PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 186.

666serbia

newbie

Activity: 9

Merit: 0

I had trouble connecting and it fixed with adding -proto 4 for mining on miningpoolhub. Also I had to return to original ROM for RX570 Nitro + 8GB

zeef

newbie

Activity: 301

Merit: 0

Quote from: dastardlyman12 on December 02, 2020, 11:12:44 AM

windows 10 version 2004
amd driver 20.3.1
latest phoenix miner
two rigs both with 2 radeon VIIs

at dag switch to 379 both rigs went from 83 mHash per card to 75 mhash per card
the gt value was 50 on all cards
so re-ran phoenix and got new gt value of 6
but cards only recovered to 80.5 mhash

so the radeon VIIs have lost a little hash.
there was defintely some weirdness at dag switch over.
would love to get those missing hashes back. is driver 20.3.1 the problem??
great work phoenix . thank you for your time sorting these issues for us all.

Hello,

Same problem here,
I got one rig with vega 64, another with rx 580, and an individuall pc with vega 64.
All gpus lost 1mh/s or more without i doing anyting.
Use 19.5.2 drivers on rigs and latest ones in my pc.

Any idea? disable my fixed -gt value dont fix problem too

Thanks Cool

dystr0x

newbie

Activity: 6

Merit: 0

Quote from: dastardlyman12 on December 02, 2020, 11:12:44 AM

windows 10 version 2004
amd driver 20.3.1
two rigs both with 2 radeon VIIs

at dag switch to 379 both rigs went from 83 mHash per card to 75 mhash per card
the gt value was 50 on all cards
so re-ran phoenix and got new gt value of 6
but cards only recovered to 80.5 mhash

so the radeon VIIs have lost a little hash.
there was defintely some weirdness at dag switch over.
would love to get those missing hashes back. is driver 20.3.1 the problem??
great work phoenix . thank you for your time sorting these issues for us all.

Phoenix will have to fix the issue, its nothing wrong with your drivers. He fixed it once before , just be patient :>

dastardlyman12

newbie

Activity: 21

Merit: 0

windows 10 version 2004
amd driver 20.3.1
latest phoenix miner
two rigs both with 2 radeon VIIs

at dag switch to 379 both rigs went from 83 mHash per card to 75 mhash per card
the gt value was 50 on all cards
so re-ran phoenix and got new gt value of 6
but cards only recovered to 80.5 mhash

so the radeon VIIs have lost a little hash.
there was defintely some weirdness at dag switch over.
would love to get those missing hashes back. is driver 20.3.1 the problem??
great work phoenix . thank you for your time sorting these issues for us all.

gi4ev

newbie

Activity: 5

Merit: 0

Posted this and saw the problem - do you see what is infront of address - that's the bug, not sure how it got there when copying from claymore, however BEWARE, check carefully ( this little symbol is not visible anywhere unless you paste the whole thing in text editor - like notepad or here in forum).

This is how I saw it, hope this helps anyone.

gi4ev

newbie

Activity: 5

Merit: 0

Win 10
rx580 SE 8 gb
Phoenix 5.3b

@echo off
timeout /t 15
call C:\overdriven\ETH.bat
timeout /t 5

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)
PhoenixMiner.exe -fanmin 40 -ttli 70 -tstop 75 -epool eu1.ethermine.org:4444 -ewal 0x3B76E7ab7aE5770f278Af2b95E607bEB8917CfF0.GB3
pause

bategojko74

member

Activity: 220

Merit: 12

Quote from: sxemini on December 02, 2020, 09:57:59 AM

Quote from: gi4ev on December 02, 2020, 08:08:09 AM

DID anyone GET A SOLUTION for this: Huh

ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)

ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (172.65.207.109)

POOL LOGIN FAILED: INVALID JSON REQUEST

ETH: RECONNECTING IN 5 SECONDS...

LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODE

Any idea how to resolve this?

I get it on ethermine / sparkpool / nanopool

without your commandline, your os, what cards, and so on, no one can help you.

Miner doesn't work on nonencrypted port 4444. Use ssl://eu1.ethermine.org:5555

sxemini

member

Activity: 1558

Merit: 69

Quote from: gi4ev on December 02, 2020, 08:08:09 AM

DID anyone GET A SOLUTION for this: Huh

ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)

ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (172.65.207.109)

POOL LOGIN FAILED: INVALID JSON REQUEST

ETH: RECONNECTING IN 5 SECONDS...

LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODE

Any idea how to resolve this?

I get it on ethermine / sparkpool / nanopool

without your commandline, your os, what cards, and so on, no one can help you.

sxemini

member

Activity: 1558

Merit: 69

Quote from: dejan_p on December 02, 2020, 09:13:27 AM

two rigs stopped working today, sapphire nitro+ 8gb

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #379 (3.96) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).

win7 64bit, blockchain beta drivers
restored original bios, installed 20.4.2., same thing
let us know if you manage to fix it, thanks

how much virtual ram?
test another miner like teamred and if it is run, let us know and we look again.
add -eres 0 for test

change os to win10.

sxemini

member

Activity: 1558

Merit: 69

Quote from: fomkas on December 02, 2020, 06:47:19 AM

registered port on HiveOS

still does not connect

is there a solution?

you can´t change api port in hiveOS. because you loose all your information in hiveos. The api port for phönixminer is set to 3335 as default.

ivcelmik

sr. member

Activity: 519

Merit: 250

Yes today i had a lot of problems with my rigs too and they are 8GB

dejan_p

member

Activity: 132

Merit: 11

two rigs stopped working today, sapphire nitro+ 8gb

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #379 (3.96) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).

win7 64bit, blockchain beta drivers
restored original bios, installed 20.4.2., same thing
let us know if you manage to fix it, thanks

agabellini

newbie

Activity: 11

Merit: 0

Quote from: UnclWish on December 02, 2020, 08:40:32 AM

Yes, update driver at least to version 20.4.2. And use amd drivers patcher.

Ok thanks! Is the latest 20.11.2 (WHQL) supported?

AMD drivers patcher it's not just for modified VBIOS?

Thanks,
Andrea

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: agabellini on December 02, 2020, 08:26:44 AM

Hello,

I just switched from Claymore 15 to PhoenixMiner 5.3b.

Windows 10 with mining driver 17.8 beta and one RX470 8GB. Running the mining software as Administrator.

The video card use the default BIOS and all moddings are done throuth the mining software.

I have two problems:

- I can't set the -mt value. I get this error: "hwmc GPU1: Unable to set VMEM timing to 1 - error: -8".
- I can't set the -mvddc. In this case no error occours. The miner hangs without any message!!!

What could be the problem? Is the driver too old?

Thanks,
Andrea

Yes, update driver at least to version 20.4.2. And use amd drivers patcher.

agabellini

newbie

Activity: 11

Merit: 0

Hello,

I just switched from Claymore 15 to PhoenixMiner 5.3b.

Windows 10 with mining driver 17.8 beta and one RX470 8GB. Running the mining software as Administrator.

The video card use the default BIOS and all moddings are done throuth the mining software.

I have two problems:

- I can't set the -mt value. I get this error: "hwmc GPU1: Unable to set VMEM timing to 1 - error: -8".
- I can't set the -mvddc. In this case no error occours. The miner hangs without any message!!!

What could be the problem? Is the driver too old?

Thanks,
Andrea

gi4ev

newbie

Activity: 5

Merit: 0

DID anyone GET A SOLUTION for this: Huh

ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)

ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (172.65.207.109)

POOL LOGIN FAILED: INVALID JSON REQUEST

ETH: RECONNECTING IN 5 SECONDS...

LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODE

https://i.ibb.co/Dkc4spL/2020-12-02-12-27-12.png

Any idea how to resolve this?

I get it on ethermine / sparkpool / nanopool

dystr0x

newbie

Activity: 6

Merit: 0

Quote from: vectisitch on December 02, 2020, 07:31:17 AM

Quote from: dystr0x on December 02, 2020, 07:06:02 AM

Quote from: vectisitch on December 02, 2020, 07:01:52 AM

i have set my bat file up exactly how it says and i just keep getting the not recognised as an internal command, bat file error

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -epool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x
pause

Anyone see a problem with this??

you are running it as admin so the phoenixminer.exe needs the directory of the program i.e "C:\phoenixminer\phoenixminer.exe"

how does this look?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\Users\vecti\Desktop\PhoenixMiner -epool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x
pause

i am still getting the not recognised as internal or external command error

"C:\Users\vecti\Desktop\PhoenixMiner\PhoenixMiner.exe" -pool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x

vectisitch

legendary

Activity: 1927

Merit: 1004

Quote from: batsonxl on December 02, 2020, 07:37:06 AM

Quote from: vectisitch on December 02, 2020, 07:01:52 AM

i have set my bat file up exactly how it says and i just keep getting the not recognised as an internal command, bat file error

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -epool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x
pause

Anyone see a problem with this??

ofcourse problem where people are lookin and not reading at all. Look at 1st page.
ethermine.org (ETH):
PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal YourEthWalletAddress.WorkerName -proto 3

what is epool??? it was in claymore epool pay attantion its pool. and also no need write worker just add like this wallet.Rig1

i have tried that. i've been mining since 2013 but i can't get this working. i tried this

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\Users\vecti\Desktop\PhoenixMiner -pool eth-eu2.nanopool.org:9999 -wal my wallet/rig1 -pass x
pause

batsonxl

member

Activity: 1201

Merit: 26

Quote from: vectisitch on December 02, 2020, 07:01:52 AM

i have set my bat file up exactly how it says and i just keep getting the not recognised as an internal command, bat file error

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -epool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x
pause

Anyone see a problem with this??

ofcourse problem where people are lookin and not reading at all. Look at 1st page.
ethermine.org (ETH):
PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal YourEthWalletAddress.WorkerName -proto 3

what is epool??? it was in claymore epool pay attantion its pool. and also no need write worker just add like this wallet.Rig1

vectisitch

legendary

Activity: 1927

Merit: 1004

Quote from: dystr0x on December 02, 2020, 07:06:02 AM

Quote from: vectisitch on December 02, 2020, 07:01:52 AM

i have set my bat file up exactly how it says and i just keep getting the not recognised as an internal command, bat file error

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -epool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x
pause

Anyone see a problem with this??

you are running it as admin so the phoenixminer.exe needs the directory of the program i.e "C:\phoenixminer\phoenixminer.exe"

how does this look?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\Users\vecti\Desktop\PhoenixMiner -epool eth-eu2.nanopool.org:9999 -worker rig1 -wal my wallet address -pass x
pause

i am still getting the not recognised as internal or external command error

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 186. (Read 784965 times)