Pangolin Whatsminer M10 - 33TH at 2145W - page 5.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: sarcheer on March 19, 2019, 11:30:42 AM

Edit: After giving it about 4 hours now, I just plugged it back in and everything is working... Very suspicious and will be sitting within view of this guy for the rest of the day with my fire extinguisher close by. Will still go through the support process with Pango to see what they have to say about what may have happened.

Hopefully it was just a small solder whisker or metal chip that shorted & blew. After Pango replies I would want to power down and open the PSU to look for the arc marks left. Most likely would be by the power cord inlet.

sarcheer

copper member

Activity: 330

Merit: 103

I am in Fairfax County, VA. I sent a message to the pango official group telegram as well as Yang JYan.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: sarcheer on March 19, 2019, 11:30:42 AM

I have created a support ticket and will update going forward with how Pango resolves this issue.

From what I recall, the pop originated from the PSU and was loud enough to make me jump back. The PDU's are still being used right now without issue.

Edit: After giving it about 4 hours now, I just plugged it back in and everything is working... Very suspicious and will be sitting within view of this guy for the rest of the day with my fire extinguisher close by. Will still go through the support process with Pango to see what they have to say about what may have happened.

are you usa based?

I am in Howell NJ

I ordered these parts as a just in case.

https://pangolinminer.com/product/power-supply-unit-for-m10d1/ I have 1

https://pangolinminer.com/product/miner-control-board-m10-m10s-d1/ I have 1

https://pangolinminer.com/product/miner-fan-set-m10/ I have this which is 1 pair of fans

they should send you a psu fast try asking on telegram all the links above have a telegram link.

sarcheer

copper member

Activity: 330

Merit: 103

Quote from: Steamtyme on March 19, 2019, 10:09:18 AM

Sorry to hear that. Hopefully they can move as quickly to help you as they did with Phil's issue, I'm guessing you've created a support ticket with them. Might take a late night on your part to catch them during business hours. Do you have any oter gear around to check the PDU's and see if they are ok? Just curious was the "pop" any of the breakers going again?

I have created a support ticket and will update going forward with how Pango resolves this issue.

From what I recall, the pop originated from the PSU and was loud enough to make me jump back. The PDU's are still being used right now without issue.

Edit: After giving it about 4 hours now, I just plugged it back in and everything is working... Very suspicious and will be sitting within view of this guy for the rest of the day with my fire extinguisher close by. Will still go through the support process with Pango to see what they have to say about what may have happened.

Steamtyme

legendary

Activity: 1568

Merit: 2037

Quote from: NotFuzzyWarm on March 19, 2019, 09:33:15 AM

Anyone else not getting emails from Pango about their orders and seeing that their the order status is not being updated?

Same as you, everything else is normal. It all shipped and arrived on the dates expected based on my order date. What I have been getting is a text from DHL that I have an order incoming, the day it ships, and one to pay tax before clearing customs. I would have assumed most of this was automated and should be pretty easy. They did however respond to an email about the M20.

Quote from: sarcheer on March 19, 2019, 09:37:48 AM

I've had a 0% failure rate over the years, so I guess this is probability biting me in the ass. Will update with next steps.

Sorry to hear that. Hopefully they can move as quickly to help you as they did with Phil's issue, I'm guessing you've created a support ticket with them. Might take a late night on your part to catch them during business hours. Do you have any oter gear around to check the PDU's and see if they are ok? Just curious was the "pop" any of the breakers going again?

HagssFIN

legendary

Activity: 2506

Merit: 1714

Electrical engineer. Mining since 2014.

Sorry to hear that, that sucks :/
Loud pop --> maybe a capacitor failure?

sarcheer

copper member

Activity: 330

Merit: 103

So bad news, after I set up my M10 and let it run for 45 minutes last night I came back in this morning and the breaker on its PDU was tripped. I swapped it to a different PDU and upon plugging it in, there was a very loud pop with sparks and a small amount of smoke coming out of the front of the PSU.

I've had a 0% failure rate over the years, so I guess this is probability biting me in the ass. Will update with next steps.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

As expected my 5th M10-31 arrived on Monday and as was the case with my previous one, zero notifications from either Pangolin or DHL regarding the order status and shipping information. Checking my Pangolin account both the previous order and this one are still tagged as 'Processing' even though I have received them.

Anyone else not getting emails from Pango about their orders and seeing that their the order status is not being updated?

Artemis3

legendary

Activity: 2030

Merit: 1573

CLEAN non GPL infringing code made in Rust lang

Quote from: philipma1957 on March 17, 2019, 07:52:14 AM

They did offer both for the youtube videos. I can pay for the two. And since we will be needing at least 20 units I don't mind doing a teardown.

Ask them about them about the M20S now that we know about it via whatsminer.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: Artemis3 on March 17, 2019, 06:07:01 AM

If you have to choose, i would go for the 48t. Having both would be interesting. Do you plan to disassemble and take pictures of everything, even the insides or the PSU, controller etc? Those are the most valuable reviews in my opinion, and of course the usual noise and power consumption tests

They did offer both for the youtube videos. I can pay for the two. And since we will be needing at least 20 units I don't mind doing a teardown.

Artemis3

legendary

Activity: 2030

Merit: 1573

CLEAN non GPL infringing code made in Rust lang

Quote from: philipma1957 on March 15, 2019, 08:13:30 AM

I contacted Pangolin and I may be able to get a demo for a you tube video.

Aprilish has been mentioned.

So based on the m10 it was available 30 days after Hagss did the nice write up and I did the youtube video.

So may15? just guessing.

I may get both models for the videos.

less hashpower more efficient
https://pangolinminer.com/product/whatsminer-m20-with-psu-48t/

more hashpower less efficient
https://pangolinminer.com/product/whatsminer-m20-with-psu-engineering-unit-58th-s-shipout-before-may-15/

Their support on telegram is very good.

If you have to choose, i would go for the 48t. Having both would be interesting. Do you plan to disassemble and take pictures of everything, even the insides or the PSU, controller etc? Those are the most valuable reviews in my opinion, and of course the usual noise and power consumption tests

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: sarcheer on March 15, 2019, 08:17:13 AM

Pretty cool they’re only moving up to 12nm. Now I just kinda wish i’d held off on my order!

well maybe not. if usa based these will be taxed at 27.6%

sarcheer

copper member

Activity: 330

Merit: 103

Pretty cool they’re only moving up to 12nm. Now I just kinda wish i’d held off on my order!

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

I contacted Pangolin and I may be able to get a demo for a you tube video.

Aprilish has been mentioned.

So based on the m10 it was available 30 days after Hagss did the nice write up and I did the youtube video.

So may15? just guessing.

I may get both models for the videos.

less hashpower more efficient
https://pangolinminer.com/product/whatsminer-m20-with-psu-48t/

more hashpower less efficient
https://pangolinminer.com/product/whatsminer-m20-with-psu-engineering-unit-58th-s-shipout-before-may-15/

Their support on telegram is very good.

Yrth

member

Activity: 123

Merit: 21

Quote from: HagssFIN on March 15, 2019, 01:21:35 AM

Cool, so the M20 is now finally unveiled in the public

I have been in talks with Pangolin and I might be able to have a demo and write a review for the M20.

I look forward to seeing that.

At that price I am a buyer if they check out and the release date isn't too far out.

HagssFIN

legendary

Activity: 2506

Merit: 1714

Electrical engineer. Mining since 2014.

Cool, so the M20 is now finally unveiled in the public

I have been in talks with Pangolin and I might be able to have a demo and write a review for the M20.

Yrth

member

Activity: 123

Merit: 21

Well, they just listed the M20 48 TH/s at 2300w

price is only 1450.

Pretty impressive if they can deliver. Too bad it's pre-order with no release date listed.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: DJsC on March 14, 2019, 02:43:51 PM

Anyone know how to set fan speed manually? Mine keeps cycling between 5,800 and 7,500 RPM within a minute or so and the change in frequency is driving me a little crazy. I'd like to set it to, say, a constant 6,800 or something less variable.

thanks

go to telegram and try to contact yang jyan he is support from pangolin he helped me troubleshoot my bad 1 wire to 3 slot bridge.

he gave me multiple files to download

Quote from: minefarmbuy on March 14, 2019, 01:17:43 PM

Out of stock now. Hope everyone who wanted last batch ordered.

yeah m10 is out of stock

https://pangolinminer.com/product/whatsminer-m10-instock-31t/

all of bitmain is out of stock.

well s11 t15 s15

I think only the crazy expensive innosilicon t3 is available.

I wonder if the s17 will drop and pangolin / whatsminer will drop the m17 or m20 or m whatever.

very early April.

DJsC

newbie

Activity: 16

Merit: 8

Anyone know how to set fan speed manually? Mine keeps cycling between 5,800 and 7,500 RPM within a minute or so and the change in frequency is driving me a little crazy. I'd like to set it to, say, a constant 6,800 or something less variable.

thanks

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Out of stock now. Hope everyone who wanted last batch ordered.

Topic: Pangolin Whatsminer M10 - 33TH at 2145W - page 5. (Read 22082 times)