PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 293.

angelbbs

full member

Activity: 1179

Merit: 209

Quote from: melpheos on March 06, 2020, 07:45:37 PM

Quote from: waywoos on March 06, 2020, 07:02:31 PM

did you run ddu and select gpu and then select nvidia?
you can select between 3 of them.

Yes, I think something happened between november and a month ago when I run ethash mining again but I have no idea what.
I have an image of my disk from start of 2019. I will image it back on one of my rig or test with a linux machine to see.
With my gaming computer which I dont use for mining I have better performance with a 1070...
Also, this impact ONLY ethash... This is very strange.

https://bitcointalksearch.org/topic/m.53882691

Bohr256

jr. member

Activity: 77

Merit: 1

Quote from: joaogti36 on March 05, 2020, 12:54:31 PM

Quote from: sxemini on March 05, 2020, 07:54:44 AM

Quote from: joaogti36 on March 04, 2020, 02:54:18 PM

anyone else also losing hashrate in the nvidias 1070??? is there a fix so we don't need to push power/core in the cards?

i described so often. It is the same as with AMD R9 290/ R9 390. You will loose hashrate after every new epoch.

and is there a fix to it? Huh

There is nothing to 'fix' because theres nothing wrong with our gear, it's simply caused by the epoch size. Soon, most 4gb gpus/asics will not work at all.

melpheos

jr. member

Activity: 557

Merit: 5

Quote from: waywoos on March 06, 2020, 07:02:31 PM

did you run ddu and select gpu and then select nvidia?
you can select between 3 of them.

Yes, I think something happened between november and a month ago when I run ethash mining again but I have no idea what.
I have an image of my disk from start of 2019. I will image it back on one of my rig or test with a linux machine to see.
With my gaming computer which I dont use for mining I have better performance with a 1070...
Also, this impact ONLY ethash... This is very strange.

waywoos

jr. member

Activity: 124

Merit: 2

did you run ddu and select gpu and then select nvidia?
you can select between 3 of them.

melpheos

jr. member

Activity: 557

Merit: 5

Ran DDU again... Still getting half the speed I should get on a 1070ti :-/ (around 17Mh/s)
Very confused at what to do next.
All other mining algorithm gives me normal speed...
Is it possible on nvidia card that memory timing get corrupted for some reason ?

Trehjulingsleffe

newbie

Activity: 17

Merit: 0

After bios mod on my Red Devil RX 5700XT and running for 2 hour i can say it's stable and doesnt consume more than 5 watt more than before.
Boosted from 51,3mhs to 56,3mhs.

Just followed the guide on youtube as posted a couple of posts back. Thanks!
Is it possible that more "skilled bios modders" could tweak bioses a bit better than just copy 1500 timings?

https://i.imgur.com/Wj6f20u.png

Best regard //Trehjulingsleffe

mineshop.eu

copper member

Activity: 406

Merit: 59

Quote from: br2459 on March 04, 2020, 02:02:41 PM

Quote from: mineshop.eu on March 04, 2020, 06:57:18 AM

BIOS modded timings RX5700 - 58-50 mh/s
https://www.youtube.com/watch?v=d-AwOPJQH_4&t

I watched the video and it does look doable. He had it running for 20mins with 2 cards and 0 incorrect/rejected shares at around 58MH/s. I just wonder if you have to use the pixel patcher in Windows after the BIOS mod..

I have 3 cards running 24 hours without any invalid shares.
Some cards have different timings ill have another video soon. Some available to achieve little bit less speed. But still there are improvements, with the right timings speed improvements are noticeable .
There is no need for pixel patcher , here is another rig http://prntscr.com/rcivqr

dastardlyman12

newbie

Activity: 21

Merit: 0

can confirm that modded bioses on rx5700 are working
my bog standard cheap blower can get 57 megahash
but its better at 56.1- that way i can keep blower quiet

using 1370 core 770mv core volts 1820 ram speed
it gets 56.1 megahash with those settings
im using the 1500 ram straps
about 120watts at the wall
no bad shares at all
props to igors lab and others for getting this mod out
follow instructions carefully its a two stage process with
a special version of atiflash

look at guntisvitolins youtube channel

joaogti36

full member

Activity: 162

Merit: 100

Quote from: sxemini on March 05, 2020, 07:54:44 AM

Quote from: joaogti36 on March 04, 2020, 02:54:18 PM

anyone else also losing hashrate in the nvidias 1070??? is there a fix so we don't need to push power/core in the cards?

i described so often. It is the same as with AMD R9 290/ R9 390. You will loose hashrate after every new epoch.

and is there a fix to it? Huh

Pe_Da

jr. member

Activity: 58

Merit: 5

I´ve got stability issues with my two new RX 5600XT cards in my rig, is that already known? And just for notice, with the claymore miner as well.

sxemini

member

Activity: 1558

Merit: 69

Quote from: motomart on March 04, 2020, 07:51:54 PM

Quote from: UnclWish on March 04, 2020, 09:54:56 AM

Quote from: motomart on March 04, 2020, 09:46:01 AM

Can you guys explain this to me.... Several times I've noticed miner is switching from DAG epoch 329 to 'Generating DAG epoch #0'. I have a mix of 1070, 1060 and 104-100 cards. My 1070 cards are doing 32+ MHs for a short time then miner is restarting with DAG epoch 329 and cards are doing about 27MHs. I understand it's slowing down with bigger DAG but what is DAG for epoch #0.

2020.03.03:15:55:49.480: GPU4 GPU4: Starting up... (0)
2020.03.03:15:55:49.531: GPU6 GPU6: Starting up... (0)
2020.03.03:15:55:49.542: GPU5 GPU5: Starting up... (0)
2020.03.03:15:55:49.561: GPU3 GPU3: Starting up... (0)
2020.03.03:15:55:49.585: GPU2 GPU2: Starting up... (0)
2020.03.03:15:55:49.600: GPU8 GPU8: Starting up... (0)
2020.03.03:15:55:49.708: GPU1 GPU1: Starting up... (0)
2020.03.03:15:55:50.463: GPU7 Light cache generated in 1.0 s (15.4 MB/s)
2020.03.03:15:55:50.463: GPU7 GPU7: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU4 GPU4: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU6 GPU6: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU5 GPU5: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU3 GPU3: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU2 GPU2: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU8 GPU8: Generating DAG for epoch #0
2020.03.03:15:55:50.465: GPU1 GPU1: Generating DAG for epoch #0
.
.
2020.03.03:15:56:00.753: main GPUs: 1: 31.981 MH/s (29) 2: 32.471 MH/s (31) 3: 32.563 MH/s (27) 4: 23.654 MH/s (27) 5: 32.588 MH/s (31) 6: 40.112 MH/s (46) 7: 40.876 MH/s (42) 8: 23.580 MH/s (34)

It's nicehash pool? If so - nicehash can switch on the fly between different eth forks, so it can change DAG's. DAG #0 - is one of this switches to some fork untill it give better profit.

Thanks. Yes it is nicehash. Is it just idling at that time or doing shares?

Why your miner starts with epoch 0. Thats the failure. With Epoch 0 you have full speed, but the Nvidia Pascal cards loose speed with every new Epoch. So 27 is normal with no OC. My 1070 reach 29 - 30 mh at the moment with claymore and tied straps.

sxemini

member

Activity: 1558

Merit: 69

Quote from: joaogti36 on March 04, 2020, 02:54:18 PM

anyone else also losing hashrate in the nvidias 1070??? is there a fix so we don't need to push power/core in the cards?

i described so often. It is the same as with AMD R9 290/ R9 390. You will loose hashrate after every new epoch.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: motomart on March 04, 2020, 07:51:54 PM

Quote from: UnclWish on March 04, 2020, 09:54:56 AM

Quote from: motomart on March 04, 2020, 09:46:01 AM

Can you guys explain this to me.... Several times I've noticed miner is switching from DAG epoch 329 to 'Generating DAG epoch #0'. I have a mix of 1070, 1060 and 104-100 cards. My 1070 cards are doing 32+ MHs for a short time then miner is restarting with DAG epoch 329 and cards are doing about 27MHs. I understand it's slowing down with bigger DAG but what is DAG for epoch #0.

2020.03.03:15:55:49.480: GPU4 GPU4: Starting up... (0)
2020.03.03:15:55:49.531: GPU6 GPU6: Starting up... (0)
2020.03.03:15:55:49.542: GPU5 GPU5: Starting up... (0)
2020.03.03:15:55:49.561: GPU3 GPU3: Starting up... (0)
2020.03.03:15:55:49.585: GPU2 GPU2: Starting up... (0)
2020.03.03:15:55:49.600: GPU8 GPU8: Starting up... (0)
2020.03.03:15:55:49.708: GPU1 GPU1: Starting up... (0)
2020.03.03:15:55:50.463: GPU7 Light cache generated in 1.0 s (15.4 MB/s)
2020.03.03:15:55:50.463: GPU7 GPU7: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU4 GPU4: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU6 GPU6: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU5 GPU5: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU3 GPU3: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU2 GPU2: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU8 GPU8: Generating DAG for epoch #0
2020.03.03:15:55:50.465: GPU1 GPU1: Generating DAG for epoch #0
.
.
2020.03.03:15:56:00.753: main GPUs: 1: 31.981 MH/s (29) 2: 32.471 MH/s (31) 3: 32.563 MH/s (27) 4: 23.654 MH/s (27) 5: 32.588 MH/s (31) 6: 40.112 MH/s (46) 7: 40.876 MH/s (42) 8: 23.580 MH/s (34)

It's nicehash pool? If so - nicehash can switch on the fly between different eth forks, so it can change DAG's. DAG #0 - is one of this switches to some fork untill it give better profit.

Thanks. Yes it is nicehash. Is it just idling at that time or doing shares?

It's finds shares on any fork or DAG. Just not always have time till DAG changes back.

Zergas87

newbie

Activity: 3

Merit: 0

Quote from: battlecryx on March 01, 2020, 07:45:27 AM

Hello there, i'm testing a rx 5700 XT and a rx 5700, the XT get cclock drops to 700mhz lowering the hashrate from 52-53 to 30-35, sometimes is random.. i tried the stock settings and others settings from the forum and youtube, still the same problem.

Also do you guys know if the AMD adrenaline software has the feature for compute mode?, i can't find it.

Good luck miners!

I have the same problem. cclock drops to 700 mhz, and mining speed also!
https://i.ibb.co/VYRQsLL/RX5700-cclock-auto-decreasing.png
rx5700 ASROCK Chalenger. WHO SOLVED THAT PROBLEM? Huh

NCarter84

jr. member

Activity: 195

Merit: 4

Quote from: br2459 on March 04, 2020, 02:02:41 PM

Quote from: mineshop.eu on March 04, 2020, 06:57:18 AM

BIOS modded timings RX5700 - 58-50 mh/s
https://www.youtube.com/watch?v=d-AwOPJQH_4&t

I watched the video and it does look doable. He had it running for 20mins with 2 cards and 0 incorrect/rejected shares at around 58MH/s. I just wonder if you have to use the pixel patcher in Windows after the BIOS mod..

no pixal patcher...

Mines been running now for 2.5 hours with no rejected shares.... Pool side is still lower than what miner is reporting but need a longer sample size than 2.5 hours.

motomart

newbie

Activity: 23

Merit: 0

Quote from: UnclWish on March 04, 2020, 09:54:56 AM

Quote from: motomart on March 04, 2020, 09:46:01 AM

Can you guys explain this to me.... Several times I've noticed miner is switching from DAG epoch 329 to 'Generating DAG epoch #0'. I have a mix of 1070, 1060 and 104-100 cards. My 1070 cards are doing 32+ MHs for a short time then miner is restarting with DAG epoch 329 and cards are doing about 27MHs. I understand it's slowing down with bigger DAG but what is DAG for epoch #0.

2020.03.03:15:55:49.480: GPU4 GPU4: Starting up... (0)
2020.03.03:15:55:49.531: GPU6 GPU6: Starting up... (0)
2020.03.03:15:55:49.542: GPU5 GPU5: Starting up... (0)
2020.03.03:15:55:49.561: GPU3 GPU3: Starting up... (0)
2020.03.03:15:55:49.585: GPU2 GPU2: Starting up... (0)
2020.03.03:15:55:49.600: GPU8 GPU8: Starting up... (0)
2020.03.03:15:55:49.708: GPU1 GPU1: Starting up... (0)
2020.03.03:15:55:50.463: GPU7 Light cache generated in 1.0 s (15.4 MB/s)
2020.03.03:15:55:50.463: GPU7 GPU7: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU4 GPU4: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU6 GPU6: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU5 GPU5: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU3 GPU3: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU2 GPU2: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU8 GPU8: Generating DAG for epoch #0
2020.03.03:15:55:50.465: GPU1 GPU1: Generating DAG for epoch #0
.
.
2020.03.03:15:56:00.753: main GPUs: 1: 31.981 MH/s (29) 2: 32.471 MH/s (31) 3: 32.563 MH/s (27) 4: 23.654 MH/s (27) 5: 32.588 MH/s (31) 6: 40.112 MH/s (46) 7: 40.876 MH/s (42) 8: 23.580 MH/s (34)

It's nicehash pool? If so - nicehash can switch on the fly between different eth forks, so it can change DAG's. DAG #0 - is one of this switches to some fork untill it give better profit.

Thanks. Yes it is nicehash. Is it just idling at that time or doing shares?

darkCryptoMiner

newbie

Activity: 30

Merit: 0

Quote from: joaogti36 on March 04, 2020, 02:54:18 PM

anyone else also losing hashrate in the nvidias 1070??? is there a fix so we don't need to push power/core in the cards?

Yup, same with me.. 0.1 to 0.3 drop in the last month or two

joaogti36

full member

Activity: 162

Merit: 100

anyone else also losing hashrate in the nvidias 1070??? is there a fix so we don't need to push power/core in the cards?

br2459

full member

Activity: 269

Merit: 102

Quote from: mineshop.eu on March 04, 2020, 06:57:18 AM

BIOS modded timings RX5700 - 58-50 mh/s
https://www.youtube.com/watch?v=d-AwOPJQH_4&t

I watched the video and it does look doable. He had it running for 20mins with 2 cards and 0 incorrect/rejected shares at around 58MH/s. I just wonder if you have to use the pixel patcher in Windows after the BIOS mod..

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: motomart on March 04, 2020, 09:46:01 AM

Can you guys explain this to me.... Several times I've noticed miner is switching from DAG epoch 329 to 'Generating DAG epoch #0'. I have a mix of 1070, 1060 and 104-100 cards. My 1070 cards are doing 32+ MHs for a short time then miner is restarting with DAG epoch 329 and cards are doing about 27MHs. I understand it's slowing down with bigger DAG but what is DAG for epoch #0.

2020.03.03:15:55:49.480: GPU4 GPU4: Starting up... (0)
2020.03.03:15:55:49.531: GPU6 GPU6: Starting up... (0)
2020.03.03:15:55:49.542: GPU5 GPU5: Starting up... (0)
2020.03.03:15:55:49.561: GPU3 GPU3: Starting up... (0)
2020.03.03:15:55:49.585: GPU2 GPU2: Starting up... (0)
2020.03.03:15:55:49.600: GPU8 GPU8: Starting up... (0)
2020.03.03:15:55:49.708: GPU1 GPU1: Starting up... (0)
2020.03.03:15:55:50.463: GPU7 Light cache generated in 1.0 s (15.4 MB/s)
2020.03.03:15:55:50.463: GPU7 GPU7: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU4 GPU4: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU6 GPU6: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU5 GPU5: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU3 GPU3: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU2 GPU2: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU8 GPU8: Generating DAG for epoch #0
2020.03.03:15:55:50.465: GPU1 GPU1: Generating DAG for epoch #0
.
.
2020.03.03:15:56:00.753: main GPUs: 1: 31.981 MH/s (29) 2: 32.471 MH/s (31) 3: 32.563 MH/s (27) 4: 23.654 MH/s (27) 5: 32.588 MH/s (31) 6: 40.112 MH/s (46) 7: 40.876 MH/s (42) 8: 23.580 MH/s (34)

It's nicehash pool? If so - nicehash can switch on the fly between different eth forks, so it can change DAG's. DAG #0 - is one of this switches to some fork untill it give better profit.

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 293. (Read 784857 times)