Hi Guys i am Happily using Phönix Miner.
I read a lot about the newest Amd Drivers are not recomendet so which Version is the best to Use?
I am using a Msi 5700 with Bios Mods ( 55-58mhs)and a Vega 64 (50MHS)
When i use high Clockrates on Memory (on the 5700) i get Driver Chrashes (driver resets)(1850-1900 Memory) and i am hoping to get it running a little more stable with other Adrenalin Version.
The Vega 64 is running on 1100 Hbm and some Amd Memory Tweaker settings and doing 50Mhs guess there is not much margin to improve there.
Tnx for your help appreciate it.
Regards Lexx
Btw Using Phönix 5.5c
adrinalin 20.11.2 right now
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 127. (Read 784857 times)
February 01, 2021, 11:39:47 AM
February 01, 2021, 10:52:23 AM
Hello,
here is a weird question, is it possible to set the GPU-s to farm on different pools/address-es in a SINGLE .bat file?
For example, mine 3 GPU-s on Address A and other 3 on Address B, but in a single .bat file. How would it look like if yes?
Because for weird reasons sometimes the second .bat file does not run on windows Start, so it's too much of a random chance, so i would like to have it in a single .bat if possible.
Greetings
no you cant, phoenix doesn have that option. you can copy whole folder then try here is a weird question, is it possible to set the GPU-s to farm on different pools/address-es in a SINGLE .bat file?
For example, mine 3 GPU-s on Address A and other 3 on Address B, but in a single .bat file. How would it look like if yes?
Because for weird reasons sometimes the second .bat file does not run on windows Start, so it's too much of a random chance, so i would like to have it in a single .bat if possible.
Greetings
February 01, 2021, 06:25:14 AM
I would like to know what is the best configuration for an AMD 5500XT, in term of Ubuntu version and driver.
I did try the last LTS and the last driver (amd-gpu-pro) but Phoenix is not detecting my card for an unknown reason (but it detect the version of OpenCL) also which openCL flag should we use ? Legacy or ROCm ?
I did try the last LTS and the last driver (amd-gpu-pro) but Phoenix is not detecting my card for an unknown reason (but it detect the version of OpenCL) also which openCL flag should we use ? Legacy or ROCm ?
February 01, 2021, 06:08:57 AM
Hello,
here is a weird question, is it possible to set the GPU-s to farm on different pools/address-es in a SINGLE .bat file?
For example, mine 3 GPU-s on Address A and other 3 on Address B, but in a single .bat file. How would it look like if yes?
Because for weird reasons sometimes the second .bat file does not run on windows Start, so it's too much of a random chance, so i would like to have it in a single .bat if possible.
Greetings
here is a weird question, is it possible to set the GPU-s to farm on different pools/address-es in a SINGLE .bat file?
For example, mine 3 GPU-s on Address A and other 3 on Address B, but in a single .bat file. How would it look like if yes?
Because for weird reasons sometimes the second .bat file does not run on windows Start, so it's too much of a random chance, so i would like to have it in a single .bat if possible.
Greetings
January 31, 2021, 09:37:29 PM
This is a really great miner, thank you!
It could be awesome if you could add the watt usage in the cmd, like this:
Please
It could be awesome if you could add the watt usage in the cmd, like this:
Please
It has that! It shows up every minute or so!
January 31, 2021, 09:14:28 PM
This is a really great miner, thank you!
It could be awesome if you could add the watt usage in the cmd, like this: https://i.imgur.com/dnQTTRX.png
Please
It could be awesome if you could add the watt usage in the cmd, like this: https://i.imgur.com/dnQTTRX.png
Please
January 31, 2021, 09:00:42 PM
This post contains the instructions on how to fix the latest 460.79 Nvidia Windows driver. The reason for the problem is that one of the DLLs (nvml.dll) that the driver installs is corrupted. Here is what you have to do in order to fix the problem:
Note that this .dll is the original .dll from Nvidia (it is still digitally signed by them). If you are really paranoid, you can download 460.79 drivers from Nvidia, then use 7zip to open the .exe and extract the dll (you will find it at 460.79-desktop-win10-64bit-international-dch-whql.exe\Display.Driver\nvml.dll), and then copy it to the C:\Windows\System32 folder.
- Download nvml_460.79_win10.zip from here: https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBw (MEGA)
If you want to check the integrity of the downloaded file, please use the following hashes:
Code:
File: nvml_460.79_win10.zip
---------------------------
SHA-1: 749ae64e4a5044994bec61d6d94459aa4c4cc719
SHA-256: 541ccdbd77c693d1de2919adab9eaa7e2b502c9ec2f722544002abbcf643539e
SHA-512: 80562b59e0a4f3c47557abc8742d9af6b119102f6fecfb3aa38112084ba0edd06451a631f633b667d57ec0417eb0db551d4cc5df90e0b835bce212b3ee6b75ce
- Extract the file nvml.dll from the .zip archive you have downloaded in the previous step, and then copy it to the folder C:\Windows\System32. There will be a file with the same name here, so you have to overwrite it (you will be prompted by Windows are you sure, blah, blah, blah)
Note that this .dll is the original .dll from Nvidia (it is still digitally signed by them). If you are really paranoid, you can download 460.79 drivers from Nvidia, then use 7zip to open the .exe and extract the dll (you will find it at 460.79-desktop-win10-64bit-international-dch-whql.exe\Display.Driver\nvml.dll), and then copy it to the C:\Windows\System32 folder.
Hello. I'm currently using Phoenix Miner 5.5c and getting this error message with my NVDIA GPUs. I have already copied the nvml.dll to c:\Windows\System32\ and still getting the same error. Any suggestions?
I'd go to the Nvidia website, grab the latest driver and do a clean install of the driver.
Here's the link:
https://www.nvidia.com/Download/index.aspx?lang=en-us
This didn't work
What card is it and did you install it with admin privileges?
January 31, 2021, 06:41:00 PM
I've got lower hashrate on ethermine with 5700xt and newest drivers. Normally i get 50mh/s reported and similar current/average speed on ethermine, but now its 45mh/s...
January 31, 2021, 06:08:26 PM
This post contains the instructions on how to fix the latest 460.79 Nvidia Windows driver. The reason for the problem is that one of the DLLs (nvml.dll) that the driver installs is corrupted. Here is what you have to do in order to fix the problem:
Note that this .dll is the original .dll from Nvidia (it is still digitally signed by them). If you are really paranoid, you can download 460.79 drivers from Nvidia, then use 7zip to open the .exe and extract the dll (you will find it at 460.79-desktop-win10-64bit-international-dch-whql.exe\Display.Driver\nvml.dll), and then copy it to the C:\Windows\System32 folder.
- Download nvml_460.79_win10.zip from here: https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBw (MEGA)
If you want to check the integrity of the downloaded file, please use the following hashes:
Code:
File: nvml_460.79_win10.zip
---------------------------
SHA-1: 749ae64e4a5044994bec61d6d94459aa4c4cc719
SHA-256: 541ccdbd77c693d1de2919adab9eaa7e2b502c9ec2f722544002abbcf643539e
SHA-512: 80562b59e0a4f3c47557abc8742d9af6b119102f6fecfb3aa38112084ba0edd06451a631f633b667d57ec0417eb0db551d4cc5df90e0b835bce212b3ee6b75ce
- Extract the file nvml.dll from the .zip archive you have downloaded in the previous step, and then copy it to the folder C:\Windows\System32. There will be a file with the same name here, so you have to overwrite it (you will be prompted by Windows are you sure, blah, blah, blah)
Note that this .dll is the original .dll from Nvidia (it is still digitally signed by them). If you are really paranoid, you can download 460.79 drivers from Nvidia, then use 7zip to open the .exe and extract the dll (you will find it at 460.79-desktop-win10-64bit-international-dch-whql.exe\Display.Driver\nvml.dll), and then copy it to the C:\Windows\System32 folder.
Hello. I'm currently using Phoenix Miner 5.5c and getting this error message with my NVDIA GPUs. I have already copied the nvml.dll to c:\Windows\System32\ and still getting the same error. Any suggestions?
I'd go to the Nvidia website, grab the latest driver and do a clean install of the driver.
Here's the link:
https://www.nvidia.com/Download/index.aspx?lang=en-us
January 31, 2021, 04:36:45 PM
Hi,
i have installed a new rig with configuration:
asus p5q-e
3 rx480 (1 rx 480 nitro, 2 rx 480 blower
Windows 10
4Go ram
Drivers amd radeon-software-adrenalin-2020-20.12.1-win10-64bit-dec8
PhoenixMiner PhoenixMiner_5.5c_Windows_AMD_NVIDIA
But my hasrate is very low 24.591~
https://i.goopics.net/800/RO7GY.png
https://i.goopics.net/800/vpxwo.png
PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal 0x7B7819gdfgdfgdfgdfg5Cf925Eb010F4E31dC4D02 -worker Phoenix -epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 55 -tt 79 -tstop 89 -tstart 79 -coin eth
I can't install the drivers Crimson ReLive Edition Beta for Blockchain because after reboot i have some artefact i can't see anything.
If you can help me ? Thank you
i have installed a new rig with configuration:
asus p5q-e
3 rx480 (1 rx 480 nitro, 2 rx 480 blower
Windows 10
4Go ram
Drivers amd radeon-software-adrenalin-2020-20.12.1-win10-64bit-dec8
PhoenixMiner PhoenixMiner_5.5c_Windows_AMD_NVIDIA
But my hasrate is very low 24.591~
https://i.goopics.net/800/RO7GY.png
https://i.goopics.net/800/vpxwo.png
PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal 0x7B7819gdfgdfgdfgdfg5Cf925Eb010F4E31dC4D02 -worker Phoenix -epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 55 -tt 79 -tstop 89 -tstart 79 -coin eth
I can't install the drivers Crimson ReLive Edition Beta for Blockchain because after reboot i have some artefact i can't see anything.
If you can help me ? Thank you
Go to amd panel and turn on compute mode.
January 31, 2021, 04:12:03 PM
Hello.
How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...
Second question:
How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?
So many people reporting this.How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...
Second question:
How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?
Whats your virtual memory? 16000-64.000
Driver version? 20.5.1 /20.4.2
Did windows updated recently? nope - is blocked from services.msc
You can creat 2 bat files add 1 bat file -gpus 1,2,3 second bat file -gpus 4,5,6 you may want add -cdm 0 because you will get warning about monitor port but it doesnt importand it is just warning that port will not be availabe for monitoring. - thanks dude
So people please look here and dont post that error again clsetkernelarg -48.
January 31, 2021, 03:44:29 PM
Hi,
i have installed a new rig with configuration:
asus p5q-e
3 rx480 (1 rx 480 nitro, 2 rx 480 blower
Windows 10
4Go ram
Drivers amd radeon-software-adrenalin-2020-20.12.1-win10-64bit-dec8
PhoenixMiner PhoenixMiner_5.5c_Windows_AMD_NVIDIA
But my hasrate is very low 24.591~
PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal 0x7B7819gdfgdfgdfgdfg5Cf925Eb010F4E31dC4D02 -worker Phoenix -epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 55 -tt 79 -tstop 89 -tstart 79 -coin eth
I can't install the drivers Crimson ReLive Edition Beta for Blockchain because after reboot i have some artefact i can't see anything.
If you can help me ? Thank you
i have installed a new rig with configuration:
asus p5q-e
3 rx480 (1 rx 480 nitro, 2 rx 480 blower
Windows 10
4Go ram
Drivers amd radeon-software-adrenalin-2020-20.12.1-win10-64bit-dec8
PhoenixMiner PhoenixMiner_5.5c_Windows_AMD_NVIDIA
But my hasrate is very low 24.591~
PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal 0x7B7819gdfgdfgdfgdfg5Cf925Eb010F4E31dC4D02 -worker Phoenix -epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 55 -tt 79 -tstop 89 -tstart 79 -coin eth
I can't install the drivers Crimson ReLive Edition Beta for Blockchain because after reboot i have some artefact i can't see anything.
If you can help me ? Thank you
Go to amd panel and turn on compute mode.
January 31, 2021, 03:09:19 PM
Hi,
i have installed a new rig with configuration:
asus p5q-e
3 rx480 (1 rx 480 nitro, 2 rx 480 blower
Windows 10
4Go ram
Drivers amd radeon-software-adrenalin-2020-20.12.1-win10-64bit-dec8
PhoenixMiner PhoenixMiner_5.5c_Windows_AMD_NVIDIA
But my hasrate is very low 24.591~
https://i.goopics.net/800/RO7GY.png
https://i.goopics.net/800/vpxwo.png
PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal 0x7B7819gdfgdfgdfgdfg5Cf925Eb010F4E31dC4D02 -worker Phoenix -epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 55 -tt 79 -tstop 89 -tstart 79 -coin eth
I can't install the drivers Crimson ReLive Edition Beta for Blockchain because after reboot i have some artefact i can't see anything.
If you can help me ? Thank you
i have installed a new rig with configuration:
asus p5q-e
3 rx480 (1 rx 480 nitro, 2 rx 480 blower
Windows 10
4Go ram
Drivers amd radeon-software-adrenalin-2020-20.12.1-win10-64bit-dec8
PhoenixMiner PhoenixMiner_5.5c_Windows_AMD_NVIDIA
But my hasrate is very low 24.591~
https://i.goopics.net/800/RO7GY.png
https://i.goopics.net/800/vpxwo.png
PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal 0x7B7819gdfgdfgdfgdfg5Cf925Eb010F4E31dC4D02 -worker Phoenix -epsw x -mode 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -ftime 55 -tt 79 -tstop 89 -tstart 79 -coin eth
I can't install the drivers Crimson ReLive Edition Beta for Blockchain because after reboot i have some artefact i can't see anything.
If you can help me ? Thank you
January 31, 2021, 03:08:20 PM
Hello.
How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...
Second question:
How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?
So many people reporting this.How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...
Second question:
How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?
Whats your virtual memory? 16000-64.000
Driver version? 20.5.1 /20.4.2
Did windows updated recently? nope - is blocked from services.msc
You can creat 2 bat files add 1 bat file -gpus 1,2,3 second bat file -gpus 4,5,6 you may want add -cdm 0 because you will get warning about monitor port but it doesnt importand it is just warning that port will not be availabe for monitoring. - thanks dude
January 31, 2021, 02:57:09 PM
Hi all.
Does anybody use -cdmrs option? It does not work for me
GTX 1070 * 6, Windows 10, driver version: 460.89, PM 5.5c.
Config file is the following:
Changes in mclock, cclock and powlim in config file do not detect, so they do not apply
Does anybody use -cdmrs option? It does not work for me
GTX 1070 * 6, Windows 10, driver version: 460.89, PM 5.5c.
Config file is the following:
Code:
#******************************#
# Mining options #
#******************************#
-nvidia
-nvf 2
-minRigSpeed 170
-rmode 2
-logsmaxsize 0
#******************************#
# Remote control options #
#******************************#
-cdm 2
-cdmport 3333
-cdmpass 334455
-cdmrs
#******************************#
# Hardware control options #
#******************************#
-hstats 2
-fanmin 30
-tstop 70
-tstart 40
-mcdag 1
-mclock +400,+440,+400,+440,+440,+400
-cclock 1-5:+102,6:+75
-powlim -15
Changes in mclock, cclock and powlim in config file do not detect, so they do not apply
January 31, 2021, 02:24:40 PM
the miner periodically crashes. I switched to the previous version so far - everything is stable
Been using it with 3090's, 2080TI's and 1060 6GB's without any issues.
Just curious if you are using AMD cards?
January 31, 2021, 02:04:33 PM
Hello.
How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...
Second question:
How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?
So many people reporting this.How about the error clsetkernelarg -48?
It happens only in my RX 580 Rig and im forced to use -clkernel 0 to use the miner, BUT im loosing 1mhs per GPU and im not stable (total hashrate running from 88 to 93).
And in final, im having a big difference from what i see on the miner and what pool is reporting, about steel shares.
The pool report much more steel shares that miner don't show.
Im using 5.5c version. The problem is born 2 days ago...
Second question:
How can i configure file batch of a 6 gpus rig for use GPU 1-2-3 to mine on wallet A and 4-5-6 to wallet B?
Whats your virtual memory?
Driver version?
Did windows updated recently?
You can creat 2 bat files add 1 bat file -gpus 1,2,3 second bat file -gpus 4,5,6 you may want add -cdm 0 because you will get warning about monitor port but it doesnt importand it is just warning that port will not be availabe for monitoring.
January 31, 2021, 01:47:59 PM
5.5c is the most recent version.
Always download the most recent version from page 1 of this thread.
If you do not you are most likely downloading and installing malware!
Always download the most recent version from page 1 of this thread.
If you do not you are most likely downloading and installing malware!
January 31, 2021, 11:17:13 AM
Hello everyone.
I was having an issue with 5.4c for windows where I got a clkernel error 48. I downloaded the new 5.5c and now I am only getting a third of my hashrate that I was getting with 5.4c before the kernel error. I have not changed anything that I had from before.
I have a rx580 8gb card.
Anyone have this issue or know a fix?
From 5.4c
No CUDA driver found
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs
Eth: the pool list contains 1 pool (1 from command-line)
Eth: primary pool: ssl://eth-us-east.flexpool.io:5555
Starting GPU mining
GPU1: AMD driver 21.1.1
GPU1: AMD Compute mode is not turned on!
Eth: Connecting to ethash pool ssl://eth-us-east.flexpool.io:5555 (proto: EthProxy)
GPU1: 44C 90% 26W
GPUs power: 25.6 W
Eth: Connected to SSL ethash pool eth-us-east.flexpool.io:5555 (34.227.226.103)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #8f97fc82 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #256dd730 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Light cache generated in 2.8 s (23.0 MB/s)
Eth: New job #b73f6b1e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Free VRAM: 7.951 GB; used: 0.049 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #392 (4.06) GB
GPU1: Generating DAG for epoch #392
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 14%
Eth: New job #839c6487 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 28%
Eth: New job #17069082 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #56320c42 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 41%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 55%
Eth: New job #63fade8c from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 69%
GPU1: DAG 83%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 97%
Eth: New job #f0fc78a8 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG generated in 11.2 s (371.0 MB/s)
GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU1: no -gt value specified, switching to auto-tune
GPU1: starting auto-tune process
GPU1: clSetKernelArg (-48) try to add -clkernel 0 on your file batch - should work, but a little bit unstable
Fatal error detected. Restarting.
From 5.5c
*** 1:10 *** 1/31 10:08 **************************************
Eth: Mining ETH on ssl://eth-us-east.flexpool.io:5555 for 1:10
Eth: Accepted shares 13 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 39.8 GH (!)
Eth: Average speed (5 min): 7.600 MH/s
Eth: Effective speed: 12.27 MH/s; at pool: 12.27 MH/s
GPU1: 52C 90% 67W
GPUs power: 67.2 W
Eth: New job #264c922a from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.614 MH/s, shares: 13/0/0, time: 1:10
Eth: New job #95ba9a03 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #846c007e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #e68f89d1 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.613 MH/s, shares: 13/0/0, time: 1:10
I was having an issue with 5.4c for windows where I got a clkernel error 48. I downloaded the new 5.5c and now I am only getting a third of my hashrate that I was getting with 5.4c before the kernel error. I have not changed anything that I had from before.
I have a rx580 8gb card.
Anyone have this issue or know a fix?
From 5.4c
No CUDA driver found
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs
Eth: the pool list contains 1 pool (1 from command-line)
Eth: primary pool: ssl://eth-us-east.flexpool.io:5555
Starting GPU mining
GPU1: AMD driver 21.1.1
GPU1: AMD Compute mode is not turned on!
Eth: Connecting to ethash pool ssl://eth-us-east.flexpool.io:5555 (proto: EthProxy)
GPU1: 44C 90% 26W
GPUs power: 25.6 W
Eth: Connected to SSL ethash pool eth-us-east.flexpool.io:5555 (34.227.226.103)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #8f97fc82 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #256dd730 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Light cache generated in 2.8 s (23.0 MB/s)
Eth: New job #b73f6b1e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Free VRAM: 7.951 GB; used: 0.049 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #392 (4.06) GB
GPU1: Generating DAG for epoch #392
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 14%
Eth: New job #839c6487 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 28%
Eth: New job #17069082 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #56320c42 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 41%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 55%
Eth: New job #63fade8c from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 69%
GPU1: DAG 83%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 97%
Eth: New job #f0fc78a8 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG generated in 11.2 s (371.0 MB/s)
GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU1: no -gt value specified, switching to auto-tune
GPU1: starting auto-tune process
GPU1: clSetKernelArg (-48) try to add -clkernel 0 on your file batch - should work, but a little bit unstable
Fatal error detected. Restarting.
From 5.5c
*** 1:10 *** 1/31 10:08 **************************************
Eth: Mining ETH on ssl://eth-us-east.flexpool.io:5555 for 1:10
Eth: Accepted shares 13 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 39.8 GH (!)
Eth: Average speed (5 min): 7.600 MH/s
Eth: Effective speed: 12.27 MH/s; at pool: 12.27 MH/s
GPU1: 52C 90% 67W
GPUs power: 67.2 W
Eth: New job #264c922a from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.614 MH/s, shares: 13/0/0, time: 1:10
Eth: New job #95ba9a03 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #846c007e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #e68f89d1 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.613 MH/s, shares: 13/0/0, time: 1:10
January 31, 2021, 11:12:48 AM
Hello everyone.
I was having an issue with 5.4c for windows where I got a clkernel error 48. I downloaded the new 5.5c and now I am only getting a third of my hashrate that I was getting with 5.4c before the kernel error. I have not changed anything that I had from before.
I have a rx580 8gb card.
Anyone have this issue or know a fix?
From 5.4c
No CUDA driver found
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs
Eth: the pool list contains 1 pool (1 from command-line)
Eth: primary pool: ssl://eth-us-east.flexpool.io:5555
Starting GPU mining
GPU1: AMD driver 21.1.1
GPU1: AMD Compute mode is not turned on!
Eth: Connecting to ethash pool ssl://eth-us-east.flexpool.io:5555 (proto: EthProxy)
GPU1: 44C 90% 26W
GPUs power: 25.6 W
Eth: Connected to SSL ethash pool eth-us-east.flexpool.io:5555 (34.227.226.103)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #8f97fc82 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #256dd730 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Light cache generated in 2.8 s (23.0 MB/s)
Eth: New job #b73f6b1e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Free VRAM: 7.951 GB; used: 0.049 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #392 (4.06) GB
GPU1: Generating DAG for epoch #392
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 14%
Eth: New job #839c6487 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 28%
Eth: New job #17069082 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #56320c42 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 41%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 55%
Eth: New job #63fade8c from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 69%
GPU1: DAG 83%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 97%
Eth: New job #f0fc78a8 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG generated in 11.2 s (371.0 MB/s)
GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU1: no -gt value specified, switching to auto-tune
GPU1: starting auto-tune process
GPU1: clSetKernelArg (-48)
Fatal error detected. Restarting.
From 5.5c
*** 1:10 *** 1/31 10:08 **************************************
Eth: Mining ETH on ssl://eth-us-east.flexpool.io:5555 for 1:10
Eth: Accepted shares 13 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 39.8 GH (!)
Eth: Average speed (5 min): 7.600 MH/s
Eth: Effective speed: 12.27 MH/s; at pool: 12.27 MH/s
GPU1: 52C 90% 67W
GPUs power: 67.2 W
Eth: New job #264c922a from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.614 MH/s, shares: 13/0/0, time: 1:10
Eth: New job #95ba9a03 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #846c007e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #e68f89d1 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.613 MH/s, shares: 13/0/0, time: 1:10
I was having an issue with 5.4c for windows where I got a clkernel error 48. I downloaded the new 5.5c and now I am only getting a third of my hashrate that I was getting with 5.4c before the kernel error. I have not changed anything that I had from before.
I have a rx580 8gb card.
Anyone have this issue or know a fix?
From 5.4c
No CUDA driver found
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (3188.4)
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 16), OpenCL 2.0, 8 GB VRAM, 36 CUs
Eth: the pool list contains 1 pool (1 from command-line)
Eth: primary pool: ssl://eth-us-east.flexpool.io:5555
Starting GPU mining
GPU1: AMD driver 21.1.1
GPU1: AMD Compute mode is not turned on!
Eth: Connecting to ethash pool ssl://eth-us-east.flexpool.io:5555 (proto: EthProxy)
GPU1: 44C 90% 26W
GPUs power: 25.6 W
Eth: Connected to SSL ethash pool eth-us-east.flexpool.io:5555 (34.227.226.103)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #8f97fc82 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #256dd730 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Light cache generated in 2.8 s (23.0 MB/s)
Eth: New job #b73f6b1e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: Free VRAM: 7.951 GB; used: 0.049 GB
GPU1: Disabling DAG pre-allocation (not enough VRAM)
GPU1: Allocating DAG for epoch #392 (4.06) GB
GPU1: Generating DAG for epoch #392
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 14%
Eth: New job #839c6487 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 28%
Eth: New job #17069082 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #56320c42 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 41%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 55%
Eth: New job #63fade8c from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG 69%
GPU1: DAG 83%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 97%
Eth: New job #f0fc78a8 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
GPU1: DAG generated in 11.2 s (371.0 MB/s)
GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1 -clnew 0)
GPU1: no -gt value specified, switching to auto-tune
GPU1: starting auto-tune process
GPU1: clSetKernelArg (-48)
Fatal error detected. Restarting.
From 5.5c
*** 1:10 *** 1/31 10:08 **************************************
Eth: Mining ETH on ssl://eth-us-east.flexpool.io:5555 for 1:10
Eth: Accepted shares 13 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 39.8 GH (!)
Eth: Average speed (5 min): 7.600 MH/s
Eth: Effective speed: 12.27 MH/s; at pool: 12.27 MH/s
GPU1: 52C 90% 67W
GPUs power: 67.2 W
Eth: New job #264c922a from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.614 MH/s, shares: 13/0/0, time: 1:10
Eth: New job #95ba9a03 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #846c007e from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth: New job #e68f89d1 from ssl://eth-us-east.flexpool.io:5555; diff: 4000MH
Eth speed: 7.613 MH/s, shares: 13/0/0, time: 1:10
Jump to: