PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 130.

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: colin_farrell001 on January 29, 2021, 01:49:00 AM

Hey guys. I have an extremely low hash rate performance on my 6xRadeon RX570 4Gb cards rig. Around 3-4 Mh/s per card during ETH mining on nanopool.org.

Installed recommended AMD 20.11.1 version of drivers. Compute mode is on. Core clock 1150, Memory clock 1850. Why it can be? Any suggestions?

change to linux, or OS like ethOS, hiveOS, .....

colin_farrell001

newbie

Activity: 2

Merit: 0

Hey guys. I have an extremely low hash rate performance on my 6xRadeon RX570 4Gb cards rig. Around 3-4 Mh/s per card during ETH mining on nanopool.org.

Installed recommended AMD 20.11.1 version of drivers. Compute mode is on. Core clock 1150, Memory clock 1850. Why it can be? Any suggestions?

naenaez

newbie

Activity: 1

Merit: 0

Now I'm using V.5.5c for windows and I have some problem with Effective speed is quite diff with AVG Eth speed, How to fix that ??

*** 1:04 *** 1/29 11:37 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:04
Eth: Accepted shares 149 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 19 (11.31%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 188.7 GH (!)
Eth: Average speed (5 min): 180.371 MH/s
Eth: Effective speed: 153.61 MH/s; at pool: 153.61 MH/s

Sledge0001

full member

Activity: 600

Merit: 152

After updating to the latest 5.5c I am now getting these errors:

2021.01.28:18:28:22.037: gps3 CUDA error in CudaProgram.cu:267 : unknown error (999)
2021.01.28:18:28:22.037: GPU3 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.01.28:18:28:22.037: GPU3 GPU3 search error: unknown error
2021.01.28:18:28:22.037: wdog Fatal error detected. Restarting.
2021.01.28:18:28:22.059: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.01.28:18:28:22.059: GPU1 GPU1 search error: unknown error
2021.01.28:18:28:22.075: GPU6 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.01.28:18:28:22.075: GPU6 GPU6 search error: unknown error
2021.01.28:18:28:22.091: GPU5 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.01.28:18:28:22.091: GPU5 GPU5 search error: unknown error
2021.01.28:18:28:22.121: GPU2 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.01.28:18:28:22.121: GPU2 GPU2 search error: unknown error
2021.01.28:18:28:22.137: GPU4 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.01.28:18:28:22.138: GPU4 GPU4 search error: unknown error

Seems like I am seeing Unable to get Temperature and Unable to get Fan Speed.

Happens on different cards....

Any ideas?

miner29

full member

Activity: 1275

Merit: 141

Quote from: shimmishim on January 28, 2021, 05:24:28 PM

Quote from: miner29 on January 28, 2021, 05:06:32 PM

Quote from: shimmishim on January 28, 2021, 05:03:00 PM

I'm having issues on my everyday computer. The phoenixminer runs fine for 25-65 minutes before the miner just pauses and says press any key to continue. I don't see an error message and I've checked the logs too. I've tried this with an AMD 480, Nvidia 1070, and now a 3090. No matter what I try, this happens to me. I've been monitoring temps and checking for errors with HwInfo and I see nothing. Thank you.

What is the sleep time on the computer? Screen saver? Sounds like something is occuring at a set interval that is causing he miner to stop.

No sleep timer. I've set everything to always on. No screen saver either. That's what I figured as well but can't seem to figure it out but would those things really cause the miner to pause? Also, when unpause the program just closes and I have to restart the miner.

Make sure you dont have any bios settings for idling the cpu or lowering usage....i always disable this but since it happens to all the different cards its most likey something at board level or OS level. Also disable any virtualization in the cpu as this can also cause issues.

Was gonna suggest watching temps but sounds like you have eliminated that as well i wouldnt expect all 3 cards to suffer from it.

shimmishim

newbie

Activity: 8

Merit: 0

Quote from: miner29 on January 28, 2021, 05:06:32 PM

Quote from: shimmishim on January 28, 2021, 05:03:00 PM

I'm having issues on my everyday computer. The phoenixminer runs fine for 25-65 minutes before the miner just pauses and says press any key to continue. I don't see an error message and I've checked the logs too. I've tried this with an AMD 480, Nvidia 1070, and now a 3090. No matter what I try, this happens to me. I've been monitoring temps and checking for errors with HwInfo and I see nothing. Thank you.

What is the sleep time on the computer? Screen saver? Sounds like something is occuring at a set interval that is causing he miner to stop.

No sleep timer. I've set everything to always on. No screen saver either. That's what I figured as well but can't seem to figure it out but would those things really cause the miner to pause? Also, when unpause the program just closes and I have to restart the miner.

miner29

full member

Activity: 1275

Merit: 141

Quote from: shimmishim on January 28, 2021, 05:03:00 PM

I'm having issues on my everyday computer. The phoenixminer runs fine for 25-65 minutes before the miner just pauses and says press any key to continue. I don't see an error message and I've checked the logs too. I've tried this with an AMD 480, Nvidia 1070, and now a 3090. No matter what I try, this happens to me. I've been monitoring temps and checking for errors with HwInfo and I see nothing. Thank you.

What is the sleep time on the computer? Screen saver? Sounds like something is occuring at a set interval that is causing he miner to stop.

shimmishim

newbie

Activity: 8

Merit: 0

I'm having issues on my everyday computer. The phoenixminer runs fine for 25-65 minutes before the miner just pauses and says press any key to continue. I don't see an error message and I've checked the logs too. I've tried this with an AMD 480, Nvidia 1070, and now a 3090. No matter what I try, this happens to me. I've been monitoring temps and checking for errors with HwInfo and I see nothing. Thank you.

jebidia

jr. member

Activity: 161

Merit: 1

Quote from: pr0ximus on January 28, 2021, 12:23:19 PM

Why is it that PM (even with the latest version which is 5.5c) is always around 10Mh/s slower (on a Zotac 1060 6GB 6+7 card rig) than T-Rex's both with the same OC setups and straps on. I had been using PM all along and realized only a month ago that after all, it is NOT the fastest miner as it claims to be. Not to be a critic but I'm very curious why such a big difference?

You need to do the math on shares per minute...The way I've tested is to put 1/2 the cards on one miner and 1/2 on another in the same rig...I've found them all to be very close on my 2080s, 1080 tis and 5700 XT cards...I do use TR on my VII though. I like the power and clock options in PM that aren't yet present in TR...Plus the fee is 1/2

pr0ximus

full member

Activity: 142

Merit: 100

Why is it that PM (even with the latest version which is 5.5c) is always around 10Mh/s slower (on a Zotac 1060 6GB 6+7 card rig) than T-Rex's both with the same OC setups and straps on. I had been using PM all along and realized only a month ago that after all, it is NOT the fastest miner as it claims to be. Not to be a critic but I'm very curious why such a big difference?

ruplikminer

jr. member

Activity: 504

Merit: 3

I used PhoenixMiner on all of my rigs under linux but I was struggling to keep them stable. Continuous hangs. To make them stable I had to lower the closk quite a lot. Moved to the latest team red miner and all the problems are gone finally. I can overclock more and I have ZERO crashes. I reboot myself one time every 5/7days just because.

DooGZ

newbie

Activity: 12

Merit: 0

anyone encountered GPU fault detected: 146? got this after upgrading to the latest version from latest ISO([email protected]) version.
rig is still mining, even with that error, using Phoenixminer 5.5c, tried a backup USB drive with latest hive ISO and the error was gone.

also tried downgrading Phoenixminer from 5.5c to 5.4c and the error was gone.

gpus: rx570 8gb

pic not mine
https://forum.hiveos.farm/uploads/default/original/2X/1/1c8f5c76cdbbfd8b06e346f3254b69f79968ea05.jpeg

jebidia

jr. member

Activity: 161

Merit: 1

Quote from: GodOfStars on January 28, 2021, 07:04:05 AM

Hi, the miner gives me the same problem for a couple of months now. Every several hours I have a bug that happens with many gigahashes to one of my cards and then the miner pauses. I have 7 Vega VII with 1550 clock and 1000MHz that was hashing very good for months at 850voltage. I am using the recommended good drivers 20.8.1 and the latest phoenix miner 5.5c. But my problem occurred past the update of 4.9c miner. Please help, thank you!

I use Phoenix for most of my miners but for my VII I use team red with core @ 1550 mem @ 1100 voltage @ 850 and get 84.7 on 145 watts with the card at between 60-65 degrees. Driver: 20.9.2 I reboot about once a week for good measure but it has never hung in the 6 months I've been running it.

GodOfStars

newbie

Activity: 49

Merit: 0

Hi, the miner gives me the same problem for a couple of months now. Every several hours I have a bug that happens with many gigahashes to one of my cards and then the miner pauses. I have 7 Vega VII with 1550 clock and 1000MHz that was hashing very good for months at 850voltage. I am using the recommended good drivers 20.8.1 and the latest phoenix miner 5.5c. But my problem occurred past the update of 4.9c miner. Please help, thank you!

BogdanCo

hero member

Activity: 729

Merit: 513

Quote from: UserName2020 on January 28, 2021, 02:41:21 AM

According to your post, your rig was up and running for about 2 to 3 seconds.

Take a snapshot after running your rig for 15 minutes.

Then, we will talk!

It was running for 3 minutes with 22% incorrect shares. Now this can be done with a command line, it looks like you have extra hash rate, but in reality it's not. 40Mhs/card with 22% incorrect shares are around 30-31 Mhs/card for an Rx 580.

UserName2020

newbie

Activity: 3

Merit: 0

henri2018

newbie

Activity: 46

Merit: 0

Wowww... That's pretty amazing. How could it be with RX580 8GB?

Quote from: Kiawpqe on January 27, 2021, 05:26:57 PM

rx 580 to 40Mh/s
x7=280Mh/s
625wats

Roll Eyes

Phoenix Miner 5.5c Windows/msvc - Release build
-----------------------------------------------

OpenCL driver version: 21.1.1
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie Cool

, OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 10), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie 15), OpenCL 2.0, 8 GB VRAM, 36 CUs

*** 0:03 *** 1/27 22:20 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:03
Eth: Accepted shares 14 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 4 (22.22%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 20.6 GH (!)
Eth: Average speed (5 min): 279.670 MH/s
Eth: Effective speed: 307.69 MH/s; at pool: 307.69 MH/s
Eth: Estimated income: 20.68 USD/day

Eth: New job #4a6bd6e9 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 279.704 MH/s, shares: 14/0/4, time: 0:03
GPUs: 1: 39.851 MH/s (3) 2: 39.920 MH/s (3) 3: 39.872 MH/s (1) 4: 39.992 MH/s (1/2) 5: 40.043 MH/s (2) 6: 39.991 MH/s (2/2) 7: 40.035 MH/s (2)
Eth: New job #cd4c8264 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 279.744 MH/s, shares: 14/0/4, time: 0:03
GPUs: 1: 39.877 MH/s (3) 2: 39.939 MH/s (3) 3: 39.903 MH/s (1) 4: 39.957 MH/s (1/2) 5: 40.064 MH/s (2) 6: 39.984 MH/s (2/2) 7: 40.021 MH/s (2)
Eth: New job #9d925a19 from ssl://eu1.ethermine.org:5555; diff: 4000MH

GodOfStars

newbie

Activity: 49

Merit: 0

Hi there, please someone to help me with this issue I have for a while on different AMD drivers and Phoenix miner versions. I have Radeon Vega VII and every several hours the miner gives me a lot of hashrates, like many gigahashes on one of the cards, not every single time is the same card, sometimes different. I have now the good drivers 20.8.1 and the latest phoenix miner. I never had this issue before it happened 1 month ago and it is not going away.

Johndrc

newbie

Activity: 4

Merit: 0

Miner always stop after 3 days, all my 4 rig rx580 windows 10 🤔🤔🤔

miner29

full member

Activity: 1275

Merit: 141

Quote from: Kiawpqe on January 27, 2021, 05:26:57 PM

rx 580 to 40Mh/s
x7=280Mh/s
625wats

Roll Eyes

Phoenix Miner 5.5c Windows/msvc - Release build
-----------------------------------------------

OpenCL driver version: 21.1.1
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie Cool

, OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 10), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie 15), OpenCL 2.0, 8 GB VRAM, 36 CUs

Eth: New job #4a6bd6e9 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 279.704 MH/s, shares: 14/0/4, time: 0:03
GPUs: 1: 39.851 MH/s (3) 2: 39.920 MH/s (3) 3: 39.872 MH/s (1) 4: 39.992 MH/s (1/2) 5: 40.043 MH/s (2) 6: 39.991 MH/s (2/2) 7: 40.035 MH/s (2)
Eth: New job #cd4c8264 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 279.744 MH/s, shares: 14/0/4, time: 0:03
GPUs: 1: 39.877 MH/s (3) 2: 39.939 MH/s (3) 3: 39.903 MH/s (1) 4: 39.957 MH/s (1/2) 5: 40.064 MH/s (2) 6: 39.984 MH/s (2/2) 7: 40.021 MH/s (2)
Eth: New job #9d925a19 from ssl://eu1.ethermine.org:5555; diff: 4000MH

See now that is SEXY

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 130. (Read 784857 times)