this coin is strange but i like it 
Strange how?
Strange that it isn't worth more?
Topic: Nexus - Pure SHA3 + CPU/GPU + nPoS + 15 Active Innovations + More to Come - page 196. (Read 785531 times)
September 24, 2015, 10:15:58 PM
Strange how?
Strange that it isn't worth more?
September 24, 2015, 10:10:52 PM
Strange how?
Maybe because of it's closed source?
September 24, 2015, 10:06:55 PM
this coin is strange but i like it
Strange how?
September 24, 2015, 09:58:44 PM
this coin is strange but i like it
September 24, 2015, 08:10:11 PM
So after crashing the computer multitudes of times I'm still not able to stablise higher 16.4MH/s
I would go through listing all the combinations but it would be a flood of text.
If anyone can throw me some proven drivers for win 10 or conf settings for a 270oc 2gb on the S/K algo. I'll give it a shot.
Short and tall, I'm happy with I have achieved and there was 0 skill or luck involved.
I'm keeping mem-clock @ 350 and intensity @ 21 with engine and shaders @ the cards stock clock. This gives me 16.1 +-0.1 with a kinder heat/load on the gpu.
Cheers for everyones help!
I would go through listing all the combinations but it would be a flood of text.
If anyone can throw me some proven drivers for win 10 or conf settings for a 270oc 2gb on the S/K algo. I'll give it a shot.
Short and tall, I'm happy with I have achieved and there was 0 skill or luck involved.
I'm keeping mem-clock @ 350 and intensity @ 21 with engine and shaders @ the cards stock clock. This gives me 16.1 +-0.1 with a kinder heat/load on the gpu.
Cheers for everyones help!
September 24, 2015, 07:58:13 PM
Early reports.
The drivers didn't crash the system but on their own didn't increase performance
Quartered the defualt mem-clock and increased gpu-enigine to 1000 and this got me up to 16.5 +-0.1
I'll keep tinkering.
The drivers didn't crash the system but on their own didn't increase performance
Quartered the defualt mem-clock and increased gpu-enigine to 1000 and this got me up to 16.5 +-0.1
I'll keep tinkering.
September 24, 2015, 07:25:51 PM
I would increase your gpu-engine. Mem-clock doesn't matter too much with this hashing algo. Underclocking memory might actually help with heat.
You may also want to set gpu-powertune if you increase the engine.
You may also want to set gpu-powertune if you increase the engine.
Cheers for the advice! I'll give it a go.
Nothing really other than drivers I think i had best results with 15.7 here's a link to the dll's if u need it. https://www.dropbox.com/s/e70ctq2m8bm9cjo/15.7cl.rar?dl=0
Hopefully these might be win 10 compatible.
Cheers!
September 24, 2015, 05:28:31 PM
Nothing really other than drivers I think i had best results with 15.7 here's a link to the dll's if u need it. https://www.dropbox.com/s/e70ctq2m8bm9cjo/15.7cl.rar?dl=0
They Windows 10 compatible?
September 24, 2015, 05:26:33 PM
Nothing really other than drivers I think i had best results with 15.7 here's a link to the dll's if u need it. https://www.dropbox.com/s/e70ctq2m8bm9cjo/15.7cl.rar?dl=0
September 24, 2015, 05:21:51 PM
All you're doing in GPU-z is discovering the stock clocks of your cards....
Not exactly the best for max hashrate.
Not exactly the best for max hashrate.
What cards do you have and what is your best rates you get from them?
R9 380s... about 25 mh/s.
I would increase your gpu-engine. Mem-clock doesn't matter too much with this hashing algo. Underclocking memory might actually help with heat.
You may also want to set gpu-powertune if you increase the engine.
25Mh/s still seems low for r9 380.
My thoughts exactly. Miners aren't optimized for tonga architecture yet...maybe they will never be.
If you have any thoughts as to what I can do to boost this, I'm all ears
September 24, 2015, 05:12:58 PM
All you're doing in GPU-z is discovering the stock clocks of your cards....
Not exactly the best for max hashrate.
Not exactly the best for max hashrate.
What cards do you have and what is your best rates you get from them?
R9 380s... about 25 mh/s.
I would increase your gpu-engine. Mem-clock doesn't matter too much with this hashing algo. Underclocking memory might actually help with heat.
You may also want to set gpu-powertune if you increase the engine.
25Mh/s still seems low for r9 380.
September 24, 2015, 10:24:50 AM
All you're doing in GPU-z is discovering the stock clocks of your cards....
Not exactly the best for max hashrate.
Not exactly the best for max hashrate.
What cards do you have and what is your best rates you get from them?
R9 380s... about 25 mh/s.
I would increase your gpu-engine. Mem-clock doesn't matter too much with this hashing algo. Underclocking memory might actually help with heat.
You may also want to set gpu-powertune if you increase the engine.
September 24, 2015, 09:38:21 AM
All you're doing in GPU-z is discovering the stock clocks of your cards....
Not exactly the best for max hashrate.
Not exactly the best for max hashrate.
What cards do you have and what is your best rates you get from them?
September 24, 2015, 09:26:41 AM
Well, I think I've found the sweet spot for the Gigabyte R9 270 OC edition. The drivers suggested in this thread have done nothing but made the miner crash with the exception of the singular 14.9 amd_opencl64.dll (which I'm leaving in there just cause).
Using GPU-z to match "gpu-engine" : "975", "gpu-memclock" : "1400" and "gpu-shaders" : "1280" and lowering "intensity" : "21" with all other values default, the miner runs at 16.2MH/s with a variance of +-0.1
I'm ready to move onto the 780ti now.. This should be interesting.. xD
Using GPU-z to match "gpu-engine" : "975", "gpu-memclock" : "1400" and "gpu-shaders" : "1280" and lowering "intensity" : "21" with all other values default, the miner runs at 16.2MH/s with a variance of +-0.1
I'm ready to move onto the 780ti now.. This should be interesting.. xD
All you're doing in GPU-z is discovering the stock clocks of your cards....
Not exactly the best for max hashrate.
September 24, 2015, 05:35:51 AM
Maybe dropping the dll's into the root of the miner is causing the issue.. Damn you microsoft. This is why I moved to ubuntu on my new main machine when you killed my old one.. Literally.. Killed the hdd, I even though said no to the update but it shoved it down my throat in case i would say yes and put win 8.1 into an ilod.. woot :/
I think I will need to rollback the actual systems amd drivers to 14.9 then.. Meh, I'll be moving to 780ti anyways, I just wanted to see what I could pull from the 270. Never should have bothered swappin out to the spare card to begin with.
Well movin on. Up next, CUDA fun!
September 24, 2015, 05:20:54 AM
Might be a windows 10 thing?
Yes September 24, 2015, 02:12:23 AM
Well, I think I've found the sweet spot for the Gigabyte R9 270 OC edition. The drivers suggested in this thread have done nothing but made the miner crash with the exception of the singular 14.9 amd_opencl64.dll (which I'm leaving in there just cause).
Using GPU-z to match "gpu-engine" : "975", "gpu-memclock" : "1400" and "gpu-shaders" : "1280" and lowering "intensity" : "21" with all other values default, the miner runs at 16.2MH/s with a variance of +-0.1
I'm ready to move onto the 780ti now.. This should be interesting.. xD
Using GPU-z to match "gpu-engine" : "975", "gpu-memclock" : "1400" and "gpu-shaders" : "1280" and lowering "intensity" : "21" with all other values default, the miner runs at 16.2MH/s with a variance of +-0.1
I'm ready to move onto the 780ti now.. This should be interesting.. xD
September 24, 2015, 01:54:02 AM
R9 380's got 24 mh/s each (pretty disappointed in this figure)
FX 9590 Pulled around 300 PPS in the cpu channel
FX 9590 Pulled around 300 PPS in the cpu channel
Which driver, version really does matter. You can add the dll's to the same folder as the miner to save re-installing drivers.
I did add the dll's to the same folder as the miner... i dunno about what version, it's late, and I've been drinking lol
Whatever the newest driver for windows 10 is.
I dropped in the 14.9 amd_opencl64.dll on its own, no other drivers, and now it actually runs.. But theres no increase in performance beyond my reported ~16.1MH/s
I'll try messing around with other combinations of drivers, but so far this is the only one ive seen not crash.
September 24, 2015, 01:36:21 AM
Happy One Year Anniversary to Nexus aka Coinshield !
We are Nexus
We are Nexus
What the hell, Nexus was Coinshield before?
Development goals outgrew the scope of the coinshield project...where you been?!
September 24, 2015, 01:35:37 AM
R9 380's got 24 mh/s each (pretty disappointed in this figure)
FX 9590 Pulled around 300 PPS in the cpu channel
FX 9590 Pulled around 300 PPS in the cpu channel
Which driver, version really does matter. You can add the dll's to the same folder as the miner to save re-installing drivers.
I did add the dll's to the same folder as the miner... i dunno about what version, it's late, and I've been drinking lol
Whatever the newest driver for windows 10 is.
Jump to: