Pangolin Whatsminer M10 - 33TH at 2145W - page 8.

SDRebel

hero member

Activity: 571

Merit: 507

Quote from: HagssFIN on September 20, 2018, 04:40:22 PM

Hi guys, my review is now online

https://bitcointalksearch.org/topic/reviewguide-whatsminer-m10-330-ths-2145w-bitcoin-sha-256-asic-miner-5033998

"This miner won't work in a 110-120 VAC mains voltage system."
Damn, us mortals in the west only have access to 120, unless you are my dryer or any other appliance, those get whatever they want
I'm looking for a decent miner to give me heat during the winter, but where i only have 120 outlets

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Hi guys, my review is now online

https://bitcointalksearch.org/topic/reviewguide-whatsminer-m10-330-ths-2145w-bitcoin-sha-256-asic-miner-5033998

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: HagssFIN on September 17, 2018, 10:20:40 AM

Status update:
My M10 unit just arrived. I will start making the review and post it in the hardware subforum as soon as possible.

http://i68.tinypic.com/2j0xuko.jpg

I hope they give us a lower power firmware

Just a bit so gear runs a little cooler and quieter

mgoz

full member

Activity: 265

Merit: 232

Looks like specs are similar to the T2Turbo+32T.

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Awe, snappity, snap!

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Status update:
My M10 unit just arrived. I will start making the review and post it in the hardware subforum as soon as possible.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: judypug1956 on September 15, 2018, 04:56:30 PM

I guess this is your new video?

https://youtu.be/KsdRuglODsk

It is not that it is this one

https://youtu.be/RuPXBR4Zi_U

So I got gear to be pretty quiet 45db to 48db while I sit in the basement den.

Later in the week I will fire up the T2turbo.

I should get 19.5 + 34.5 = 54th for 2 units using only 4100 watts

you would need 4 s-9's using 5600 watts.

but 3500 vs 2000 for the gear.

If I had 4 of these at the solar array I would do 136th at 9400 watts that is around 69 watts a th

It may do 138 th at 9400 or 68 watts a th

judypug1956

sr. member

Activity: 355

Merit: 276

I guess this is your new video?

https://youtu.be/KsdRuglODsk

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: vincl on September 15, 2018, 01:46:27 PM

https://www.youtube.com/watch?v=U7N4YphoaCI

sry for stalking you Cheesy

Its fine. I have to post a new video I managed to make sound okay with this material

https://www.homedepot.com/p/UltraTouch-48-in-x-6-ft-Radiant-Barrier-30000-11406/100656748

34th and not really too loud using it.

If they have a quiet firmware dropping to 30th and letting fans drop to 3000 vs 5000 it would be really good.

I will do a sound video showing the sound proofing.

vincl

member

Activity: 386

Merit: 18

https://www.youtube.com/watch?v=U7N4YphoaCI

sry for stalking you Cheesy

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

My Innosilicon T2Turbo was the best miner I ever owned.

But to run it at full speed using 2375 watts I would get 24th

This burns 2360 watts and I do 34.4 th

So it is basically 10 th for free.

No if I run the innosilicon at balanced I do 19.5th for 1750 watts

This is 15th more for 600 watts.

Really way better then the t2turbo

If you buy three s9js you do 43th for 4450 watts

So for 9.5 th you use 2100 watts.

Cost less say 1500 vs 1800 but 2100 extra watts will eat up that 300 in savings unless you have dirt cheap power.

And we are now in a new world under 70 watts a th.

With multiple companies looking to sell better gear like this I am excited for mining come 2019.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: philipma1957 on September 14, 2018, 01:55:04 PM

yeah it is very impressive right near the 68-70 watt a th mark.

I would love more info on website and to be able to back it off a bit

say 30th and 2000 watts

Yeah it would be cool if they could make a low-power firmware available, just like they did with the previous model M3X.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: HagssFIN on September 14, 2018, 01:48:13 PM

Cool vids Philip,
I can't wait to have a look at my unit in Monday.

yeah it is very impressive right near the 68-70 watt a th mark.

I would love more info on website and to be able to back it off a bit

say 30th and 2000 watts

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Cool vids Philip,
I can't wait to have a look at my unit in Monday.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: iluvbitcoins on September 14, 2018, 12:06:59 PM

Niiicee

Still a long ROI, but that ths/w means it's going to be profitable even if the price is under 4k$, should be able to run at least 2 years
Has to be able to break even by then o.o

So far I have yet to figure how to clock it.

As I always like to be able to slow gear down.

new video

Your video will be live at: https://youtu.be/U7N4YphoaCI

done raw no edits.

opinions so far
33 to 34 th at about 2350 watts = damn!

downside it is hotter then I care for:

the case is hot
the psu is hot

I have yet to figure out how to drop it to 30th and lower the watts

iluvbitcoins

legendary

Activity: 2198

Merit: 1150

Freedom&Honor

Niiicee

Still a long ROI, but that ths/w means it's going to be profitable even if the price is under 4k$, should be able to run at least 2 years
Has to be able to break even by then o.o

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: iluvbitcoins on September 14, 2018, 11:30:49 AM

Video video
We want a video

I have an unboxing video, but camera battery needs recharge for an ops video.

33293 gh and 2346 watts = 70.5 watts a gh

unboxing at https://youtu.be/1dY5-eLuQYA

scroll to bottom of this link to see the hash rate on ck's pool

http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

Code:

 {
   "workername": "16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.m10",
   "hashrate1m": "34.7T",
   "hashrate5m": "25.6T",
   "hashrate1hr": "4.27T",
   "hashrate1d": "192G",
   "hashrate7d": "27.5G",
   "lastshare": 1536943075,
   "shares": 3891140,
   "bestshare": 60894592.0,
   "lns": 3889963.735401265,
   "luck": 1.14,
   "herp": 4416496.939140817
  }

power is now at 2358 watts but hash is over 34th see below

so 2358/34350 = 68.6 watts a th

don't know how long it will work and it is loud but it is a motherfucking monster !

iluvbitcoins

legendary

Activity: 2198

Merit: 1150

Freedom&Honor

Quote from: philipma1957 on September 14, 2018, 11:28:22 AM

It is up and running!

my meter reads 2283 watts

it does flux up to 2346 watts

Video video
We want a video

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

It is up and running!

my meter reads 2283 watts

it does flux up to 2346 watts

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Quote from: sarcheer on September 14, 2018, 08:51:19 AM

The other problem are these tariffs. A 25% increase in price generally makes these unprofitable at pretty much any residential rate in the US, at least BTC return wise. Feeling very lucky to have found a T2T in my local market for $1300.

Tariffs have been hit or miss just like typical 3% ish prior. If you're ordering bulk expect to pay it. It you're a consumer not a business on a single unit you'll probably skate by. Still though you never know. I imagine we'll get a lot of quotes till this subsides to forgo our usual customs service at a 25% rate. Then it doesn't really matter with our model.

Is the live video of this still going? I at least saw the UI hashing at 34th/s 22 hours in, hopefully for HF and phil have something great to review.

Topic: Pangolin Whatsminer M10 - 33TH at 2145W - page 8. (Read 22070 times)