Topic: Optiminer/Zero v1.2.0 (AMD+NVIDIA GPU) Linux+Windows (Read 13247 times)

hi i am facing this problem at simpleos/linux
my gpu's are Gtx 1060 6 Gb.

Hello!
My miner reboots every 3-5 minutes. How to fix it?
6x1070, Win-7, RAM 8Gb

this coin could definitely need help from Gtx 1060 6gb cards. since there are a ton of them. i am also waiting for the optiminer for 1060s so that ill mine them. ethereum difficulty is really dead serious.

Please could you release the 6GB version me and 5 other of my friends would love to mine it and we all have 1060 6gbs. it would be awesome!

info?
which cards are you using? the start file included is already good for work you just need to change your user and password of nova and its ready!

Hello all,
I change BAT file with my infos but it did not work. Could someone share a BAT file as an example?
Thanks a lot.

I have nvidia 1070 8gb called device d0 and amd 580 calles device 0 too... How i can make them work separately?

someone is mining with gtx 1060 6gb??  because i cant see them working

Use 1060 GTX 6 gb, too many times get autoreboot miner, because get this message :

[error] Found solution index out of range: 3476816541
[warning] [GPU 0] Share submission failed: job not found

 

hashrate of 1080ti?

I tested version 1.1 on my R9 Nano 4GB (Win 7) with Adrenaline drivers and it does not work. No errors are reported, the command line simply goes to 'pause'. Are 15.12 drivers an absolute requirement?

And I wonder, would there be any additional performance increase from Vega Frontier Edition's 16GB RAM compared to Vega 64's 8GB? Maybe it would make sense to add support for it...

no one can post a work miner for 1060 6gb?
i have 1060 3gb cards but i think its impossible to mine?

I cant use my gtx 970 4Gb cards with the 4GB version

Hello Optiminer,

Version for 6GB cards would be really nice, i would really appreciated it.

Yes, sir! That would be wonderful!
I have 1060 6gb and looking forward to start mining zero on windows.

Does any one know what is the 1080ti OCed performance?

To overcome the issue mentioned in my previous post, I ran each platform (AMD & NVIDIA) on a different optiminer instance running concurrently, using the -c switch.

So regarding the Nvidia platform: I tried to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.

On the same rig, I have two AMD RX cards which as explained above, I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos/linux?

I 've used help and I could see that the platform is different, but this still doesn't answer my question how to properly use the -d parameter to select one or a few of the gpus.
For example, how to select only gpu 0 on platform 0 AND gpu 0 on platform 1?

optiminer --list-devices
check platform (-c) 0 or 1

you could have use help