Topic: Optiminer/Zero v1.2.0 (AMD+NVIDIA GPU) Linux+Windows - page 3. (Read 13248 times)

what do you mean its not true and closed to a miner ?
:joe
command
goto :joe is like one of the oldest commands and it is true 

It's not true!
Anyway I have found a script which doesn't allow to be closed to a miner =)

ah okay !

well its not wrong i just meant the loop command not the whole thing i just needed device 1 2 3 on platform 0 to work so that worked for me.

thats wrong optiminer -s zero.suprnova.cc:6568 -u (user.wn) (-p wp )-m 8080 (--device 1 -d 2 -d 3 -c 0)

optiminer -s %POOL% -u %USER% -p %PASSWORD% -d 1 -i 1

SET POOL=zero.suprnova.cc:6568
SET USER=user.wn
SET PASSWORD=wp

If you only want to take the first graphic card then  -d 0   or  -d 1 -d 2 etc
If you want to take all you leave the entry free

(for help  only this entry in start.bat    
optiminer --help)

or run benchmark

regards

this makes it loops around if closes by itself.

Rig=4 1070 1 1080.

 also my assumption is the processor utilization,
 But this comes from the interplay (Low CPU - Strong GPU - not optimal programming Mining software.) I had previously 6 x GPU Gtx 1060 with EWBF Miner with 8 GB Ram no problem, now it is 2 GTX 1080 TI with 16 GB Ram and it Runs only under Linux properly

Ha Ha yeah, well, i guess its Nvidia then, i'm aware it takes up much more CPU power for instance. My guess is that the windows geforce drivers aren't playing nice with the internal bus NB/SB. Maybe motherboard BIOS? I don't have an Nvidia rig to test it out though, but I would recommend a "newer" paging Hard drive that was designed after a time workstations only had 4gb of ram.

maybe playing with the sector size could be better for stability and/or even performance in the form of consistency, but again in the wild world of pagefile, everything depends.
*EDIT* tested different cluster sizes, got strange results, but I only have a 512 physical to play with (probably pushing it) and don't feel like formatting my 4kb main drive.

You agree 100%, but under windows 10 Prof. 64 had the increase of the virtual memory no effect,
Also retrofit the physical memory
Or moving the pagefile.sys to an empty HDD was useless
Only the change to Linux brought success.

Shit WINDUMB :-)



regards,
lokko

Good to know, I'm on Radeon/Windows and she's pretty stable, only if i start messing with settings opening and closing the miner multiple times do i get a hangup. Pagefile is important though, as is RAM to a lesser extent. Usually you want to keep pagefile to 1.5 times your RAM at most, and people may have presets limiting the amount of HD space it will use which will crash the miner on startup if you don't have enough allocated. the 1.5 number is just rule of thumb, you can go way beyond that but it comes at a cost of stability, and either way the more pagefile you use say ~32gb, the more you bottleneck your data speeds when doing anything else should you also use it for browsing/entertainment. also having a lot of pagefile will reduce it's lifespan by a bit. all in all having too little = bad. having more than enough = it just works normally.

This is why I recommend having a separate drive handle the pagefile only if you can help it, but ultimately not necessary and in a healthy rig with a healthy amount of ram and a modern HDD, you shouldn't notice a difference. you could always do the USB file transfer test too and see how much it slows down when the miner is running.

and also, don't use an SSD for pagefile, maybe for video games and normal computer stuff it's okay but when you're taxing it with ~30gb and it will not last very long. On the other hand I know Linux handles swapfile much more nicely, but i still wouldn't use that amount on an SSD.

Hello friends, there is only one possible way, under Windows is the Zero Miner not really suitable, I have many days to healthy to solve the problem,

A) Ubuntu Linux 16.04
B) Nvidia driver
C) no more problems

On Windows, it seems to be a driver problem because the virtual memory is practically useless.


best regards

The miner sometimes stops work and is just closed
Can work week, and day can
There is any decision that miner was restarted ?
P.S Rig = 6x480 8 Gb

I think you can have it run on one instance, with the flags  -i 1 -i 1 -d 0 -d 1.

as for virtual memory, you may want to set it a bit higher, at 20gb just to give it breathing room, see if it helps.

same problem here with 2x1080ti.
Use 2 miner instances, one per card.
Still high cpu usage ~60%, but has been stable for 3 days.
win7, 8gb ram, 22gb page file, amd fx 4300 cpu.

Not sure what you have tried... my Zcash miner does not work for NVIDIA cards.

Simple: Because it is the only GPU miner available for ZERO. See first page for a link to more info about this interesting coin

EWBF has a miner for Zero parameters? that would be news to me.
I think you may be confused with Zcash since Opti does have a miner out for that too.

Im really interested in what Vega can do. since it will have 16gb of HBM2, and double speed half-precision floating point operations bringing it to ~25Tflops, I always wondered if mining takes advantage of single or half pass... maybe something special can be drawn up? I would say it's a game changer, but at an MSRP of like 1000 USD and very limited supply many likely going into pre-built systems, there just won't be enough to go around.

this is true, but when shopping around for cards, nothing brings bang for buck like Radeon. Nvidia got better on ETH and it's king of certain algos and definitely best w/h in a lot of cases but they're usually much more expensive, even from a manufacturer refurb, they're still in very high demand too but, obtainable. I guess it's what sort of mining you plan on hedging.

In any case, I have my 390s mining at ~70W 11.1mhs with spikes to the more normal 130W range, one of them doesn't seem to dance much, staying a little higher but it is driving my screen i'm sure if i OCed them a bit and spent a day installing the perfect drivers I could hit +13mh/s each but at the cost of like 140w for 3mh/s. no bad shares either. Even the 390s are going extinct in the wild since they're the next best thing to a 470 at what was usually even under 200$US for a used one.

my 480/580s are nice and cool even with ref coolers in summer heat all under 70c with under 50% fans. going to be treating them with the best paste and pads anyway, without going liquid metal.
I am noticing my GPU1 in afterburner is showing 16% usage and 100% FSB the others read 100% usage and ~40% FSB, it's also the video-out gpu on this rig.

All measurements taken on Gpu-Z/Afterburner, kill-a-watt on its way. so 70W = about ~110W with pcie draw from my understanding. CPU is under 20% (spikes to 28) with some casual browsing, I can even play a couple of games to pass the time with minimal frame penalty so long as i disable that GPU.

well maybe on purpose as they push CUDA, but ppl say there is solution something about GPU waiting on CPU, but I am not a coder so can`t help, not sure there is common fix but more a hard way to find it and make opencl work on NV with no CPU usage

PPS: or time to get used to cuda as AMD HW is out of stock soon we gona have a LOT more on NV hardware + NB mining cards hitting mining space! fu to AMD domination