i will start selling after price touch ~20k sath
diff will go double within two days.
xpb makes pools frustrated. (too much cpu load)
Better we mine solo. good luck!
Topic: Pebblecoin (XPB) - FIRST DPOS CRYPTONOTE COIN LIVE - Qt Wallet GUI - v0.4.4.1 - page 21. (Read 56036 times)
February 07, 2015, 01:24:15 PM
February 07, 2015, 01:01:56 PM
http://xpb.noteminer.com. is this pool working properly?
That pool is 38 blocks behind right now.
February 04, 2015, 08:59:19 PM
February 07, 2015, 12:59:18 PM
Pool hasn't sent a payout in 4 and a half hours, might want to look into it.
February 07, 2015, 08:55:34 AM
weird, doesn't connect to daemon, then it does...
[wallet XXX]: refresh
Starting refresh...
2015-Feb-07 08:35:34.097818 Detaching blockchain on height 26324
2015-Feb-07 08:35:34.098225 Detached blockchain on height 26324, transfers detached 0, blocks detached 1
2015-Feb-07 08:38:56.225844 ERROR ../../src/wallet/wallet2.cpp:239 !r. THROW EXCEPTION: error::no_connection_to_daemon
2015-Feb-07 08:38:56.226441 ../../src/wallet/wallet2.cpp:239:N5tools5error23no_connection_to_daemonE: no connection to daemon, request = getblocks.bin
Refresh done, blocks received: 308
balance: 0.00000000, unlocked balance: 0.00000000
[wallet XXX]: refresh
Starting refresh...
2015-Feb-07 08:35:34.097818 Detaching blockchain on height 26324
2015-Feb-07 08:35:34.098225 Detached blockchain on height 26324, transfers detached 0, blocks detached 1
2015-Feb-07 08:38:56.225844 ERROR ../../src/wallet/wallet2.cpp:239 !r. THROW EXCEPTION: error::no_connection_to_daemon
2015-Feb-07 08:38:56.226441 ../../src/wallet/wallet2.cpp:239:N5tools5error23no_connection_to_daemonE: no connection to daemon, request = getblocks.bin
Refresh done, blocks received: 308
balance: 0.00000000, unlocked balance: 0.00000000
February 04, 2015, 06:51:29 PM
where to get the miner under windows?
You can't read the post right above yours?
February 06, 2015, 07:04:12 PM
XPB, what're your thoughts on anti-pool? Like spreadcoin?
I think pools are helpful to encourage more people to mine. If pool operator starts to double-spend it will be found out and people will not use them to mine any more. Also as with bitcoin the community is sensitive to how much hashrate a pool has and will avoid putting too much in one pool.This is the fallacy of the actively aware community. If cryptocurrency is to become as ubiquitous as we hope, your average user isn't going to put that much time into the underpinnings of the technology. No one really looks into the security of the bank / credit card they use. No one knows how money currently moves around the banking system. They just sign up for whatever offers the best deal.
but I guess if I learned enough code, i could make the coin baby......
February 06, 2015, 06:40:48 PM
Also on the main pool, I'm getting:
[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
There were some overload issues with the pool and it hasn't been as efficient as it could be. I tweaked the settings and it should be better now. Let me know in about a day if the stats still don't line up.[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
Thanks, hash rate on the pool is better now, jumps around more than the local miners, but that's probably normal.
Pending balance and payments seem to be staying the same now however.
Is there a way to setup a simple private pool using just the daemon for example? Then have miners point to the daemon to mine?
I tried using my normal method, but seems the pebblecoin.conf values are much different.
I am not sure. I haven't looked into this. If it worked with other cryptonote coins it should work with pebblecoin too.I tried using my normal method, but seems the pebblecoin.conf values are much different.
Thanks for the reply.
Pebblecoin.conf doesn't seem to accept the values needed to be used as a private pool that you can mine to.
For instance, I have the daemon and wallet running on one server without enough RAM, then have 2 computers with enough RAM mining to that wallet.
I'm unable to find any method for making this work. I must be missing something custom with pebblecoin and being able to set private miner/rpc settings.
February 06, 2015, 06:35:14 PM
Well, I made 0.025 off this coin.
I'm sticking around. I'll probably invest againonce if the price drops.
I'm sticking around. I'll probably invest again
February 06, 2015, 06:34:53 PM
XPB, what're your thoughts on anti-pool? Like spreadcoin?
I think pools are helpful to encourage more people to mine. If pool operator starts to double-spend it will be found out and people will not use them to mine any more. Also as with bitcoin the community is sensitive to how much hashrate a pool has and will avoid putting too much in one pool. February 06, 2015, 06:32:44 PM
Also on the main pool, I'm getting:
[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
There were some overload issues with the pool and it hasn't been as efficient as it could be. I tweaked the settings and it should be better now. Let me know in about a day if the stats still don't line up.[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
Thanks, hash rate on the pool is better now, jumps around more than the local miners, but that's probably normal.
Pending balance and payments seem to be staying the same now however.
Is there a way to setup a simple private pool using just the daemon for example? Then have miners point to the daemon to mine?
I tried using my normal method, but seems the pebblecoin.conf values are much different.
I am not sure. I haven't looked into this. If it worked with other cryptonote coins it should work with pebblecoin too.I tried using my normal method, but seems the pebblecoin.conf values are much different.
February 06, 2015, 05:56:59 PM
Also on the main pool, I'm getting:
[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
There were some overload issues with the pool and it hasn't been as efficient as it could be. I tweaked the settings and it should be better now. Let me know in about a day if the stats still don't line up.[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
Thanks, hash rate on the pool is better now, jumps around more than the local miners, but that's probably normal.
Pending balance and payments seem to be staying the same now however.
Is there a way to setup a simple private pool using just the daemon for example? Then have miners point to the daemon to mine?
I tried using my normal method, but seems the pebblecoin.conf values are much different.
February 06, 2015, 05:48:59 PM
XPB, what're your thoughts on anti-pool? Like spreadcoin?
If that was implemented, this coin would be great!I'm just curious, how did you find out about Spreadcoin?
every once in a while (whn my "show new replies to your post" turns up nothing), I click on "show unread posts since your last visit". Because the description of the coin (pool resistant whatever) is in the title of the thread, I was interested and clicked on it. I ultimately didn't put too much effort into the coin. Is it built on cryptonote too? Just saw that it uses tsivs ccminer, so I assume it is.
it'd be sweet if these two devs made a coin baby.
Holy Sh*t price is on 4849 sats!!!
February 06, 2015, 05:30:14 PM
XPB, what're your thoughts on anti-pool? Like spreadcoin?
If that was implemented, this coin would be great!I'm just curious, how did you find out about Spreadcoin?
every once in a while (whn my "show new replies to your post" turns up nothing), I click on "show unread posts since your last visit". Because the description of the coin (pool resistant whatever) is in the title of the thread, I was interested and clicked on it. I ultimately didn't put too much effort into the coin. Is it built on cryptonote too? Just saw that it uses tsivs ccminer, so I assume it is.
it'd be sweet if these two devs made a coin baby.
February 03, 2015, 03:12:22 PM
Has anybody actually succeeded in using Poloniex to buy/sell XPBs? A lot of people have issues. I will take the link off of the first post until people confirm that it works. If it works for some and not others, then why?
I have - simpleminer must be used to xfer coins.
As-is - you can't specify the ID in that GUI.
February 06, 2015, 05:07:55 PM
XPB, what're your thoughts on anti-pool? Like spreadcoin?
If that was implemented, this coin would be great!I'm just curious, how did you find out about Spreadcoin?
February 06, 2015, 05:01:17 PM
XPB, what're your thoughts on anti-pool? Like spreadcoin?
February 03, 2015, 03:02:52 PM
Hi,
anyone had success to transfer coins to poloniex?
I have tried from qt-wallet 20 hours ago (047a623f52a18987c8c0b95dfbed3524530fb4cf094e0090928235adc6c44fa7) and from simplewallet 2 hours ago (124ed0f957f6fb896e7efdc35b9fc92312cc0817a7a23983b6290e3c79456892) - but nothing is showing up at Poloniex...
best...
dhj.
Has anybody actually succeeded in using Poloniex to buy/sell XPBs? A lot of people have issues. I will take the link off of the first post until people confirm that it works. If it works for some and not others, then why?anyone had success to transfer coins to poloniex?
I have tried from qt-wallet 20 hours ago (047a623f52a18987c8c0b95dfbed3524530fb4cf094e0090928235adc6c44fa7) and from simplewallet 2 hours ago (124ed0f957f6fb896e7efdc35b9fc92312cc0817a7a23983b6290e3c79456892) - but nothing is showing up at Poloniex...
best...
dhj.
I have - simpleminer must be used to xfer coins.
February 06, 2015, 04:54:47 PM
Also on the main pool, I'm getting:
[2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
There were some overload issues with the pool and it hasn't been as efficient as it could be. I tweaked the settings and it should be better now. Let me know in about a day if the stats still don't line up. [2015-02-06 20:06:58] Stratum connection timed out
[2015-02-06 20:06:58] Stratum connection interrupted
[2015-02-06 20:06:58] Stratum detected new block
Over and over, though my stats seem to show up, they're much lower than the local miner shows.
Anything going on?
February 06, 2015, 04:52:54 PM
okay, so is the daemon miner as efficient as the standalone?
Yes, they use the same algorithm. Jump to: