PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 176.

sreetglide2011

newbie

Activity: 10

Merit: 0

Quote from: squall50000 on December 09, 2020, 10:04:13 AM

Hello gentlemen,
I have a strange problem only with one rig. I'm using 5.3b and it runs only up to the point where I get the NO CUDA driver found than just stops. Tried running in most basic settings but nothing seems to work. Has anyone come across this? Meanwhile claymore 15 with exactly the same settings runs just fine.
Rig is running with 8x sapphire 570 8GB nitro+, 110GB virtual memory, 4gb ram, i5-7400.
Last setting:
PhoenixMiner.exe -pool XXXX -ewal XXXX -eworker XXXX -epsw XXXX -ftime 10 -cclock 1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2150,2150,2150,2150,2150,2150,2150,2150 -cvddc 900,900,900,900,900,900,900,900 -mvddc 900,900,900,900,900,900,900,900 -tt 60 -fanmin 50 -fanmax 95
pause
Please help!
EDIT sorry I just read the above messages I'm having the same problem like the previous post!

I started having the same problem 2-3 nights ago. I updated the drivers and it fixed the problem

bishkot

newbie

Activity: 12

Merit: 0

Looks like its not me the only one.

Will resetting keep my installed software programs? Will it keep files on drive C where my windows is installed?

Will give it a try
Many thanks

pr0ximus

full member

Activity: 142

Merit: 100

Quote from: squall50000 on December 09, 2020, 10:04:13 AM

Hello gentlemen,
I have a strange problem only with one rig. I'm using 5.3b and it runs only up to the point where I get the NO CUDA driver found than just stops. Tried running in most basic settings but nothing seems to work. Has anyone come across this? Meanwhile claymore 15 with exactly the same settings runs just fine.
Rig is running with 8x sapphire 570 8GB nitro+, 110GB virtual memory, 4gb ram, i5-7400.
Last setting:
PhoenixMiner.exe -pool XXXX -ewal XXXX -eworker XXXX -epsw XXXX -ftime 10 -cclock 1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2150,2150,2150,2150,2150,2150,2150,2150 -cvddc 900,900,900,900,900,900,900,900 -mvddc 900,900,900,900,900,900,900,900 -tt 60 -fanmin 50 -fanmax 95
pause
Please help!
EDIT sorry I just read the above messages I'm having the same problem like the previous post!

You could follow the same solution I posted as well and try your luck.

pr0ximus

full member

Activity: 142

Merit: 100

Quote from: bishkot on December 09, 2020, 09:58:15 AM

Quote from: pr0ximus on December 09, 2020, 08:49:08 AM

Quote from: bishkot on December 09, 2020, 08:29:11 AM

Hi guys,
as claymore stopped working i switched to phoenix mine 5.3b

At first everything was working.

I noticed the Google Meet icon appeared down at the right corner (maybe windows updated itself )

Im using Win 10 and sapphire rx580 8gb nitro+

Phoenix stopped working and also no other miner works atm. Lol, claymore etc..
All i see is NO CUDA Driver and then

Tried to reinstall AMD drivers - currently I'm using Adrenalin 2020 Edition 20.4.1
Tried to disable Defender and i noticed i cannot add exclusuin folders anymore and also my exclusion folders that i added before are gone from the exclusion list.

Should i try reinstalling windows if yes what win 10 version and amd rx580 driver combination to try?
I have 10X GPUS

Please advise.

Unfortunately, it could be due to some dll issue. Try this https://bitcointalksearch.org/topic/m.40251658

So will reinstalling latest windows + AMD drivers fix the issue?

Yes. Just 'reset' the windows rather than reinstalling. Hopefully that would solve your issue, as it did for me.

squall50000

newbie

Activity: 8

Merit: 0

Hello gentlemen,
I have a strange problem only with one rig. I'm using 5.3b and it runs only up to the point where I get the NO CUDA driver found than just stops. Tried running in most basic settings but nothing seems to work. Has anyone come across this? Meanwhile claymore 15 with exactly the same settings runs just fine.
Rig is running with 8x sapphire 570 8GB nitro+, 110GB virtual memory, 4gb ram, i5-7400.
Last setting:
PhoenixMiner.exe -pool XXXX -ewal XXXX -eworker XXXX -epsw XXXX -ftime 10 -cclock 1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2150,2150,2150,2150,2150,2150,2150,2150 -cvddc 900,900,900,900,900,900,900,900 -mvddc 900,900,900,900,900,900,900,900 -tt 60 -fanmin 50 -fanmax 95
pause
Please help!
EDIT sorry I just read the above messages I'm having the same problem like the previous post!

bishkot

newbie

Activity: 12

Merit: 0

Quote from: pr0ximus on December 09, 2020, 08:49:08 AM

Quote from: bishkot on December 09, 2020, 08:29:11 AM

Hi guys,
as claymore stopped working i switched to phoenix mine 5.3b

At first everything was working.

I noticed the Google Meet icon appeared down at the right corner (maybe windows updated itself )

Im using Win 10 and sapphire rx580 8gb nitro+

Phoenix stopped working and also no other miner works atm. Lol, claymore etc..
All i see is NO CUDA Driver and then
https://ibb.co/M8yFcB1

Tried to reinstall AMD drivers - currently I'm using Adrenalin 2020 Edition 20.4.1
Tried to disable Defender and i noticed i cannot add exclusuin folders anymore and also my exclusion folders that i added before are gone from the exclusion list.

Should i try reinstalling windows if yes what win 10 version and amd rx580 driver combination to try?
I have 10X GPUS

Please advise.

Unfortunately, it could be due to some dll issue. Try this https://bitcointalksearch.org/topic/m.40251658

So will reinstalling latest windows + AMD drivers fix the issue?

pr0ximus

full member

Activity: 142

Merit: 100

Quote from: sxemini on December 09, 2020, 08:57:38 AM

Quote from: LukaL on December 08, 2020, 01:33:44 PM

Hello guys... I need some help here.

I switched my gpus (gtx 1070 8gb) to ETH after a long time, and what I see is some strange behavior. It seems that hashrate is low, and memory overclock doesn't have any effect.
What I was able to google out is that apparently when there is more than 50% of 1070's gpu memory utilized it starts to behave strangely. When I try mining ETC everything is normal (sure ETC have DAG size much lower, after fork).
So mining ETC I am able to get 33 MHs at 90W with underclock and undervolt core and overclocked memory as much as possible, while
mining ETH I get 28 MHs at 115W (overclocked nd undervolted core, little overclock on memory) ... you see my despair Cheesy

... also mining ETH overclockin core have positive effect on hashrate, while overclocking memory doesn't have any impact - which is not normal for ethash.

It happens the same on windows or linux (hive os), the same on all miners (lol miner, phoenix miner, t-rex miner ...)

I was not able to find any solution to this.
So is there any workaround this issue?
Thanks for your help Wink Cheers

it is normal for the Nvidia Pascal GPU´s (all gtx 10x0) This cards slow down with every new DAG epoch, same HARDWARE bug as the AMD R9 290 and R9 390 had in the past.
So there is no solution. You can check this, if you benchmark ETH in Epoch 0 and Epoch 400 for example.

My P106 cards do 26mh at the beginning, now i am down to 24mh.

on ETH, my P106 cards still does 25.5mh or above consistently. I'm using the latest driver and PM 5.3b. My settings are PL +78, TL +73, CC +165, MC +915, Fan @85. Each card draws around 93W power.

sxemini

member

Activity: 1558

Merit: 69

Quote from: LukaL on December 08, 2020, 01:33:44 PM

Hello guys... I need some help here.

I switched my gpus (gtx 1070 8gb) to ETH after a long time, and what I see is some strange behavior. It seems that hashrate is low, and memory overclock doesn't have any effect.
What I was able to google out is that apparently when there is more than 50% of 1070's gpu memory utilized it starts to behave strangely. When I try mining ETC everything is normal (sure ETC have DAG size much lower, after fork).
So mining ETC I am able to get 33 MHs at 90W with underclock and undervolt core and overclocked memory as much as possible, while
mining ETH I get 28 MHs at 115W (overclocked nd undervolted core, little overclock on memory) ... you see my despair Cheesy

... also mining ETH overclockin core have positive effect on hashrate, while overclocking memory doesn't have any impact - which is not normal for ethash.

It happens the same on windows or linux (hive os), the same on all miners (lol miner, phoenix miner, t-rex miner ...)

I was not able to find any solution to this.
So is there any workaround this issue?
Thanks for your help Wink Cheers

it is normal for the Nvidia Pascal GPU´s (all gtx 10x0) This cards slow down with every new DAG epoch, same HARDWARE bug as the AMD R9 290 and R9 390 had in the past.
So there is no solution. You can check this, if you benchmark ETH in Epoch 0 and Epoch 400 for example.

My P106 cards do 26mh at the beginning, now i am down to 24mh.

pr0ximus

full member

Activity: 142

Merit: 100

Quote from: bishkot on December 09, 2020, 08:29:11 AM

Hi guys,
as claymore stopped working i switched to phoenix mine 5.3b

At first everything was working.

I noticed the Google Meet icon appeared down at the right corner (maybe windows updated itself )

Im using Win 10 and sapphire rx580 8gb nitro+

Phoenix stopped working and also no other miner works atm. Lol, claymore etc..
All i see is NO CUDA Driver and then

Tried to reinstall AMD drivers - currently I'm using Adrenalin 2020 Edition 20.4.1
Tried to disable Defender and i noticed i cannot add exclusuin folders anymore and also my exclusion folders that i added before are gone from the exclusion list.

Should i try reinstalling windows if yes what win 10 version and amd rx580 driver combination to try?
I have 10X GPUS

Please advise.

Unfortunately, it could be due to some dll issue. Try this https://bitcointalksearch.org/topic/m.40251658

bishkot

newbie

Activity: 12

Merit: 0

Hi guys,
as claymore stopped working i switched to phoenix mine 5.3b

At first everything was working.

I noticed the Google Meet icon appeared down at the right corner (maybe windows updated itself )

Im using Win 10 and sapphire rx580 8gb nitro+

Phoenix stopped working and also no other miner works atm. Lol, claymore etc..
All i see is NO CUDA Driver and then
https://ibb.co/M8yFcB1

Tried to reinstall AMD drivers - currently I'm using Adrenalin 2020 Edition 20.4.1
Tried to disable Defender and i noticed i cannot add exclusuin folders anymore and also my exclusion folders that i added before are gone from the exclusion list.

Should i try reinstalling windows if yes what win 10 version and amd rx580 driver combination to try?
I have 10X GPUS

Please advise.

soda37

jr. member

Activity: 63

Merit: 1

Hi @PhoenixMiner

I've recently switched from Claymore miner and very happy with 5.3b version except that intermittently miner reports 0 as average speed. If I press "s" right away, it shows correct values. As a result, I can't use "minspeed" option, rig starts to reboot despite that in fact 5 min average is ok.

Drivers are 20.11.2 WHQL.

Biterion

newbie

Activity: 38

Merit: 0

Quote from: Johndrc on December 09, 2020, 04:42:25 AM

Phoenix 5.3b so many stuck thread issue compare to last version much better in Eth

i think i'am stupid miner
meanwhile, I'm running another miner
There were no problems until DAG # 380
all 8Gb VRAM cards cannot run using PM
no updates and explanations
very sad

Johndrc

newbie

Activity: 4

Merit: 0

Phoenix 5.3b so many stuck thread issue compare to last version much better in Eth

Biterion

newbie

Activity: 38

Merit: 0

Quote from: Deafran on December 08, 2020, 10:41:53 PM

Quote from: Biterion on December 08, 2020, 08:18:21 AM

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #380 (3.97) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU6: Allocating DAG (3.98) GB; good for epoch up to #382

still get error like this for all my card RX480 8Gb
win10
AMD driver 20.4.2
virtual memory on drive C (page file): = 55900

any suggestion ? help, please

may be can help
https://bitcointalksearch.org/topic/--5292588

still getting same error..
try with PM 5.0e until 5.3b still can't run to mine

get same notice:
Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.

repeat and repeat again.. Huh

help, please

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: Biterion on December 08, 2020, 08:18:21 AM

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #380 (3.97) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU6: Allocating DAG (3.98) GB; good for epoch up to #382

still get error like this for all my card RX480 8Gb
win10
AMD driver 20.4.2
virtual memory on drive C (page file): = 55900

any suggestion ? help, please

may be can help
https://bitcointalksearch.org/topic/--5292588

miner29

full member

Activity: 1275

Merit: 141

Quote from: ivannz on December 08, 2020, 07:50:28 PM

Quote from: miner29 on December 08, 2020, 07:01:48 PM

Quote from: ivannz on December 08, 2020, 06:39:21 PM

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?

I think you do not understand the conception behind Windows 10; why is made, when you need that "update", what you need and why you need.

Please do not post noob replies about that post. Only technical resolves or analyses - if you have such.
Thank you.

Thanks for pointing out my noob answer. Roll Eyes

Im well aware of what win10 is.

I did not advise anything except point out that the os you are using is deprecated by MS about a year ago which does have an effect on the situation.

My linux rigs, all 30 are running just fine without a single issue.

Best of luck getting it solved.

ivannz

newbie

Activity: 2

Merit: 0

Quote from: miner29 on December 08, 2020, 07:01:48 PM

Quote from: ivannz on December 08, 2020, 06:39:21 PM

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?

I think you do not understand the conception behind Windows 10; why is made, when you need that "update", what you need and why you need.

Please do not post noob replies about that post. Only technical resolves or analyses - if you have such.
Thank you.

miner29

full member

Activity: 1275

Merit: 141

Quote from: ivannz on December 08, 2020, 06:39:21 PM

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?

ivannz

newbie

Activity: 2

Merit: 0

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

p.s. Lolminer and Nanominer works fine as previous post.

Pe_Da

jr. member

Activity: 58

Merit: 5

Quote from: DejavuUS on December 08, 2020, 12:55:18 PM

Quote from: Pe_Da on December 08, 2020, 12:30:20 PM

Quote from: DejavuUS on December 08, 2020, 06:58:16 AM

Hi All,

Anyone currently using RX 6800 with Phoenix miner what Hash rate are you getting and what are your settings granted there is no available bios mode yet.

Thanks in advance.

Optimized 63-65 Mhs @ 150W with my RX6800 but not really stable. I´ve got some invalid shares ....
Not optimized and adjusted yet!

@developer, how is the current status?

Thanks Good to know, do you care to share your settings, perhaps I might be lucky with the silicon on mine? Thanks in advance.

I meant PhoenixMiner is not adjusted to mine with the RX6000 Series, I´ve got invalid shares with standard clocks as well.
But only with Phoenix, Lolminer and Nanominer for example works fine but with slightly lower hashrate (62-63 M/hs) ...

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 176. (Read 784857 times)