@perogi
Why dont you try like jorgebanilla few post back, he got the same error. Read his post on page 155
Topic: New Official AMT Thread - page 4. (Read 149472 times)
We working on that and should have something up tomorrow. But the long and the short is download win32 disk imager. and SD formatter 4.
To be safe, better use a new SD card. If you don't have one use SD Formatter 4 to format the SD card.
Then put the SD card into your computer.
Then extract the image from the archive you download and select it via the win32 application. Then click "write" and it will write the image to the SD card.
Then put the SD card back in the pi.
Then go to 192.168.1.100 (the default ip address) and you should be good to go.
SSH via
user: admin
pass: stone201405
Sadly this didn't help and I'm getting the same error. Please note that the login/password for the linked image is: root/admin. Do you have another image available?
What error are you getting?
We working on that and should have something up tomorrow. But the long and the short is download win32 disk imager. and SD formatter 4.
To be safe, better use a new SD card. If you don't have one use SD Formatter 4 to format the SD card.
Then put the SD card into your computer.
Then extract the image from the archive you download and select it via the win32 application. Then click "write" and it will write the image to the SD card.
Then put the SD card back in the pi.
Then go to 192.168.1.100 (the default ip address) and you should be good to go.
SSH via
user: admin
pass: stone201405
Sadly this didn't help and I'm getting the same error. Please note that the login/password for the linked image is: root/admin. Do you have another image available?
We working on that and should have something up tomorrow. But the long and the short is download win32 disk imager. and SD formatter 4.
To be safe, better use a new SD card. If you don't have one use SD Formatter 4 to format the SD card.
Then put the SD card into your computer.
Then extract the image from the archive you download and select it via the win32 application. Then click "write" and it will write the image to the SD card.
Then put the SD card back in the pi.
Then go to 192.168.1.100 (the default ip address) and you should be good to go.
SSH via
user: admin
pass: stone201405
Thank you!
No problem.
We working on that and should have something up tomorrow. But the long and the short is download win32 disk imager. and SD formatter 4.
To be safe, better use a new SD card. If you don't have one use SD Formatter 4 to format the SD card.
Then put the SD card into your computer.
Then extract the image from the archive you download and select it via the win32 application. Then click "write" and it will write the image to the SD card.
Then put the SD card back in the pi.
Then go to 192.168.1.100 (the default ip address) and you should be good to go.
SSH via
user: admin
pass: stone201405
Thank you!
AMT should provide the right image, it's risky for me to try to extract and provide it - you could blame me for giving you a bad image or problems down the line.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
Thank you for the reply! So it seems that I have the newest image (which doesn't work). I understand your concern about providing me an extracted image - maybe someone else has one handy that they know works :-)
There you go, try that image.
https://www.dropbox.com/s/4fhw6awwndsilky/amt_a1_0824v01.img.bz2?dl=0
Thank you!!! Can you direct me to the instructions on how to install this image? Take care.
We working on that and should have something up tomorrow. But the long and the short is download win32 disk imager. and SD formatter 4.
To be safe, better use a new SD card. If you don't have one use SD Formatter 4 to format the SD card.
Then put the SD card into your computer.
Then extract the image from the archive you download and select it via the win32 application. Then click "write" and it will write the image to the SD card.
Then put the SD card back in the pi.
Then go to 192.168.1.100 (the default ip address) and you should be good to go.
SSH via
user: admin
pass: stone201405
AMT should provide the right image, it's risky for me to try to extract and provide it - you could blame me for giving you a bad image or problems down the line.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
Thank you for the reply! So it seems that I have the newest image (which doesn't work). I understand your concern about providing me an extracted image - maybe someone else has one handy that they know works :-)
There you go, try that image.
https://www.dropbox.com/s/4fhw6awwndsilky/amt_a1_0824v01.img.bz2?dl=0
Thank you!!! Can you direct me to the instructions on how to install this image? Take care.
A also received a miner with no PSU, there were also wires unplugged. I don't want to open the case and start messing around with it, what if taking the cards out doesn't work, what if a connector breaks? I am not shipping this thing for support to Europe or China. There is no way you can say I received a miner, because I didn't. I received an incomplete kit of parts. From what it looks like, there is not enough room to fit a PSU, this miner is also defective and the defect is probably the reason why they did not send a PSU, because it wouldn't fit in the miner!
This will not fit with my PSU, can't get the plug in for the miner to rest in the spot the've provided for it. There isn't a reason I shouldn't have received a fully assembled miner. It's what I paid for I thought.
You need to plug in the 8pin EPS cable prior to installing the PSU. After its plugged in, drop in the PSU towards the fans and then Carefully while putting a bit of pressure on the 8pin connector (pulling upwards) gently slide the psu forward. Don't just shove it in there, ease it in, bit by bit.
That's how we install the psu's, otherwise yes it is very difficult once the PSU is already installed. If your successful the connector is actually leaning against the PSU. This is not safe, the vibration from the PSU would weaken the connector on the card if it were run like this. Please send me something safe and properly designed.
Ok this is crazy. How the hell do I even get into the web UI?
Go to the IP address in the browser which is posted on the side of the miner.
Right now I'm wasting power and killing my hearing to try and set this up.
Ok this is crazy. How the hell do I even get into the web UI?
Dear AMT
I would like to formally request you post the source code to your cgminer modifications that you are distributing in binary only form which you are obliged to provide by law according to the license conditions of cgminer that you implicitly agreed upon by using it for your device.
Thanks.
I would like to formally request you post the source code to your cgminer modifications that you are distributing in binary only form which you are obliged to provide by law according to the license conditions of cgminer that you implicitly agreed upon by using it for your device.
Thanks.
We'll see if we can get it, but it was created for us. Chinese don't like to give our binaries. We'll do what we can.
Working on it.
AMT should provide the right image, it's risky for me to try to extract and provide it - you could blame me for giving you a bad image or problems down the line.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
Thank you for the reply! So it seems that I have the newest image (which doesn't work). I understand your concern about providing me an extracted image - maybe someone else has one handy that they know works :-)
There you go, try that image.
https://www.dropbox.com/s/4fhw6awwndsilky/amt_a1_0824v01.img.bz2?dl=0
AMT should provide the right image, it's risky for me to try to extract and provide it - you could blame me for giving you a bad image or problems down the line.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
Thank you for the reply! So it seems that I have the newest image (which doesn't work). I understand your concern about providing me an extracted image - maybe someone else has one handy that they know works :-)
A also received a miner with no PSU, there were also wires unplugged. I don't want to open the case and start messing around with it, what if taking the cards out doesn't work, what if a connector breaks? I am not shipping this thing for support to Europe or China. There is no way you can say I received a miner, because I didn't. I received an incomplete kit of parts. From what it looks like, there is not enough room to fit a PSU, this miner is also defective and the defect is probably the reason why they did not send a PSU, because it wouldn't fit in the miner!
This will not fit with my PSU, can't get the plug in for the miner to rest in the spot the've provided for it. There isn't a reason I shouldn't have received a fully assembled miner. It's what I paid for I thought.
You need to plug in the 8pin EPS cable prior to installing the PSU. After its plugged in, drop in the PSU towards the fans and then Carefully while putting a bit of pressure on the 8pin connector (pulling upwards) gently slide the psu forward. Don't just shove it in there, ease it in, bit by bit.
That's how we install the psu's, otherwise yes it is very difficult once the PSU is already installed. If your successful the connector is actually leaning against the PSU. A also received a miner with no PSU, there were also wires unplugged. I don't want to open the case and start messing around with it, what if taking the cards out doesn't work, what if a connector breaks? I am not shipping this thing for support to Europe or China. There is no way you can say I received a miner, because I didn't. I received an incomplete kit of parts. From what it looks like, there is not enough room to fit a PSU, this miner is also defective and the defect is probably the reason why they did not send a PSU, because it wouldn't fit in the miner!
This will not fit with my PSU, can't get the plug in for the miner to rest in the spot the've provided for it. There isn't a reason I shouldn't have received a fully assembled miner. It's what I paid for I thought.
Yes, that confirms they are defective because I have the same exact problem. The reason they did not include the power supply is that it just didn't fit. I think the defect is they spaced the boards wrong, so instead they just shipped the defective miners instead of fixing them.
Dear AMT
I would like to formally request you post the source code to your cgminer modifications that you are distributing in binary only form which you are obliged to provide by law according to the license conditions of cgminer that you implicitly agreed upon by using it for your device.
Thanks.
I would like to formally request you post the source code to your cgminer modifications that you are distributing in binary only form which you are obliged to provide by law according to the license conditions of cgminer that you implicitly agreed upon by using it for your device.
Thanks.
We'll see if we can get it, but it was created for us. Chinese don't like to give our binaries. We'll do what we can.
A also received a miner with no PSU, there were also wires unplugged. I don't want to open the case and start messing around with it, what if taking the cards out doesn't work, what if a connector breaks? I am not shipping this thing for support to Europe or China. There is no way you can say I received a miner, because I didn't. I received an incomplete kit of parts. From what it looks like, there is not enough room to fit a PSU, this miner is also defective and the defect is probably the reason why they did not send a PSU, because it wouldn't fit in the miner!
This will not fit with my PSU, can't get the plug in for the miner to rest in the spot the've provided for it. There isn't a reason I shouldn't have received a fully assembled miner. It's what I paid for I thought.
AMT_Miners:
Can you tell me what this error message means?
root@raspberrypi:/var/www# cat ./cgminer.log
[2014-08-23 03:37:32] Started cgminer 3.9.3
[2014-08-23 03:37:32] Run Reset=0
[2014-08-23 03:37:32] SPI Speed 4000 kHz
[2014-08-23 03:37:32] ST MCU - Disable
[2014-08-23 03:37:32] ASIC Difficulty = 256
[2014-08-23 03:37:32] GPIO CS is OFF
[2014-08-23 03:37:32] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
[2014-08-23 03:37:38] Failure(cs0)(20): missing ACK for cmd 0x04
[2014-08-23 03:37:38] ACK(cs0) timeout:cmd_RESET_BCAST-6.2967s
[2014-08-23 03:37:38] No any A1 board
Thanks,
perogi
Can you tell me what this error message means?
root@raspberrypi:/var/www# cat ./cgminer.log
[2014-08-23 03:37:32] Started cgminer 3.9.3
[2014-08-23 03:37:32] Run Reset=0
[2014-08-23 03:37:32] SPI Speed 4000 kHz
[2014-08-23 03:37:32] ST MCU - Disable
[2014-08-23 03:37:32] ASIC Difficulty = 256
[2014-08-23 03:37:32] GPIO CS is OFF
[2014-08-23 03:37:32] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
[2014-08-23 03:37:38] Failure(cs0)(20): missing ACK for cmd 0x04
[2014-08-23 03:37:38] ACK(cs0) timeout:cmd_RESET_BCAST-6.2967s
[2014-08-23 03:37:38] No any A1 board
Thanks,
perogi
Your better off using the original image that comes with the miner, the one posted up looks like its actually a earlier revision the UI is more basic or unfinished?!?
Thanks NaranKPatel but this IS the image that came with the miner :-(
The webpage UI is really minimal - would that mean that it's the original image? I wonder if I got someone else's machine after they updated and returned it.
AMT should provide the right image, it's risky for me to try to extract and provide it - you could blame me for giving you a bad image or problems down the line.
I tried the updated image that was posted on dropbox on another usb flash card and I got the same problem you're seeing, going back to using original image, I didn't experience this issue, so just passing on my personal experience.
AMT_Miners:
Can you tell me what this error message means?
root@raspberrypi:/var/www# cat ./cgminer.log
[2014-08-23 03:37:32] Started cgminer 3.9.3
[2014-08-23 03:37:32] Run Reset=0
[2014-08-23 03:37:32] SPI Speed 4000 kHz
[2014-08-23 03:37:32] ST MCU - Disable
[2014-08-23 03:37:32] ASIC Difficulty = 256
[2014-08-23 03:37:32] GPIO CS is OFF
[2014-08-23 03:37:32] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
[2014-08-23 03:37:38] Failure(cs0)(20): missing ACK for cmd 0x04
[2014-08-23 03:37:38] ACK(cs0) timeout:cmd_RESET_BCAST-6.2967s
[2014-08-23 03:37:38] No any A1 board
Thanks,
perogi
Can you tell me what this error message means?
root@raspberrypi:/var/www# cat ./cgminer.log
[2014-08-23 03:37:32] Started cgminer 3.9.3
[2014-08-23 03:37:32] Run Reset=0
[2014-08-23 03:37:32] SPI Speed 4000 kHz
[2014-08-23 03:37:32] ST MCU - Disable
[2014-08-23 03:37:32] ASIC Difficulty = 256
[2014-08-23 03:37:32] GPIO CS is OFF
[2014-08-23 03:37:32] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
[2014-08-23 03:37:38] Failure(cs0)(20): missing ACK for cmd 0x04
[2014-08-23 03:37:38] ACK(cs0) timeout:cmd_RESET_BCAST-6.2967s
[2014-08-23 03:37:38] No any A1 board
Thanks,
perogi
Your better off using the original image that comes with the miner, the one posted up looks like its actually a earlier revision the UI is more basic or unfinished?!?
Thanks NaranKPatel but this IS the image that came with the miner :-(
The webpage UI is really minimal - would that mean that it's the original image? I wonder if I got someone else's machine after they updated and returned it.
Jump to: