reserve me a gold one 
OK, reserved. 
Topic: [PAUSED] .10 btc 32-37gh 40-50 Wts Rockminer R-BOX. ASICMiner Gen 3 chip - page 5. (Read 17579 times)
June 10, 2014, 10:44:51 AM
June 10, 2014, 06:50:30 AM
reserve me a gold one
June 10, 2014, 02:10:29 AM
okay you got me sold on the breakout board + usb.
June 09, 2014, 11:57:57 PM
Nice!
I might havta jump on one of these deals yo!
I am working on mounts for the R-Boxes and should have those ready for testing and will offer up a couple for reviews.
Pick a color! I might havta jump on one of these deals yo!
I am working on mounts for the R-Boxes and should have those ready for testing and will offer up a couple for reviews.
June 09, 2014, 07:47:07 PM
Nice!
I might havta jump on one of these deals yo!
I am working on mounts for the R-Boxes and should have those ready for testing and will offer up a couple for reviews.
I might havta jump on one of these deals yo!
I am working on mounts for the R-Boxes and should have those ready for testing and will offer up a couple for reviews.
June 09, 2014, 07:23:13 PM
I have 3 extra BA break out boards. each order of 10 gets one, while they last. (on a good PSU, powering 10 r-boxes is safe with the BA board)
and...
remember these? :
I found a small stash here... you get one for free with each r-box. see OP
and...
remember these? :
I found a small stash here... you get one for free with each r-box. see OP
June 09, 2014, 06:59:17 PM
all orders shipped out.
June 09, 2014, 07:28:37 AM
I wonder if someone will make a direct pcie adapter like the gridseeds have.
A question to mstrongbow about the breakout board does it have an on /off switch?
To anyone thinking about buying these they are very quiet.
They run very stable at freq 270.
They are under 40 watts on a seasonic platinum psu.
They pulse their watt readings my 2 read 68 to 78 watts on my k-watt meter.
I will have a breakout board in house soon and 4 more of these.
I will setup the six on an antec 650 watt plat psu and give a very good set of photos and power readings on the six.
My hope for these is 6 = 192gh and 220watts with the plat psu
My big hope is someone figures out a undervolt underclock pencil method. like the s-1 thread on this subject.
I run 3 s-1's at 420gh and 563 watts.
If I could get 6 of these to do 162 gh and 150 watts It makes them worth more in the future.
At the current price of 650 usd a btc and 15 cents a kwatt these still pay for power up to Dec.
If under volting helps a lot they could pay for power until Jan /Feb
you would do the mod around thanksgiving
A question to mstrongbow about the breakout board does it have an on /off switch?
To anyone thinking about buying these they are very quiet.
They run very stable at freq 270.
They are under 40 watts on a seasonic platinum psu.
They pulse their watt readings my 2 read 68 to 78 watts on my k-watt meter.
I will have a breakout board in house soon and 4 more of these.
I will setup the six on an antec 650 watt plat psu and give a very good set of photos and power readings on the six.
My hope for these is 6 = 192gh and 220watts with the plat psu
My big hope is someone figures out a undervolt underclock pencil method. like the s-1 thread on this subject.
I run 3 s-1's at 420gh and 563 watts.
If I could get 6 of these to do 162 gh and 150 watts It makes them worth more in the future.
At the current price of 650 usd a btc and 15 cents a kwatt these still pay for power up to Dec.
If under volting helps a lot they could pay for power until Jan /Feb
you would do the mod around thanksgiving
June 09, 2014, 12:23:54 AM
and your just running the barrle plug cable connected to two of the plugs on the BB?
how many can each BB support/>
No more than 10 on a high quality PSU.how many can each BB support/>
Otherwise the board will run hot.
June 09, 2014, 12:19:59 AM
and your just running the barrle plug cable connected to two of the plugs on the BB?
how many can each BB support/>
how many can each BB support/>
Yep, just wired the barrel adapters right onto the bb...
pics at the link below
https://bitcointalk.org/index.php?topic=612390.new;topicseen#new
Another forum member claims they will support 12 Fury boards but I counted 20-12v ports (if I remember correctly)
DO NOT PLUG MORE THAN ONE (1) PSU INTO THESE BREAKOUT BOARDS.
^bad things happen! (to the secondary psu)
June 09, 2014, 12:14:35 AM
and your just running the barrle plug cable connected to two of the plugs on the BB?
how many can each BB support/>
how many can each BB support/>
June 08, 2014, 07:03:18 PM
These power boards from BA work good with these?
I have 3 R-Box units on my BA bb
June 08, 2014, 07:00:00 PM
These power boards from BA work good with these?
June 08, 2014, 04:09:34 PM
Almost finished!...
June 08, 2014, 10:37:09 AM
Anyone have the 49 port hubs available?
http://www.eyeboot.com/49-port-usb-hubhttp://minersource.net/products/49-port-powered-usb-hub
and others (google around - just check reputation on these forums, just in case)
June 08, 2014, 10:07:31 AM
Anyone have the 49 port hubs available?
June 07, 2014, 09:26:10 PM
Dilema..... order more of these, or wait for the x-box.... ?
order more ofcourse! you are probably right.... now i can put all those anker hubs from the old usb sticks back to use....
I am getting very good power numbers using a platinum psu a sea sonic 1200 watt high end beast left over from gnu mining ltc.
about 64gh and 70 watts for 2 units. that is about 32gh and 35 watts for one unit and they are really quiet.
My only complaint is the dc cords for grid seeds are too tight for this.
canary are you supplying bricks vs dc power cord do it yourself?
June 07, 2014, 05:35:33 PM
Dilema..... order more of these, or wait for the x-box.... ?
order more ofcourse! you are probably right.... now i can put all those anker hubs from the old usb sticks back to use....
I am getting very good power numbers using a platinum psu a sea sonic 1200 watt high end beast left over from gnu mining ltc.
about 64gh and 70 watts for 2 units. that is about 32gh and 35 watts for one unit and they are really quiet.
My only complaint is the dc cords for grid seeds are too tight for this.
canary are you supplying bricks vs dc power cord do it yourself?
This weekend's promo (6/7-8/2014): buy 5 miners (single order or multiples of 5 at once) and get 5 brick power supplies included for free (while supplies last) (<-- requires a large priority box)
the power bricks work great... and he also includes the proper size barrel plug if you wanted to connect to your own psu...
June 07, 2014, 03:47:50 PM
Dilema..... order more of these, or wait for the x-box.... ?
order more ofcourse! you are probably right.... now i can put all those anker hubs from the old usb sticks back to use....
I am getting very good power numbers using a platinum psu a sea sonic 1200 watt high end beast left over from gnu mining ltc.
about 64gh and 70 watts for 2 units. that is about 32gh and 35 watts for one unit and they are really quiet.
My only complaint is the dc cords for grid seeds are too tight for this.
canary are you supplying bricks vs dc power cord do it yourself?
June 07, 2014, 01:53:02 PM
Dilema..... order more of these, or wait for the x-box.... ?
order more ofcourse! you are probably right.... now i can put all those anker hubs from the old usb sticks back to use....
Jump to: