had a problem with algo switching - it switches based on what is profitable NOW, so you mine until you have some of that coin but by then the market has all changed again. I guess this is much more suited to someone who has 100s or 1000s of GPUs so that can get instant results. I have only 4 Nvidia GPUs and 6 AMD GPUs so I have to mine what is generally going to give me a reliable price tomorrow, not the best price right now.
Thank you though - it was fun to see how something like this works and I think it's cool that you give this to the community for free.
Good luck to you!
If I were mining ZEC during the same period I would have made $2-$3
I have always had a problem with algo switching - it switches based on what is profitable NOW, so you mine until you have some of that coin but by then the market has all changed again. I guess this is much more suited to someone who has 100s or 1000s of GPUs so that can get instant results. I have only 4 Nvidia GPUs and 6 AMD GPUs so I have to mine what is generally going to give me a reliable price tomorrow, not the best price right now.
Thank you though - it was fun to see how something like this works and I think it's cool that you give this to the community for free.
Good luck to you!
ok so I run the MPH one, the first couple of tries it says "stratum authentication failed" which is crzy because I have had an account with MPH for months. Then it reaches lyra2v2 and it's suddenly happy to accept my authentication. Is this just because it has currently decided that lyra2v2 is the most profitable right now? So it fails authentication until it gets to the one it esnt you to minr?
I don't understand how this is working
I don't understand how this is working
yes thats how it works at the moment lyra2v2 is the most profitable for NVIDIA algo on MPH so yes my miner will chose that algo for you. it will automatic change to, when another algo becomes more profitable
"ok so I run the MPH one, the first couple of tries it says "stratum authentication failed" which is crzy" its not crazy it has to cycle through the algo's until it gets to the most profitable so its perfectly normal..
Regards
Nemo
It will connect to the most profitable and not connect to the rest of them, that is how it works.
ok so I run the MPH one, the first couple of tries it says "stratum authentication failed" which is crzy because I have had an account with MPH for months. Then it reaches lyra2v2 and it's suddenly happy to accept my authentication. Is this just because it has currently decided that lyra2v2 is the most profitable right now? So it fails authentication until it gets to the one it esnt you to minr?
I don't understand how this is working
I don't understand how this is working
honestly if all I have to do to set up for zpool is change to my BTC address then that is easy. I have also created a hub miner on MPH and set it for the job you recommended. Now I just have to decide which one to use. There have been a lot of people claiming that zpool is taking 20% fees from people - I don't know what to believe.
Also if this is trying to use the most profitable algorithm - how does it account for power consumpti0 an all that?
Also if this is trying to use the most profitable algorithm - how does it account for power consumpti0 an all that?
NemosMiner-v1.7.1 if you have errors coming up=to fix install MS Visual Studio:
https://www.visualstudio.com/post-download-vs/?sku=community&clcid=0x409&telem=ga#
NemosMiner-v1.7.1 for multi gpu rigs (REMEMBER TO INCREASE YOUR VIRTUAL MEMORY/SWAP FILE to 32gb-40gb some algos such as SIB(x11ghost) use it
Regards
#Nemo
https://www.visualstudio.com/post-download-vs/?sku=community&clcid=0x409&telem=ga#
NemosMiner-v1.7.1 for multi gpu rigs (REMEMBER TO INCREASE YOUR VIRTUAL MEMORY/SWAP FILE to 32gb-40gb some algos such as SIB(x11ghost) use it
Regards
#Nemo
That's all fine - but where do I download it?
in my 1st Post
I think v1.7.1-ZPOOL is more profitable and simple to use than -MPH version. 
i think you might be right ZPOOL has alot more algos than MPH
MPH is very easy to use just create a account and worker and select: AUTO SWITCH (NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein) in HUB WORKERS
Regards
#Nemo
That's all fine - but where do I download it?
I think v1.7.1-ZPOOL is more profitable and simple to use than -MPH version.
Thanks @minerx117 - some really cool stuff here. Once I build my first nvidia rigs, I will be testing this out and supporting. Just discovering these multi-pools, these can end up being critical to remaining as profitable as possible in case of bad times
1.7.1-MPH uploaded update to:
Tanguy ccminer v2.0 RC3: groestl
small changes to .bat
Tanguy ccminer v2.0 RC3: groestl
small changes to .bat
1.7.1-ZPOOL uploaded update to:
Tanguy ccminer v2.0 RC3: New decred stratum protocol (used by suprnova and yiimp)
x64 Binary built with CUDA 7.5
Tanguy ccminer v2.0 RC3: New decred stratum protocol (used by suprnova and yiimp)
x64 Binary built with CUDA 7.5
Please, is not possible create NemosMiner for Mining Pool Hub ?
its coming in 1.7.. in the mean time please try this: aaronsace latest Miner
https://github.com/aaronsace/MultiPoolMiner/releases
Regards
#Nemo
Working on and testing NemosMiner-v1.7 for (Mining Pool Hub) support for NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
will be released in the next 2days..
Regards
Nemo
News for 1.7 version ?
sorry for delay 1.7 is uploading now :
NemosMiner-v1.7-MPH support for NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
NemosMiner-v1.7-ZPOOL support for NVIDIA - decred,timetravel,lyra2z,equihash,sib-x11ghost,lbry,lyra2v2,neoscrypt,nist5,skein,x17,blake2s,blakecoin,c11
Best Regards
#Nemo
Please post a link to where the 1.7 version is. If I follow the MEGA link in the OP I get 1.6.9 version
Please, is not possible create NemosMiner for Mining Pool Hub ?
its coming in 1.7.. in the mean time please try this: aaronsace latest Miner
https://github.com/aaronsace/MultiPoolMiner/releases
Regards
#Nemo
Working on and testing NemosMiner-v1.7 for (Mining Pool Hub) support for NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein
will be released in the next 2days..
Regards
Nemo
News for 1.7 version ?
No Lyra2z support for 1.7 ?
Jump to: