OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable

taserz

sr. member

Activity: 800

Merit: 294

Created AutoTune to saved the planet! ~USA

Hey I realized you edited out the front page. Is there a link anywhere for this as I would love to link this for the older bmminer mods on my other thread.

elmejorrematador

member

Activity: 134

Merit: 21

Hello guys,

So is the free version still available? I saw that there is supposed to be a for sale version to use for more than 10 machines?

awilliams315

newbie

Activity: 1

Merit: 0

*** Some info for those with T9+ based off my machine ****

I have a T9+ and using 870 mV, 675 freq, have customize fan speed at 50%, and i left the box checked for going over 90 degrees since this is the first time i have used any software before with the miner.

With this I am averaging 12,511.71 GH/s and the temps are ranging from 80-86 on different chains. But my fan is constantly running at 6,120 so I gotta figure out that since I dont want it running full speed. But hope this helps someone

boogiebl

newbie

Activity: 3

Merit: 0

one more question, and I will not be bored ... I have a DOA device ... can I deploy it

https://imgur.com/a/Om2Y3v6

alex1560

member

Activity: 67

Merit: 24

You can flash the original firmware or extract bmminer file from a regular machine and use it with the deployer.

https://file11.bitmain.com/shop-product/firmware/Antminer%20T9%2B/Firmware/00720181126222105736ja7USR1p0695/Antminer-T9%2B-all-201811211435-autofreq-user-Update2UBI-NF.tar.gz

boogiebl

newbie

Activity: 3

Merit: 0

Quote from: ?? on ??

:/ ok. And how can I get back to the state before? Can I install new firmware? I want to have the option to return to the factory settings in case something goes wrong. I have 4 more devices and I would also set them up

again i ... can anyone tell me how to backup the BBMINER? so I can restore the default. I asked for a google but did not find it. now the temperature is great for OC but in the spring I will probably have to reduce the frequency and voltage ....

for now i deploy one device and i have 4 more ... so i do not spoil something ....

P.S.

and what is the default voltage? the frequency is from 568 MHz to 575 MHz ...

fanatic26_

full member

Activity: 294

Merit: 129

Quote from: boogiebl on December 09, 2018, 01:14:49 PM

Hi,

I did backup config before deploy on "upgrade" page.

if I now restore my backup on the same page, will everything be as before deploy?

No. That just backed up the user settings, pools and such.

It did not create a backup of your firmware.

boogiebl

newbie

Activity: 3

Merit: 0

Hi,

I did backup config before deploy on "upgrade" page.

if I now restore my backup on the same page, will everything be as before deploy?

alex1560

member

Activity: 67

Merit: 24

Quote from: behnam98 on November 25, 2018, 05:30:04 AM

how to work "Customize the fan speed percentage" item ?
i have t9+ , but my fan speed not change by change this item !!
i test 10 , 20 , .... , 150 and more for this field Huh

Hi, I have not tested that feature on T9+ unfortunately. Might be different because of the controller.

behnam98

newbie

Activity: 2

Merit: 0

how to work "Customize the fan speed percentage" item ?
i have t9+ , but my fan speed not change by change this item !!
i test 10 , 20 , .... , 150 and more for this field Huh

alex1560

member

Activity: 67

Merit: 24

Ya, it's actually the LPM which doesn't like overclocking on some boards, especially the 13.5 machines or older 14TH.

I plan on putting some more work into finding a solution for this in the following weeks, until then, the best solution for LPM is
the original firmware on bitmain without overclock.

There are some users which were lucky and it worked, so always test on a few machines before mass deployment.

sergw

member

Activity: 159

Merit: 12

Quote from: bitcoinore on November 20, 2018, 09:26:29 AM

Same here, seems the firmware is simply not stable for some reason Sad

yep, i had to rollback to original fw. maybe my S9 from feb-may 2017 batch not tested enough.

bitcoinore

newbie

Activity: 2

Merit: 0

Quote from: sergw on November 19, 2018, 06:59:46 AM

Hi, tested on 3 S9 13.5T, set 675 freq + 8.9V + asic boost, after ~2-3 hours on all miners 2 hashboards droped to 0, and miners run just on 4.5Th, any body faced the same?

Same here, seems the firmware is simply not stable for some reason Sad

sergw

member

Activity: 159

Merit: 12

Hi, tested on 3 S9 13.5T, set 675 freq + 8.9V + asic boost, after ~2-3 hours on all miners 2 hashboards droped to 0, and miners run just on 4.5Th, any body faced the same?

alex1560

member

Activity: 67

Merit: 24

Quote from: UknoWho on November 13, 2018, 03:51:22 AM

Hi Alex I con't open http：//torrent-miner.com/tools/bmminer-deploy-S9-T9+.zip
Would you please sent a email including bmminer-deploy-S9-T9+.zip and Antminer-S9-LPM-20181023_OC.tar.gz
My email [email protected]
Thank you

Hi, I updated the main link as I removed that file from the server, this is the latest deployer: http://torrent-miner.com/tools/Antminer-MassDeployer-v.1.0.zip
and here you can watch a video on how to use:
https://www.youtube.com/watch?v=XkB6ymB01c4

UknoWho

newbie

Activity: 2

Merit: 0

Hi Alex I con't open http：//torrent-miner.com/tools/bmminer-deploy-S9-T9+.zip
Would you please sent a email including bmminer-deploy-S9-T9+.zip and Antminer-S9-LPM-20181023_OC.tar.gz
My email [email protected]
Thank you

alex1560

member

Activity: 67

Merit: 24

Quote from: jfaubin on November 03, 2018, 10:24:28 PM

Hi Alex,

This last firmware not work with S9i. Do you have source code on your code? provide-me and i made a correction.

Regards.

J-F Aubin

Hi, make sure you flash the original firmware before applying this patch, may users had other overclocking mods which are
not allowing this one to work. You can either reset to factory or flash the autotune version for your miner.

There's no source code for this yet, I was able to disable fan check by modifying binary code and to overclock from the single board test.
Single board test code is available on bitmain github, and you apply same changes that I've applied on my video for bmminer.
The fan disable version is not made public, if offered only paid by PM or discord.

Good luck!

jfaubin

newbie

Activity: 16

Merit: 0

Quote from: alex1560 on October 25, 2018, 11:34:03 AM

[...]

Attention!!! S9 only.
http://torrent-miner.com/tools/Antminer-S9-LPM-20181023_OC.tar.gz

[...]

Hi Alex,

This last firmware not work with S9i. Do you have source code on your code? provide-me and i made a correction.

Regards.

J-F Aubin

thierry4wd

sr. member

Activity: 446

Merit: 347

Yes I already did what was needed have already debated theessess;) and I did everything well;) for proof your mod works very well on my S9 (proof that I know the install lol) but not on my T9 + ...

I wanted the kernel log for me, to understand what's wrong;)

alex1560

member

Activity: 67

Merit: 24

Quote from: thierry4wd on November 03, 2018, 08:42:05 AM

I did it but remember you had to replace my PIC32 making the boards out of use: s

I think you tried when the tool was not detecting which miner version it is, s9 or t9. The latest one will know which bmminer to copy.

Topic: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable (Read 23657 times)