Official CedarTec Topic - New ASIC [Scam?] - page 48.

mobodick

hero member

Activity: 840

Merit: 1000

Quote from: kernelpanic on April 12, 2013, 06:59:45 AM

Note in particular the square around the mounting hole in the lower right versus the circle in the lower left around the same area. Based on the FAQ below, that indicates the image was manipulated in at least the lower right, if not both. I know mounting holes are not important, I just mention the mounting holes because they are so blatant and easy to explain.

Look at the top of the ASICs and other areas as well, same is true.

The image is 600x400, surely no camera takes pics at that low res. Simply post the original high res version, put this to rest.

http://fotoforensics.com/analysis.php?id=fc8c4db78c9c97aee0b347d86d57b391b81f9916.334748

http://fotoforensics.com/faq.php

Forensics starts with actually using your eyes...

mobodick

hero member

Activity: 840

Merit: 1000

Quote from: segfault88 on April 11, 2013, 06:39:26 PM

On the picture of the PCB you posted - what are the through hole DIP chips, and why the heck would you be using through hole components:

This picture clearly shows that all asic 'chips' have exactly the same reflections and surface deformation.
This is impossible in real life. Every chip should have had a different pattern of light and dark surface areas. But they have identical patterns.

There is no doubt whatsoever that this is a fake photo and cedartec are liars.

mobodick

hero member

Activity: 840

Merit: 1000

Quote from: CedarTec on April 11, 2013, 05:33:52 AM

Like already said, we will take photos
from a other perspective/angle and will
show you that everything on the pcb is real.

Can you photoshop them like you did with the other photo?
Oh please, can you?
Photoshops are the best asic!

Minor Miner

legendary

Activity: 2478

Merit: 1020

Be A Digital Miner

Quote from: nathanrees19 on April 12, 2013, 03:45:33 AM

Almost all of the new ASICs are scams.

This makes me sad.

Currently the vast majority of old asics appear to be also.

kernelpanic

newbie

Activity: 51

Merit: 0

Note in particular the square around the mounting hole in the lower right versus the circle in the lower left around the same area. Based on the FAQ below, that indicates the image was manipulated in at least the lower right, if not both. I know mounting holes are not important, I just mention the mounting holes because they are so blatant and easy to explain.

Look at the top of the ASICs and other areas as well, same is true.

The image is 600x400, surely no camera takes pics at that low res. Simply post the original high res version, put this to rest.

http://fotoforensics.com/analysis.php?id=fc8c4db78c9c97aee0b347d86d57b391b81f9916.334748

http://fotoforensics.com/faq.php

http://fotoforensics.com/analysis.php?id=fc8c4db78c9c97aee0b347d86d57b391b81f9916.334748&fmt=ela

dtmcnamara

full member

Activity: 201

Merit: 100

Quote from: crisuch on April 11, 2013, 10:46:00 PM

Quote from: Phinnaeus Gage on April 11, 2013, 07:40:31 PM

Using or not using photoshop is not proof of nothing. Like Avalon previous to the shipment, there is not way to know if they are honest. The Cedartec team has answered many questions in this forum, and they sound convincing. Then I have decided take the risk and pay for pre-order. I hope that it will be a good decision. I will write to this forum about any news.

Used the same site above and inserted a picture taken straight from my phone...said it was photoshopped as well...not trying to back these guys up, but just saying that this program is not that reliable.

BR0KK

hero member

Activity: 784

Merit: 500

Quote from: crisuch on April 11, 2013, 10:46:00 PM

Quote from: Phinnaeus Gage on April 11, 2013, 07:40:31 PM

Using or not using photoshop is not proof of nothing. Like Avalon previous to the shipment, there is not way to know if they are honest. The Cedartec team has answered many questions in this forum, and they sound convincing. Then I have decided take the risk and pay for pre-order. I hope that it will be a good decision. I will write to this forum about any news.

YOU WERE WARNED ONCE ....

They dindn't anser any questions of value. Most like BFL...

dan99

sr. member

Activity: 406

Merit: 250

Quote from: CedarTec on April 11, 2013, 06:08:27 PM

Dear bitcointalk users,

we will produce so many asics as ordered,
our limit is 1000 asics.
Every left asic of the 1000 will be sold
after the shipment is done, but not every
asic of the left asics will be pre-produced.
We will think about the details when it is nearer the time,
first we must finish the pre-orders.

With best regards,

Your CedarTec Team.

Do You Accept Credit Card and Paypal? Do You accept Escrow if paying by bitcoin? if you do maybe they is more credibility in your business?

nathanrees19

full member

Activity: 196

Merit: 100

Almost all of the new ASICs are scams.

This makes me sad.

segfault88

newbie

Activity: 42

Merit: 0

Quote from: crisuch on April 11, 2013, 10:46:00 PM

Then I have decided take the risk and pay for pre-order. I hope that it will be a good decision. I will write to this forum about any news.

You're braver than me... Good luck, please update us with what happens.

crisuch

newbie

Activity: 42

Merit: 0

Quote from: Phinnaeus Gage on April 11, 2013, 07:40:31 PM

http://farm9.staticflickr.com/8244/8641942680_e6310bfbf3.jpg

Using or not using photoshop is not proof of nothing. Like Avalon previous to the shipment, there is not way to know if they are honest. The Cedartec team has answered many questions in this forum, and they sound convincing. Then I have decided take the risk and pay for pre-order. I hope that it will be a good decision. I will write to this forum about any news.

DarkPunk

member

Activity: 182

Merit: 10

Quote from: segfault88 on April 11, 2013, 07:35:33 PM

Quote from: DarkPunk on April 11, 2013, 06:53:18 PM

Not that I think these guys are legit, but 3 possible reasons:

Nothing is really proven anyway.

All of your answers are reasonable, and similar to what I was thinking. However, I wanted to see how/if they responded. Not that it would have proved anything at all as you mention. But it could have given some useful red flags if they said something blatantly wrong or stupid like - the RF connector is chaining units together or something.

Oh well, back to waiting to see if something believable comes out of these guys or kncminer.

They probably would have just avoided the question if they thought they couldn't answer it correctly.

Phinnaeus Gage

legendary

Activity: 1918

Merit: 1570

Bitcoin: An Idea Worth Spending

segfault88

newbie

Activity: 42

Merit: 0

Quote from: DarkPunk on April 11, 2013, 06:53:18 PM

Not that I think these guys are legit, but 3 possible reasons:

Nothing is really proven anyway.

All of your answers are reasonable, and similar to what I was thinking. However, I wanted to see how/if they responded. Not that it would have proved anything at all as you mention. But it could have given some useful red flags if they said something blatantly wrong or stupid like - the RF connector is chaining units together or something.

Oh well, back to waiting to see if something believable comes out of these guys or kncminer.

botlove

newbie

Activity: 49

Merit: 0

i've seen that picture somewhere before, i think. so what I suggest... take a second picture of that same persons finger and post it for me, and i'll make my decision

DarkPunk

member

Activity: 182

Merit: 10

Quote from: segfault88 on April 11, 2013, 06:39:26 PM

Not that I think these guys are legit, but 3 possible reasons:

It's a dev baord provided by the ASIC manufacture, so it just covers all the bases.
RF Antenna is for Wifi, the PCI-e x1 is for a low-power video card for readouts (this board would suggest a self-contained miner, no PC required).
It's a dev board they had laying around and placed / photoshop'd chips on top.

The 40-pin chips could be PICs/AVRs, I can think of a dozen reasons why they might want microprocessors running along side the ASICs.

Nothing is really proven anyway.

segfault88

newbie

Activity: 42

Merit: 0

My main questions at the moment are:

On the picture of the PCB you posted - what are the through hole DIP chips, and why the heck would you be using through hole components:
http://i.imgur.com/etIHsAv.jpg

What is with the RF connector? What is that for?
http://i.imgur.com/cicaABF.jpg

What is the socket for?
http://i.imgur.com/ey23ZHo.jpg

What package is this supposed to be?
http://www.cedartec.net/images/gallery/chip.jpg
Please post a picture of the underside, and the side so that some of the top and some of the bottom is shown. Why are the edges rounded like that? How is heat going to be dissipated?

CedarTec

newbie

Activity: 16

Merit: 0

Dear bitcointalk users,

we will produce so many asics as ordered,
our limit is 1000 asics.
Every left asic of the 1000 will be sold
after the shipment is done, but not every
asic of the left asics will be pre-produced.
We will think about the details when it is nearer the time,
first we must finish the pre-orders.

With best regards,

Your CedarTec Team.

firefop

sr. member

Activity: 420

Merit: 250

Quote from: crisuch on April 11, 2013, 02:00:34 PM

What would happen if you don't reach 1000 pre-orders? Do you have to reach a minimum quantity of pre-orders to begin mass production?

The same that will eventually happen if they do... they'll vanish with whatever profit they were able to scam.

crisuch

newbie

Activity: 42

Merit: 0

What would happen if you don't reach 1000 pre-orders? Do you have to reach a minimum quantity of pre-orders to begin mass production?

Topic: Official CedarTec Topic - New ASIC [Scam?] - page 48. (Read 43068 times)