Nexus - Pure SHA3 + CPU/GPU + nPoS + 15 Active Innovations + More to Come - page 195.

BitcoinSanDiego

full member

Activity: 126

Merit: 100

Quote from: AliMan on September 28, 2015, 08:22:22 PM

That would probably be the last thing, I mean we're yet to have the next update.

I don't think it should be done in a hurry. Everything in good time.

That usually means never. Seen it before. Core development stays centralized. Eventually, dev gets paranoid that he will lose control of project if someone forks the code. Who cares if someone forks the code? That is the best thing possible because it means someone will test the code with different parameters. Now Viz is talking about patenting his codebase.

What would Satoshi think about that?

AliMan

hero member

Activity: 1974

Merit: 502

Vave.com - Crypto Casino

That would probably be the last thing, I mean we're yet to have the next update.

I don't think it should be done in a hurry. Everything in good time.

merc84

hero member

Activity: 799

Merit: 1000

Quote from: BitcoinSanDiego on September 28, 2015, 12:26:00 PM

Quote from: calem on September 24, 2015, 11:10:52 PM

Quote from: AliMan on September 24, 2015, 11:06:55 PM

Strange how?

Maybe because of it's closed source?

Anyone know the ETA for open-sourcing Nexus core?

Viz?

BitcoinSanDiego

full member

Activity: 126

Merit: 100

Quote from: calem on September 24, 2015, 11:10:52 PM

Quote from: AliMan on September 24, 2015, 11:06:55 PM

Strange how?

Maybe because of it's closed source?

Anyone know the ETA for open-sourcing Nexus core?

calem

full member

Activity: 291

Merit: 106

Founder #Zerozed $x0z

Quote from: Conqueror on September 28, 2015, 04:34:02 AM

What you mean by trust expiration time?

Current expiration timeout is 24 hours.

If you stop staking for 24 hours, you will have to start again. It is a hassle if your internet connection is disrupted for 24 hours or if you forget to restart staking if your wallet is closed or you must reboot the computer.

It was a community requested change and is a good one.

Also, if you stake for 1 year without timeout, the update will allow you to reach up to 5% instead of the current maximum interest.

Conqueror

legendary

Activity: 1354

Merit: 1020

I was diagnosed with brain parasite

Quote from: Namsbreh on September 28, 2015, 04:07:36 AM

Waiting patiently for next update with increased trust key expiration time. I'm not wasting my time/power staking Niro again until the expiration time is extend as promised, that really annoyed me when my key reset after a months continuous staking.

What you mean by trust expiration time?
I hold my wallet open nonstop so I can reach 3% interest rate after 1 year as said in specification.
Or is this not like that?

There is some more staking info in wallet, can anybody explain to me what that means please:) Huh

Interest rate - i know what that is
Stake weight - ?
Trust weight - ?
Block weight - ?

calem

full member

Activity: 291

Merit: 106

Founder #Zerozed $x0z

Quote from: Namsbreh on September 28, 2015, 04:07:36 AM

Waiting patiently for next update with increased trust key expiration time. I'm not wasting my time/power staking Niro again until the expiration time is extend as promised, that really annoyed me when my key reset after a months continuous staking.

Trust is something one earns. But yes, the increase is a good idea. With that said though, anything more then 1 week will leave it open to exploitation in my opinion.

Namsbreh

sr. member

Activity: 318

Merit: 250

Waiting patiently for next update with increased trust key expiration time. I'm not wasting my time/power staking Niro again until the expiration time is extend as promised, that really annoyed me when my key reset after a months continuous staking.

Videlicet

legendary

Activity: 868

Merit: 1058

Creator of Nexus http://nexus.io

Part of the LLP integration Todo. Wink

Thank You,
Viz.

Conqueror

legendary

Activity: 1354

Merit: 1020

I was diagnosed with brain parasite

Quote from: merc84 on September 26, 2015, 07:11:45 AM

Quote from: Conqueror on September 26, 2015, 05:03:11 AM

My wallet is showing only 3 connections to network, is it normal?
Do I need to add any nodes?

I have this issue from time to time, you can delete ur addr.dat and usually that will fix the issue.

It helped, but perhaps this issue should be put on developers to do list...

merc84

hero member

Activity: 799

Merit: 1000

Quote from: Conqueror on September 26, 2015, 05:03:11 AM

My wallet is showing only 3 connections to network, is it normal?
Do I need to add any nodes?

I have this issue from time to time, you can delete ur addr.dat and usually that will fix the issue.

Conqueror

legendary

Activity: 1354

Merit: 1020

I was diagnosed with brain parasite

My wallet is showing only 3 connections to network, is it normal?
Do I need to add any nodes?

calem

full member

Activity: 291

Merit: 106

Founder #Zerozed $x0z

Quote from: merc84 on September 25, 2015, 07:38:26 PM

Are u sure its not 6.4 Mh/s struggle to see 64Mh/s with only 6% useage.

Maybe your right.. I'll take a screen cap later. Just got up.

merc84

hero member

Activity: 799

Merit: 1000

Quote from: calem on September 25, 2015, 04:15:49 AM

Ok, so from what I can see... There's no tweaking to be done with the CUDA skminer Sad

~~I'll screen cap and report soon. Bouncing heavily between what I assume is on average 64MH/s.~~

Ok so what's happening is this. It takes about a max of 5 seconds for the card to wind up to it's stable rate of ~64MH/s +-1MH/s.

If a block is discovered before that 5 second period, the first couple of lines can show anything between 0 and about 40.

Running on the latest drivers and cuda toolkit via "GV-N78TOC-3GD" (Gigabyte GTX 780ti 3GB OC edition) - http://www.gigabyte.com.au/products/product-page.aspx?pid=4839#ov

The GPU load is only 6% so once theres an optimised CUDA miner, we should see some AMAZING rates coming from these cards.

Are u sure its not 6.4 Mh/s struggle to see 64Mh/s with only 6% useage.

AliMan

hero member

Activity: 1974

Merit: 502

Vave.com - Crypto Casino

Quote from: calem on September 25, 2015, 04:15:49 AM

Ok, so from what I can see... There's no tweaking to be done with the CUDA skminer Sad

~~I'll screen cap and report soon. Bouncing heavily between what I assume is on average 64MH/s.~~

Ok so what's happening is this. It takes about a max of 5 seconds for the card to wind up to it's stable rate of ~64MH/s +-1MH/s.

If a block is discovered before that 5 second period, the first couple of lines can show anything between 0 and about 40.

Running on the latest drivers and cuda toolkit via "GV-N78TOC-3GD" (Gigabyte GTX 780ti 3GB OC edition) - http://www.gigabyte.com.au/products/product-page.aspx?pid=4839#ov

The GPU load is only 6% so once theres an optimised CUDA miner, we should see some AMAZING rates coming from these cards.

Why not just use the already provided miners?

starblocks

hero member

Activity: 1344

Merit: 502

calem

full member

Activity: 291

Merit: 106

Founder #Zerozed $x0z

Ok, so from what I can see... There's no tweaking to be done with the CUDA skminer Sad

~~I'll screen cap and report soon. Bouncing heavily between what I assume is on average 64MH/s.~~

Ok so what's happening is this. It takes about a max of 5 seconds for the card to wind up to it's stable rate of ~64MH/s +-1MH/s.

If a block is discovered before that 5 second period, the first couple of lines can show anything between 0 and about 40.

Running on the latest drivers and cuda toolkit via "GV-N78TOC-3GD" (Gigabyte GTX 780ti 3GB OC edition) - http://www.gigabyte.com.au/products/product-page.aspx?pid=4839#ov

The GPU load is only 6% so once theres an optimised CUDA miner, we should see some AMAZING rates coming from these cards.

calem

full member

Activity: 291

Merit: 106

Founder #Zerozed $x0z

Quote from: Conqueror on September 25, 2015, 02:41:30 AM

Hey man, how many coins are you mining per day with your setup?

With the single R9 270oc 2gb I mined about 500 over 5 days roughly. Some days were better then others.

Looks like I can't get the 780ti running due a compute compatibility issue.. Gonna make a post in a bit detailing the issue and whether or not theres a way around this cause so far from what i can tell, I'm up a nasty creek without a paddle. (Theres nothing I can do to get windows mining via CUDA on the 700 series or above)

Code:

[MASTER]  Failed to Update Hight

UPDATE

I was supposed to unlock the wallet for staking AND mining!

I'm an idiot xD Don't worry peoples it's all good!

Conqueror

legendary

Activity: 1354

Merit: 1020

I was diagnosed with brain parasite

Quote from: calem on September 25, 2015, 01:34:29 AM

Just preemptively asking before I swap out the cards...
So I have the x64 win build of the cuda skminer... Lookin at a few bits and pieces trying to jolt my memory but I'm not sure if theres any parameters to set in the batch launch file :/ Am I mistaken?

edit

My question is this. What flags can I use in the .bat? I know I wedge em in the following line where "x" "etc" and "derp" is where I assume flags go..

Code:

skminer.exe -X -etc -derp 127.0.0.1  9325

Hey man, how many coins are you mining per day with your setup?

calem

full member

Activity: 291

Merit: 106

Founder #Zerozed $x0z

Just preemptively asking before I swap out the cards...
So I have the x64 win build of the cuda skminer... Lookin at a few bits and pieces trying to jolt my memory but I'm not sure if theres any parameters to set in the batch launch file :/ Am I mistaken?

edit

My question is this. What flags can I use in the .bat? I know I wedge em in the following line where "x" "etc" and "derp" is where I assume flags go..

Code:

skminer.exe -X -etc -derp 127.0.0.1  9325

Topic: Nexus - Pure SHA3 + CPU/GPU + nPoS + 15 Active Innovations + More to Come - page 195. (Read 785514 times)