Hello!
After starting the xpmclient_v9.4.1 hanging message: Connecting to frontend: xpmforall.org:6666 and nothing happens
Please, help.
Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 48. (Read 110186 times)
why xpmforall.org server is re-starting very frequently? This makes our workers less efficient.
Because a blockchain synchronization problem when pool node works a long time with a very high block rate. Without restarting other miners (such as ypool) get too much orphans it's not good for primecoin network.With periodic restarting your workers lost about 0,1% XPM / day, not much?
eXtremal, why xpmforall.org server is re-starting very frequently? This makes our workers less efficient.
I`m using good old Drivers only without ccc 14.2 beta 1.3
Voltage gpu and mem clock can be changed from AB and from config. Just don`t put some strange frequency in config.txt like 750 mhz for mem it will raise memory to max. 1600 mhz in my case, Asus 280x dc2t
Voltage gpu and mem clock can be changed from AB and from config. Just don`t put some strange frequency in config.txt like 750 mhz for mem it will raise memory to max. 1600 mhz in my case, Asus 280x dc2t
And have a miner for CPU Primecoin?
Yes, for other pools (ypool, etc). Difficulty too high for CPU mining now.Miner does not work
Error: -11
I think you use Catalyst 13.x, install 14.4 drivers.Error: -11
Install the driver 14.4. Now the miner works.
Question: so in the config file it has "-1" as meaning don't change for the corefreq, etc. What if I want to change these? What value do I add? I tried changing the corefreq in Afterburner, but it shows up lower when the program starts.
Good evening. My English is bad. Please izveinit me for Google translator
I have a problem, I connect their rigs to your pool.
But only one bullet shows up to 2 or rigs. The rest is not visible in the statistics ...
program miners working on drilling rigs. Shows accepted and CPD.
What could be the problem?
Please help ... And then on ypool payment I do not like ...
I have a problem, I connect their rigs to your pool.
But only one bullet shows up to 2 or rigs. The rest is not visible in the statistics ...
program miners working on drilling rigs. Shows accepted and CPD.
What could be the problem?
Please help ... And then on ypool payment I do not like ...
And have a miner for CPU Primecoin?
Yes, for other pools (ypool, etc). Difficulty too high for CPU mining now.Miner does not work
Error: -11
I think you use Catalyst 13.x, install 14.4 drivers. Error: -11
Miner does not work
Error: -11
Error: -11
And have a miner for CPU Primecoin?
I used several AMD gpu's on my rigs. I only mine on new coins early on with them. I've heard a lot of good things on nvidia cards for mining too.
gr8 work, works out of the box for 4x 7950 and 1x 290x (with 15.5 beta driver just fine 14CPD), would be nice if mining calculator had option to include the orphan rate in last 24h so ppl would not moan on low profit btw...
miner is good it looks like it trashing the GPU at the max, power usage looks even more then with scrypt mining or somewhere there
miner is good it looks like it trashing the GPU at the max, power usage looks even more then with scrypt mining or somewhere there
Quote
- Which driver will give me the best performance?
Catalyst 14.4 - 14.7.Quote
- Can I also use a CPU miner while running this program? My experience in the past is that CPU miners really cut into the performance of GPU miners. Any tips for this?
You can try and post results here.Quote
I hear my fans turn down and then up when new work comes in. Is this normal? The Claymore miner doesn't seem to do this.
Normal time for getting new work equals ping to xpmforall.org:Code:
Work received: height=1107707 diff=10.828171 latency=39ms
But sometimes pool answers to client with some delay:Code:
Work received: height=1107696 diff=10.828003 latency=212ms
Latency more than 1 second is enough to decrease GPU temperature and fan speed. Use manual control for fan speed (line "fanspeed" in config.txt file). New version 9.4 with next speedup: https://www.dropbox.com/s/ny027u62vbeb2u5/xpmclient_v9.4.tar.gz?dl=0
Quote
Radeon R9 290X @ 1000/1250 (stock) - 14.9 CPD
R9 290X @ 1040/1500 - 15.35CPD
Radeon R9 290 @ 947/1250 (stock) - 13.2 CPD
Radeon R9 280X @ 1000/1250 (stock) - 9.35 CPD
R9 280X @ 1100/1500 - 10.25CPD
R9 290X @ 1040/1500 - 15.35CPD
Radeon R9 290 @ 947/1250 (stock) - 13.2 CPD
Radeon R9 280X @ 1000/1250 (stock) - 9.35 CPD
R9 280X @ 1100/1500 - 10.25CPD
I have a R9 290 and have a few questions:
- Which driver will give me the best performance?
- Can I also use a CPU miner while running this program? My experience in the past is that CPU miners really cut into the performance of GPU miners. Any tips for this?
- I hear my fans turn down and then up when new work comes in. Is this normal? The Claymore miner doesn't seem to do this.
Thank you.
14.7 driver set
280X = 7.5 CPD
How to get 10 CPD ?
If you use Windows, you can try set GPU, memory clock and powertune with MSI afterburner, or try different catalyst version (14.6, 14.4). 280X = 7.5 CPD
How to get 10 CPD ?
14.7 driver set
280X = 7.5 CPD
How to get 10 CPD ?
280X = 7.5 CPD
How to get 10 CPD ?
Hello. I'm using the 9.4.1 version of the miner. 8.1 Windows 64 Driver 14.12
I get 5.6 CPD to 280X (1100\1500) , config file by default. What am I doing wrong? Why such a low speed?
Use 14.4 - 14.7 drivers, 14.12 60% slower.I get 5.6 CPD to 280X (1100\1500) , config file by default. What am I doing wrong? Why such a low speed?
I will add this to first post.
Hello. I'm using the 9.4.1 version of the miner. 8.1 Windows 64 Driver 14.12
I get 5.6 CPD to 280X (1100\1500) , config file by default. What am I doing wrong? Why such a low speed?
I get 5.6 CPD to 280X (1100\1500) , config file by default. What am I doing wrong? Why such a low speed?
Quote
on the calculator says 300 xpm, actually 2 times less. Why?
1. Too high orphan rate (more than 10%) last 24 hours (ypool and solo mining have same problem, low difficulty and high network speed).2. Calculator uses 30/1 10ch/11ch ratio. Now 5433/150=36.22, -20% pool luck.
I have checked payouts to other adresses, all have payouts ~calculator - 30% (some users have 170-190CPD and payouts 264-304 XPM). Now you mine 15 hours, but compare your payments with "XPM per day" value.
Quote
The paid starting to increasing, bug seems to be a little slowly.
Pool can't pay instantly with current block rate (1200 on xpmforall and 800 on ypool, normal rate is 1440 totally) can be 3-4 hours delay.
Hi eXtremal ,
The paid starting to increasing, bug seems to be a little slowly.
The paid starting to increasing, bug seems to be a little slowly.
Jump to: