on the calculator says 300 xpm, actually 2 times less. Why?
https://i.imgur.com/7Y2Mv9A.png
Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 49. (Read 110186 times)
Hi eXtremal ,
I had some balance (more than 4 xpm), but would not become to paid.
Could you check if any wrong on xpmforall?
I had some balance (more than 4 xpm), but would not become to paid.
Could you check if any wrong on xpmforall?
Quote
1104724 b0aal3e6e....4bl8619d8 14/06/15 15:46:52 9 860000000
1104723 b7509cdb....3e6791518 14/06/15 15:46:11 10 860000000
These blocks are orphans on ypool, if you see blockchain, you find blocks mined by xpmforall.org 1104723 b7509cdb....3e6791518 14/06/15 15:46:11 10 860000000
Hello ,
eXtremal
http://mining.ypool.net/xpm/stats_blocks
1104724 fan1981 8.600 457973.58 2015-06-14 15:47:15 Confirmations left: 998
1104723 DARTAN 8.600 462977.03 2015-06-14 15:46:18 Confirmations left: 997
http://xpmforall.org/
1104724 b0aal3e6e....4bl8619d8 14/06/15 15:46:52 9 860000000
1104723 b7509cdb....3e6791518 14/06/15 15:46:11 10 860000000
eXtremal
http://mining.ypool.net/xpm/stats_blocks
1104724 fan1981 8.600 457973.58 2015-06-14 15:47:15 Confirmations left: 998
1104723 DARTAN 8.600 462977.03 2015-06-14 15:46:18 Confirmations left: 997
http://xpmforall.org/
1104724 b0aal3e6e....4bl8619d8 14/06/15 15:46:52 9 860000000
1104723 b7509cdb....3e6791518 14/06/15 15:46:11 10 860000000
Got this and no further question now, please keep research for Nvidia solution, hope it can be improve performance and release soon 
Does it support Nvidia GK104 GPU? if so, do you mid for release first version to support Nvidia ?
GK104 not supported, miner works only with Maxwell GPUs (750Ti, GTX970, GTX980, Titan X).
Does it support Nvidia GK104 GPU? if so, do you mind for release first version to support Nvidia ?
or let me know if you want to know the executing result on GK104 GPU, thanks.
or let me know if you want to know the executing result on GK104 GPU, thanks.
Hi, is there still plan to support Nvidia by v10?
I have unfinished miner for NVidia 750Ti / GTX970 / GTX980, but performance too low compare to AMD GPUs (~6 CPD on GTX970 and ~7.5 CPD on GTX980, it's 1/2 of R9 290X speed).
Hi, is there still plan to support Nvidia by v10?
where the wallet is downloaded? or working directly on the exchange?
http://primecoin.io/downloads.phpYou also can try use address from exchange (Cryptsy or other), it must work.
where the wallet is downloaded? or working directly on the exchange?
Update.
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
What drivers on r9 290? I only 13.8 have ....my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
14.12 omega drivers.
on 7950 the same but i get only 5.3 , with claymore i get 7,3 same clocks...
have you tweaked any settings in the conf?
Update.
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
What drivers on r9 290? I only 13.8 have ....my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
14.12 omega drivers.
on 7950 the same but i get only 5.3 , with claymore i get 7,3 same clocks...
have you tweaked any settings in the conf?
Update.
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
What drivers on r9 290? I only 13.8 have ....my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
14.12 omega drivers.
on 7950 the same but i get only 5.3 , with claymore i get 7,3 same clocks...
Update.
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
What drivers on r9 290? I only 13.8 have ....my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
14.12 omega drivers.
on 7950 the same but i get only 5.3 , with claymore i get 7,3 same clocks...
Update.
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
What drivers on r9 290? I only 13.8 have .... my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
Update.
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
my r9 290 mines away at 14.2 CPD (1000/1300)
I solved the throttling on 7950,seems it is hitting a wattage wall.
However at 1000/1550 the card gets only 5.3 CPD is this normal for a 7950, I thought it should be over 8 CPD
I am test running it on 7950 1150/1550 how much cpd should I expect?
EDIT
unfortunately the card clocks fluctuate as well as usage and CPD stays at 5.5...
how can i stop usage fluctuation?
EDIT
unfortunately the card clocks fluctuate as well as usage and CPD stays at 5.5...
how can i stop usage fluctuation?
But in my opinion, CUDA is simply a lot easier and nicer to code with.
For me not so much difference.But some NVidia features not accessible through OpenCL, for example http://acceleware.com/blog/keplers-shuffle-instruction
NVidia GPUs have some features accessible only from CUDA.. may be X11 and other miners uses itAssuming XPM uses bignum stuff - I'm pretty sure it does, but I've barely looked at the code - CUDA should provide a speedup, if done correctly. Might need PTX assembly, though.
PTX assembly available in OpenCL too.https://developer.nvidia.com/opencl - see "Using Inline PTX with OpenCL" example.
Can it work well on 5970 GPU-s?
It is working with Claymore miner 3x 5970 only 11cpd any driver any version of Claymore miner!!
I have kernel for HD5xxx GPUs, but this GPU not suitable for XPM mining, too low speed compare to GCN HD7xxx & R9 2xx cards. It is working with Claymore miner 3x 5970 only 11cpd any driver any version of Claymore miner!!
Jump to: