Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 4. (Read 289463 times)

Hello! 

If anyone is interested on using an alternate way to monitor your NemosMiner workers,
I'm happy to announce that NemosMiner support has been added to www.brucomining.com, our cloud platform for mining rig monitoring.

You can have additional features like:

• realtime email notification (multiple recipients) when your rig goes offline/online
• profit statistics per rig (live, 10min, 1h, 1d)
• nice dashboard, mobile friendly, secured with your credentials
• aggregation of different mining software in one single dashboard

You can find some screenshots on our twitter: https://twitter.com/BrucoMining

Check it out!

Bruco

I'm seeing this outside of bechmarking.  Just noticed that CryptoDredge was running 3 instances. 

On a side note, reading the last several posts you'd think "why the hell are these people still running the software??".  The fact is I really like NemosMiner.  Comfortable to use, lots of good information and good mining results.  I believe if these bugs could be eliminated it would be the best choice for mining.

I am also seeing trust issues and Payment threshold zeroing out and not updating on occasion.   I also get the .NET issues as well.    

@Minerx117 Are you planning to look into these issues?

Ok, restarting the miner again resolved the wallet address and Trust is working again.
The HashRate is hit and miss.  Some miners reports it, others don't.

Still seeing the .NET error referencing "out-file" that I mentioned before.  It's occasional.

I updated to 3.5.4 (and after that switched from blazepoolplus to blazepool).  The following happened:

1. The update did not go well on either machine.  In one case the NemosMiner status window ended up running in a blue PowerShell window and in the other case the NemosMiner Runtime window did not display at all.  Exiting and restarting fixed both.
2. Trust is staying at 0 and the mining profitability as well.  Seems to be because the wallet address is empty in the black dos window yet the wallet is being shown in the "Running:" section at the bottom.  See below:
3. The "Running Miners" section in the white Runtime window shows a HashRate of "0 H/s" for some miners even though the miner is mining properly.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Pool name           blazepool
Wallet
Balance              0%
Trust Level         0% Avg based on [ 00 days 00:01 ]
Average BTC/H BTC = 0.00000000 | mBTC = 0.000
Average BTC/D BTC = 0.00000000 | mBTC = 0.000
Estimated Pay Date  Unknown > 0.003 BTC
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


But below that...


Running:

 Speed Started  Active   Cnt  Command
 ----- -------  ------   ---  -------
0  H/s 00:00:00 00:00:00 Once Bin\NVIDIA-CryptoDredge011\CryptoDredge.exe  --api-type ccminer-tcp
                              --no-color --intensity 6 --cpu-priority 5 --no-crashreport --no-watchdog -r
                              -1 -R 1 -b 127.0.0.1:4069 -d 0 -o
                              stratum+tcp://hmq1725.mine.blazepool.com:3747 -u
                               -p ID=,c=BTC -a hmq1725

I updated from source and have a issue where when benchmarking the prior mining session is not exiting out.
Any idea's on what I can do?  None of the usual issues with windows defender or anything.

Miners just keep starting multiple instances for some reason?

It looks like even though I excluded Nemosminer folder, Kaspersky still blocking something that prevent the miner to run properly.

Kaspersky gave me popup saying "Attempt of unauthorized operation using the application Unknown application". The file flagged is



Any idea how to get around this...without disabling the antivirus itself. Feels safe by having it turned on rather than nothing at all.

We've added exosis algo now to www.zpool.ca

Cheers

It just happened again.  The annoying thing is that every time it happens the Trust resets to 0% as do all the earnings numbers.

I'd be happy to work with the dev to resolve this.  Or, is there somewhere else I should report this error?

It just happened to me again a few minutes ago.  It was indeed during a cycle.  If I close the error box and try to stop the mining I get a page full of red errors referencing nonexistent functions.  It's almost like it's losing access to the .NET framework.

I talked with the guy who introduced me to NemosMiner and he gets it as well.  Hoping the dev can shed some light.

^ Happens on all 3 of my machines at random times. Can't figure out what causes it. Seems to occur during a "cycle" so I increased the interval which helped decrease the amount of times it errors.

Luckily it continues to mine at least, but it won't profit switch when the error happens. I just monitor my machines a few times a day and restart nemos when I see the error. 

I'm getting the occasional .NET error while mining.  I've got 2 machines running and it's happened once on each one over a period of 2 days.  In both cases I've found it in the morning after it's been mining all night.  It's still mining, but the error box is on-screen and the main NemosMiner process is crashed.   You can click 'Continue' and the error goes away.  The miner keeps mining but the NemosMiner window no longer updates.  Any idea what the cause is?  The complete trace is below. I can post the whole error if needed.

System.Management.Automation.CommandNotFoundException: The term 'out-file' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
   at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext funcContext, Exception exception)
   at (Closure , FunctionContext )
   at System.Management.Automation.ExceptionHandlingOps.ProcessTraps(FunctionContext funcContext, RuntimeException rte)
   at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext funcContext, Exception exception)
   at (Closure , FunctionContext )
   at System.Management.Automation.ScriptBlock.InvokeWithPipeImpl(ScriptBlockClauseToInvoke clauseToInvoke, Boolean createLocalScope, Dictionary`2 functionsToDefine, List`1 variablesToDefine, ErrorHandlingBehavior errorHandlingBehavior, Object dollarUnder, Object input, Object scriptThis, Pipe outputPipe, InvocationInfo invocationInfo, Object[] args)
   at System.Management.Automation.ScriptBlock.<>c__DisplayClass57_0.b__0()
   at System.Management.Automation.Runspaces.RunspaceBase.RunActionIfNoRunningPipelin esWithThreadCheck(Action action)
   at System.Management.Automation.ScriptBlock.InvokeWithPipe(Boolean useLocalScope, ErrorHandlingBehavior errorHandlingBehavior, Object dollarUnder, Object input, Object scriptThis, Pipe outputPipe, InvocationInfo invocationInfo, Boolean propagateAllExceptionsToTop, List`1 variablesToDefine, Dictionary`2 functionsToDefine, Object[] args)
   at System.Management.Automation.ScriptBlock.InvokeAsDelegateHelper(Object dollarUnder, Object dollarThis, Object[] args)
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

I'm trying to select gpus to mine in config file, but after I saved the config, and open the miner backup, it just restores to default (which is all gpus selected). How do I do then?

Any hint how to MONITOR nemos from different machine?

I want to be able to check miner status from different machine in same network... like... very rudimentary api - if nemos works or not

Hey - you should use CryptoDredge for cryptonight-heavy - it's much faster than XMR-Stak for Nvidia GPUs.

NemosMiner-v3.5.2
https://nemosminer.com

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo  / Fully automated / Auto Downloads Miners / Auto Update

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash  starpool  nlpool  minemoney  blazepool  phiphipool  blockmasters

https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.5.2/NemosMiner-3.5.2.zip

v3.5.2

update xmrstak to v2.5.2 v8
update trex to v0.7.2 (sha256t,timetravel,x22i)
update/add cryptodredge 0.9.3 cuda 9.2 (Allium,Phi2,Cnv8/v8)
add Zjazz-CUDA (x22i)

Fix regional bug in monitoring
improve RTX support 2070/2080/2080ti
improve yescrypt R32 compatibility

Setup Instructions:

  Run NemosMiner.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool
  4. Save Config
  5. Start
  
  note: 2. you only need to change Username if you are using Miningpoolhub
  
 Algo selection / removal

  +algo for algo selection
  -algo for algo removal

  If "+" Used, all selected algo have to be listed
  If "Minus" Used, all algo selected but exluded ones.

  Do not combine + and - for the same algo

 Examples:
 Algo list = -x16r
 Will mine anything but x16r

 Algo list = -x16r,-bcd
 Will mine anything but x16r and bcd

 Algo list = +x16r
 Will mine only x16r

 Algo list = +x16r,+bcd
 Will mine only x16r and BCD

 Algo list = +x16r
 Will mine only x16r

 Algo list blank
 Will mine anything
Pools variants

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to reduce switching
     -Medium switching rate
  normal - uses current estimate API too request profit
     -High switching rate

If you have Windows 7, 8, or 8.1, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=54616

CCMiner may need 'MSVCR120.dll' if you don't already have it:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it:
https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

recommended Nvidia driver 416.34 / http://us.download.nvidia.com/Windows/416.34/416.34-desktop-win10-64bit-international-whql.exe

Made For & Tested with 6x1060 6gb 6x1070 6x1070ti 6x1080ti 6x2080 (users have reported up to 12cards working have not tested myself)
Some miners do not support more that 9 cards

Licensed under the GNU General Public License v3.1
Permissions of this strong copyleft license are conditioned on making available complete source code of licensed works and modifications, which include larger works using a licensed work, under the same license. Copyright and license notices must be preserved. Contributors provide an express grant of patent rights. https://github.com/nemosminer/NemosMiner/blob/master/LICENSE

_______________________________________________________________________________ _____________________________________________________________________________

NemosMiner Monitoring

Keep tabs on all your mining rigs from one place!

https://nemosminer.com

_______________________________________________________________________________ _____________________________________________________________________________

Cheers crackfoo x22i is fully supported

NemosMiner Auto Update checks once every 24hours so properly depends on when that 1070 rig was started.. if you had left it with in 24hours it would of Updated by itself.
If you close and Restart Nemosminer it will check Version on startup and auto update itself if auto update is selected and saved..

Best Regards
Nemo

NemosMiner Auto Update пpoвepяeт тoлькo oдин paз кaждыe 24 чaca, тaк чтo этo зaвиcит oт тoгo, кoгдa былa зaпyщeнa этa ycтaнoвкa 1070. Ecли бы вы ocтaвили ee в тeчeниe 24 чacoв, oнa былa бы oбнoвлeнa caмa пo ceбe. Ecли вы зaкpoeтe и пepeзaгpyзитe Nemosminer, oн пpoвepит вepcию пpи зaпycкe и caмooбнoвлeниe, ecли бyдeт выбpaнo и coxpaнeнo aвтoмaтичecкoe oбнoвлeниe. Mнe былo бы лeгчe в бyдyщeм в бyдyщeм

C нaилyчшими пoжeлaниями Nemo : ) google translate you are funny (No more Russian only English please..) google translate you are funny (Heт бoльшe pyccкoгo языкa, пoжaлyйcтa, пoжaлyйcтa ...)

yes https://nemosminer.com/faq.php

i should update it tho its not much help atm...

Best Regards
Nemo

Nemo, Respect & Thanks for this answer.

Today on one computer with a card 1080 update 3.5.2 occurred automatically. But on other computers with 1070 cards - no. What conditions are needed for auto-update? OS (W10x64) from one image, drivers also the same. After manual restart NM update occurs. Checkbox "auto update" checked "ON"

@U4guk: (пoчти yчкyдyк ) У мeня былa кaк-тo тaкaя пpoблeмa. Peшил пpocтo зaпycкoм чиcтoй cбopки coглacнo вcex тpeбoвaний из readme. Пoпpoбyй oтключить aвтoaпдeйт, ecли включeн. Eщe лyчшe - cкaчaй вooбщe в нoвyю пaпкy cвeжyю cбopкy. Пoчитaй минимaльныe тpeбoвaния в фaйлe readme. Ecли чтo-тo нe cxoдитcя - выпoлни нeoбxoдимыe ycтaнoвки. Hy, a тaк - Nemo пpaвильнo нaпиcaл. Teлeпaтoв кaк бы тyт нeт. Xoть бы oзвyчил чтo зa cиcтeмa, чтo зa кapты, вepcию nemosminer'a. Жeлaтeльнo нa aнглийcкoм, ибo зa Beликий и Moгyчий тyт мoгyт зaбaнить.