October 02, 2024, 02:28:25 PM

Welcome, Guest

News: Latest Bitcoin Core release: 27.1 [Torrent]

Bitcoin Forum>Bitcoin>Mining>Mining software (miners)

Pages:

«
43
44
45
46
47
48
49
50
51
52
»

Author

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 48. (Read 5805508 times)

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: jonnybravo0311 on April 29, 2015, 04:49:55 PM

Hey -ck and kano... there's a version of cgminer floating around based on 4.7 with a patch by nicehash to support extranonce subscriptions. it is described here: https://www.nicehash.com/index.jsp?p=software#cgminer

This is an excerpt from the README:

Quote

Bitmain AntMiner S3 binary with cgminer 4.7 and extranonce.subscribe

- sourced from: https://github.com/ckolivas/cgminer
- with patch from NiceHash https://github.com/nicehash/cgminer-ckolivas/commit/4e9c7ce68ed91ec9189d83c35b2237aca65f2b7f
- with Bitmaintech's AntMiner S3 driver

With extranonce.subscribe used with nicehash.com & westhash.com

My question is based on the part I bolded in the quote. If I update my S3s to use this patch, does it also include the work you guys did to ensure the S3 doesn't throw away stale work that could solve blocks for p2pool?

Thanks in advance!

Extranonce support is a non standard stratum extension designed by nicehash just for nicehash to use to support their multicoin multipool proxy switching pseudo-pool. We have no interest in putting support for one service like that in mainline cgminer. Officially provided source and binaries by the cgminer team do not have extranonce support. Their patch also appears to introduce some kind of bug that prevents workers from switching away from a dead pool.

jonnybravo0311

legendary

Legendary level

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

Hey -ck and kano... there's a version of cgminer floating around based on 4.7 with a patch by nicehash to support extranonce subscriptions. it is described here: https://www.nicehash.com/index.jsp?p=software#cgminer

This is an excerpt from the README:

Quote

Bitmain AntMiner S3 binary with cgminer 4.7 and extranonce.subscribe

- sourced from: https://github.com/ckolivas/cgminer
- with patch from NiceHash https://github.com/nicehash/cgminer-ckolivas/commit/4e9c7ce68ed91ec9189d83c35b2237aca65f2b7f
- with Bitmaintech's AntMiner S3 driver

With extranonce.subscribe used with nicehash.com & westhash.com

My question is based on the part I bolded in the quote. If I update my S3s to use this patch, does it also include the work you guys did to ensure the S3 doesn't throw away stale work that could solve blocks for p2pool?

Thanks in advance!

JoseMendez

newbie

Activity: 13

Merit: 0

Hi. Thank you for your effort developing cgminer. Im interested in working with cgminer to develop some programs (like a GUI) and I want to ask you to questions:

I just ordered today a Usb miner but I want to start right now to develop but I cant run Cgminer, there is part in code which I can rewrite or some other way to run 4.9.1 on testnet without a USB miner?

My next question is if I start to develop with an older version (which suports GPU mining) via API, my program would be compatible with 4.9.1 when I get my USB miner?

Thank you for your time.

kano

legendary

Legendary level

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Update from my kano.is pool thread.

https://bitcointalksearch.org/topic/m.11191279

Quote from: kano on April 25, 2015, 07:20:55 AM

Quote from: kano on April 25, 2015, 03:57:03 AM

Quote from: bitwitt on April 24, 2015, 10:50:13 PM

Quote from: bitwitt on April 23, 2015, 08:01:21 PM

Quote from: kano on September 23, 2014, 12:32:39 AM

Quote from: norgan on September 22, 2014, 08:22:33 PM

Very interesting. I may point some has at this soon as I am currently back in "testing the waters mode". p2pool has been good to me and I've roi'd on 2 s1's but starting to see non-paying blocks. I'll be over shortly, have a beer waiting for me Wink

Wink

Well if I can update the S1/S2/S3 driver in a few days hopefully more of the S's will join too

I don't understand ?

I have had s1 s2 and s3 s here and they work fine. Why do you need a new driver?

I still have s2s and s3s here.

Kano
Is there better software I should be running on Antminers? I would like to make sure I'm getting the most from hardware.

at this point in mining anything that helps could make the difference of tuning them off or let them run .

No, I asked bitmain to fund (10BTC) doing work on the S1/S2/S3 and they said no they are too old and wont waste money on them.
...

Wow, gotta say, totally awesome.

Bitmain of course dropped the ball on this and have given up on anyone who bought their S1/S2/S3 saying they don't care.

However, someone (who wants to remain anonymous) has sent me 10BTC and asked me to do the S1/S2/S3 work.

Guess I'll be spending the time on this over the next 2 weeks that I was asking to do and get the S1/S2 updated and sort out some p2pool issues, and also merge a working S3 into cgminer master

(and of course dust off my old S1/S2 and get them working again)

The kano.is pool problems (and a backend ckdb change I've been working on) have been taking a lot of my (and of course -ck's) time, but I think I can handle both (if I ignore everything else Tongue

Tongue

)

Good news

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: Buchi-88 on April 19, 2015, 09:27:15 AM

THX, is the best Cgminer for the Bitfury sticks the 4.3.3?

If that's the one that works best for you, probably unfortunately. The only stick I have left that still works is a BXM and that works fine with the latest, so I would be hoping that the latest is working best with the older hardware that I no longer have/use, but that's not always the case due to subtle interactions between drivers. It's very hard to maintain support for hardware that you no longer have (usually the hardware has died or it became so inefficient that no one was still running it).

Buchi-88

legendary

Legendary level

Activity: 3934

Merit: 2634

Quote from: -ck on April 19, 2015, 04:24:00 AM

Quote from: Buchi-88 on April 19, 2015, 03:37:08 AM

Quote from: -ck on April 18, 2015, 07:05:55 PM

No, that should work to hotplug the bifury. Is there a reason you're restricting it to 4 devices with that in your config?

Hi no there is no reason for the restriction, but at the Bfx2 miners has performed flawlessly? For the BiFury i must always make the Hotplug by hand? Then the Cgminer find the BXF Fury?

No, as I said it should work. I have no idea why it doesn't, but it's also impossible to debug issues with deprecated hardware long out of commission unfortunately when there's no reason for them to start misbehaving when they didn't previously. Perhaps try an older cgminer.

THX, is the best Cgminer for the Bitfury sticks the 4.3.3?

regards

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: Buchi-88 on April 19, 2015, 03:37:08 AM

Quote from: -ck on April 18, 2015, 07:05:55 PM

No, that should work to hotplug the bifury. Is there a reason you're restricting it to 4 devices with that in your config?

Hi no there is no reason for the restriction, but at the Bfx2 miners has performed flawlessly? For the BiFury i must always make the Hotplug by hand? Then the Cgminer find the BXF Fury?

No, as I said it should work. I have no idea why it doesn't, but it's also impossible to debug issues with deprecated hardware long out of commission unfortunately when there's no reason for them to start misbehaving when they didn't previously. Perhaps try an older cgminer.

Buchi-88

legendary

Legendary level

Activity: 3934

Merit: 2634

Quote from: -ck on April 18, 2015, 07:05:55 PM

Quote from: Buchi-88 on April 18, 2015, 05:28:08 PM

have anyone the same problem with the combination of these miners:

3 x BXM (BFx2)
1 x BXF (BiFury)

In the config i have these command, ("usb" : ":4",), but Cgminer doesn't recognized the BXF when i restart the Cgminer, theni must unplugged and then plug in the BiFury??

Then starts the BiFury the mining? No Hotplugin by the BXF?

No, that should work to hotplug the bifury. Is there a reason you're restricting it to 4 devices with that in your config?

Hi no there is no reason for the restriction, but at the Bfx2 miners has performed flawlessly? For the BiFury i must always make the Hotplug by hand? Then the Cgminer find the BXF Fury?

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: Buchi-88 on April 18, 2015, 05:28:08 PM

have anyone the same problem with the combination of these miners:

3 x BXM (BFx2)
1 x BXF (BiFury)

In the config i have these command, ("usb" : ":4",), but Cgminer doesn't recognized the BXF when i restart the Cgminer, theni must unplugged and then plug in the BiFury??

Then starts the BiFury the mining? No Hotplugin by the BXF?

No, that should work to hotplug the bifury. Is there a reason you're restricting it to 4 devices with that in your config?

Buchi-88

legendary

Legendary level

Activity: 3934

Merit: 2634

Hello,

have anyone the same problem with the combination of these miners:

3 x BXM (BFx2)
1 x BXF (BiFury)

In the config i have these command, ("usb" : ":4",), but Cgminer doesn't recognized the BXF when i restart the Cgminer, theni must unplugged and then plug in the BiFury??

Then starts the BiFury the mining? No Hotplugin by the BXF?

regards

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: os2sam on April 09, 2015, 09:16:02 PM

Sounds good. I sent a small donation for the help and support.

Much appreciated, thanks

Development has certainly been quiet of late, more representative of the mining landscape than anything else.

os2sam

legendary

Legendary level

Activity: 3583

Merit: 1094

Think for yourself

Quote from: -ck on April 09, 2015, 12:03:22 AM

Quote from: os2sam on April 06, 2015, 09:57:11 PM

Quote from: -ck on March 21, 2015, 07:18:07 PM

Quote from: os2sam on March 21, 2015, 06:55:07 PM

Edit: So do think this is a fix or a preliminary test? Also what is the driver instance name for the --usb options?
Thanks a bunch, again.

This code should just become part of the next release. It's still all under the same device name for all bflsc driver devices so BAS. The code was never rewritten to account for variants detected after the fact and black/whitelist them (it would be a massive rewrite and manufacturers have all but made this venture worthless).

-ck,
Did this fix for the Monarch's make into the git tree yet?
Thanks,
Sam

Yes it did, shortly after I put up the binary for you.

Sounds good. I sent a small donation for the help and support.
Thanks,
Sam

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: os2sam on April 06, 2015, 09:57:11 PM

Quote from: -ck on March 21, 2015, 07:18:07 PM

Quote from: os2sam on March 21, 2015, 06:55:07 PM

Edit: So do think this is a fix or a preliminary test? Also what is the driver instance name for the --usb options?
Thanks a bunch, again.

This code should just become part of the next release. It's still all under the same device name for all bflsc driver devices so BAS. The code was never rewritten to account for variants detected after the fact and black/whitelist them (it would be a massive rewrite and manufacturers have all but made this venture worthless).

-ck,
Did this fix for the Monarch's make into the git tree yet?
Thanks,
Sam

Yes it did, shortly after I put up the binary for you.

-ck

legendary

Legendary level

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: altcointalk14 on April 07, 2015, 11:41:34 AM

Sorry to interrupt, I probably should have posted in this thread.

Can anyone help answer the cgminer messages I was curious about that I originally posted here:

https://bitcointalksearch.org/topic/did-i-just-find-a-block-1016272

please read down thru my reply post to Hugs, Thank you!

Cgminer doesn't officially support mining altcoins or multiple coins concurrently. Seek help from altcoin forums please.

altcointalk14

sr. member

Activity: 751

Merit: 253

Sorry to interrupt, I probably should have posted in this thread.

Can anyone help answer the cgminer messages I was curious about that I originally posted here:

https://bitcointalksearch.org/topic/did-i-just-find-a-block-1016272

please read down thru my reply post to Hugs, Thank you!

os2sam

legendary

Legendary level

Activity: 3583

Merit: 1094

Think for yourself

Quote from: -ck on March 21, 2015, 07:18:07 PM

Quote from: os2sam on March 21, 2015, 06:55:07 PM

Edit: So do think this is a fix or a preliminary test? Also what is the driver instance name for the --usb options?
Thanks a bunch, again.

This code should just become part of the next release. It's still all under the same device name for all bflsc driver devices so BAS. The code was never rewritten to account for variants detected after the fact and black/whitelist them (it would be a massive rewrite and manufacturers have all but made this venture worthless).

-ck,
Did this fix for the Monarch's make into the git tree yet?
Thanks,
Sam

hiima

member

Activity: 112

Merit: 10

Quote from: twebit on April 05, 2015, 05:40:54 PM

Quote from: hiima on April 05, 2015, 05:35:30 PM

Quote from: twebit on April 05, 2015, 05:22:51 PM

Quote from: hiima on April 05, 2015, 05:14:29 PM

Quote from: os2sam on April 05, 2015, 05:08:45 PM

Quote from: hiima on April 05, 2015, 05:03:35 PM

I'm plugging into the back of my tower, so directly, should be USB 2.0, it's not blue so pretty sure not 3.0.

Ok, as a last straw you can try going through a USB 2.0 hub anyway and see what happens. What power supply are you using to power the miner? Are all the fans spinning up?

I don't have a hub lying around so I'll have to get one and try. My PSU is an ULTRA X4 750W. 12V, 56A, all fans spinning up.

Does it work right in bfl's bfgminer?

No, it spews errors when I run bfgminer, that's why I'm trying cgminer, comes up as BFL 0. I'll try running in a bit with FTDI driver in bfgminer custom and show a screen.

Oh OK I was using cgminer from a working in bfgminer. If you're using the custom version of bfgminer supplied by bfl and you have enough power. I'm using 1600w power supplies with enough amps. Then I don't know what else I can help you with

This spews out and repeats in bfgminer along with my monarch shutting off.

twebit

member

Activity: 91

Merit: 10

Quote from: hiima on April 05, 2015, 05:35:30 PM

Quote from: twebit on April 05, 2015, 05:22:51 PM

Quote from: hiima on April 05, 2015, 05:14:29 PM

Quote from: os2sam on April 05, 2015, 05:08:45 PM

Quote from: hiima on April 05, 2015, 05:03:35 PM

I'm plugging into the back of my tower, so directly, should be USB 2.0, it's not blue so pretty sure not 3.0.

Ok, as a last straw you can try going through a USB 2.0 hub anyway and see what happens. What power supply are you using to power the miner? Are all the fans spinning up?

I don't have a hub lying around so I'll have to get one and try. My PSU is an ULTRA X4 750W. 12V, 56A, all fans spinning up.

Does it work right in bfl's bfgminer?

No, it spews errors when I run bfgminer, that's why I'm trying cgminer, comes up as BFL 0. I'll try running in a bit with FTDI driver in bfgminer custom and show a screen.

Oh OK I was using cgminer from a working in bfgminer. If you're using the custom version of bfgminer supplied by bfl and you have enough power. I'm using 1600w power supplies with enough amps. Then I don't know what else I can help you with

hiima

member

Activity: 112

Merit: 10

Quote from: os2sam on April 05, 2015, 05:20:53 PM

Quote from: hiima on April 05, 2015, 05:14:29 PM

Quote from: os2sam on April 05, 2015, 05:08:45 PM

Quote from: hiima on April 05, 2015, 05:03:35 PM

I'm plugging into the back of my tower, so directly, should be USB 2.0, it's not blue so pretty sure not 3.0.

Ok, as a last straw you can try going through a USB 2.0 hub anyway and see what happens. What power supply are you using to power the miner? Are all the fans spinning up?

I don't have a hub lying around so I'll have to get one and try. My PSU is an ULTRA X4 750W. 12V, 56A, all fans spinning up.

dunno, sounds like bad hardware to me. You may want to contact the Manufacture's support.

Kinda what I thought. I'll try contacting support and RMA for a replacement.

hiima

member

Activity: 112

Merit: 10

Quote from: twebit on April 05, 2015, 05:22:51 PM

Quote from: hiima on April 05, 2015, 05:14:29 PM

Quote from: os2sam on April 05, 2015, 05:08:45 PM

Quote from: hiima on April 05, 2015, 05:03:35 PM

I'm plugging into the back of my tower, so directly, should be USB 2.0, it's not blue so pretty sure not 3.0.

Ok, as a last straw you can try going through a USB 2.0 hub anyway and see what happens. What power supply are you using to power the miner? Are all the fans spinning up?

I don't have a hub lying around so I'll have to get one and try. My PSU is an ULTRA X4 750W. 12V, 56A, all fans spinning up.

Does it work right in bfl's bfgminer?

No, it spews errors when I run bfgminer, that's why I'm trying cgminer, comes up as BFL 0. I'll try running in a bit with FTDI driver in bfgminer custom and show a screen.

Pages:

«
43
44
45
46
47
48
49
50
51
52
»

Bitcoin Forum>Bitcoin>Mining>Mining software (miners)

Jump to: