win ? 
sometimes win , sometimes loose ...
Topic: Optiminer/Equihash 2.1.0 supporting Zcash, Bitcoin Gold, Minexcoin, Zero.. - page 17. (Read 35222 times)
November 14, 2017, 05:31:15 PM
November 14, 2017, 05:23:46 PM
win ?
November 14, 2017, 05:06:50 PM
I've noticed that the miner consumes continiuesly all avaliable memory and than when it ends, the system hangs.
I didn't notice no memory leak. Code:
top - 23:07:33 up 5:48, 3 users, load average: 8.65, 8.66, 8.59
Tasks: 210 total, 3 running, 207 sleeping, 0 stopped, 0 zombie
%Cpu(s): 82.3 us, 17.6 sy, 0.0 ni, 0.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 8043660 total, 2889492 used, 5154168 free, 53236 buffers
KiB Swap: 0 total, 0 used, 0 free. 1726772 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7273 ethos 20 0 0.098t 2.038g 1.926g S 376.0 26.6 353:05.12 optiminer-zcash
2.038g RES seems rather high usage. Is that from the beginning like that? What cards? What driver?
November 14, 2017, 03:08:39 PM
I've noticed that the miner consumes continiuesly all avaliable memory and than when it ends, the system hangs.
I didn't notice no memory leak. Code:
top - 23:07:33 up 5:48, 3 users, load average: 8.65, 8.66, 8.59
Tasks: 210 total, 3 running, 207 sleeping, 0 stopped, 0 zombie
%Cpu(s): 82.3 us, 17.6 sy, 0.0 ni, 0.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 8043660 total, 2889492 used, 5154168 free, 53236 buffers
KiB Swap: 0 total, 0 used, 0 free. 1726772 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7273 ethos 20 0 0.098t 2.038g 1.926g S 376.0 26.6 353:05.12 optiminer-zcash
November 14, 2017, 10:50:05 AM
I've noticed that the miner consumes continiuesly all avaliable memory and than when it ends, the system hangs.
November 14, 2017, 05:53:19 AM
If you have stability problems please make sure that the cards do not overheat. Try to reduce the mem/core clocks.
I was running stock clocks. Card temps are 40-55c.Quote
All that the CPU does is verify the hash of the found equihash solutions. Because of the extreme solution rate achieved with equihash96/5 on multi-card rigs this by itself uses a significant amount of CPU resources. Higher intensity should reduce CPU usage a bit (fewer opencl calls needed).
I tried that by the way (i 128), didn't help; The miner still hangs the system. ps: what's the max intensity value accepted by miner? set it to 256 just now, let's see how long will it take before hang.
Update2: hanged after 5h. intensity increased to 384. cpu load is still high (3 cores 100% load) and it's always like that, regardless of solution rate.
November 14, 2017, 05:16:51 AM
its a closed source miner, exactly like the previous versions
November 14, 2017, 05:14:51 AM
hello,
where i can find the source code for this miner ?
where i can find the source code for this miner ?
The link is in the first post.
https://github.com/Optiminer/OptiminerEquihash
there is no source code in that repository .
November 14, 2017, 05:13:15 AM
hello,
where i can find the source code for this miner ?
where i can find the source code for this miner ?
The link is in the first post.
https://github.com/Optiminer/OptiminerEquihash
November 14, 2017, 05:06:55 AM
hello,
where i can find the source code for this miner ?
where i can find the source code for this miner ?
November 14, 2017, 03:17:07 AM
Minimum SM version is 61 for Nvidia cards. So, only never cards are supported at the moment.
Windows version will take a bit more time, probably in a month.
If you have stability problems please make sure that the cards do not overheat. Try to reduce the mem/core clocks.
All that the CPU does is verify the hash of the found equihash solutions. Because of the extreme solution rate achieved with equihash96/5 on multi-card rigs this by itself uses a significant amount of CPU resources. Higher intensity should reduce CPU usage a bit (fewer opencl calls needed).
Windows version will take a bit more time, probably in a month.
If you have stability problems please make sure that the cards do not overheat. Try to reduce the mem/core clocks.
All that the CPU does is verify the hash of the found equihash solutions. Because of the extreme solution rate achieved with equihash96/5 on multi-card rigs this by itself uses a significant amount of CPU resources. Higher intensity should reduce CPU usage a bit (fewer opencl calls needed).
November 13, 2017, 06:38:02 PM
any eta on a Windows version?
November 13, 2017, 12:25:56 PM
I just tried the miner at work and I get the following error on Ubuntu16:
[GPU0] Device info: {"id": "0/0" "name": "GeForce GT 730" "platform": "Nvidia" "driver": "387.12"}
ptxas fatal : SM version specified by .target is higher than default SM version assumed
Any ideas? I cannot test on my GTX1070 as I am on Windows on all my rigs
[GPU0] Device info: {"id": "0/0" "name": "GeForce GT 730" "platform": "Nvidia" "driver": "387.12"}
ptxas fatal : SM version specified by .target is higher than default SM version assumed
Any ideas? I cannot test on my GTX1070 as I am on Windows on all my rigs
It has to do with SM version being too low. But I am still waiting for the dev to confirm this. I had the same problem with GTX 560 Ti, which works for mining Bitcoin Gold for example with EWBF Cuda Miner 0.3.4b BTG. Of course the hashrate what I get is desperate
November 13, 2017, 11:33:17 AM
Quote
Is it faster then mxMiner in 10 times???!!!
I haven't tried mxminer on these gpus. But, I was using mxminer2.0 on my windows machine which is i7-6850K (@4.2/3.8gHz AVX)+GTX1080 -> 12 Threads + CUDA (Intensity 128) = 1.4-1.7kSol, yeah, optiminer just creams mxminer. If only it was more stable and less cpu dependent it would be the best miner for equihash96.5 November 13, 2017, 11:22:39 AM
Optiminer 2.0 is great, but unstable af.
I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
How match ksols does this rig?I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
November 13, 2017, 10:49:39 AM
Optiminer 2.0 is great, but unstable af.
I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
How match ksols does this rig?I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
November 13, 2017, 10:24:05 AM
Optiminer 2.0 is great, but unstable af.
I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
How match ksols does this rig? I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
November 13, 2017, 08:24:52 AM
Optiminer 2.0 is great, but unstable af.
I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
I'm running 6x1060 6GB rig powered by EthOS v1.2.5 (Linux ###### 4.8.17-ethos49 #6 SMP Tue Aug 29 23:24:18 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux), Nvidia driver version: 384.47
Optiminer 2.0 runs with no errors, the performance is really impressive (equihash96_5), BUT... it works only half an hour max and then HDD led glows red (not blinking), nothing happens, system hanged and unresponsive. So I hit reset, os and the miner loads up... 10-20 minutes and it hangs again... NO ERRORS, NO NOTHING.. hashrate just drops to zero and then hang occurs. Perhaps my Core2Quad Q9450 cpu is too weak for this miner idk, if so, tell me is there a way to exclude cpu from mining process? Oh and could you please explain --pci-modes there are four, right? which one is best for pcie2.0 system? Thanks in advance.
November 13, 2017, 05:08:58 AM
I just tried the miner at work and I get the following error on Ubuntu16:
[GPU0] Device info: {"id": "0/0" "name": "GeForce GT 730" "platform": "Nvidia" "driver": "387.12"}
ptxas fatal : SM version specified by .target is higher than default SM version assumed
Any ideas? I cannot test on my GTX1070 as I am on Windows on all my rigs
[GPU0] Device info: {"id": "0/0" "name": "GeForce GT 730" "platform": "Nvidia" "driver": "387.12"}
ptxas fatal : SM version specified by .target is higher than default SM version assumed
Any ideas? I cannot test on my GTX1070 as I am on Windows on all my rigs
November 13, 2017, 01:42:28 AM
I'm not sure who/why deleted my previous post...
Good job Optiminer! This was long overdue
Good job Optiminer! This was long overdue
Jump to: