Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 297. (Read 784965 times)
February 14, 2020, 05:13:47 PM
Working with amd 20.2.1 drivers?
February 14, 2020, 08:05:49 AM
Is there anyway to set a timer?
for instance:
hydro peak time, set to lower power to gpu.
hydro off peak to increase power to gpu.
Is this feature available, or a future feature to be implemented?
Thanks
for instance:
hydro peak time, set to lower power to gpu.
hydro off peak to increase power to gpu.
Is this feature available, or a future feature to be implemented?
Thanks
I use AwesomeMiner to set rules to do all of that. You can set conditions (time) that the miners will change algorithms, clock speeds, even stop/start. Pretty handy if you have multiple machines too because you can have one machine (that doesn't mine) control all of the machines that do. I believe some of the mining OS (such as Hive) does something similar but I'm not sure.
February 12, 2020, 11:28:55 PM
Is there anyway to set a timer?
for instance:
hydro peak time, set to lower power to gpu.
hydro off peak to increase power to gpu.
Is this feature available, or a future feature to be implemented?
Thanks
for instance:
hydro peak time, set to lower power to gpu.
hydro off peak to increase power to gpu.
Is this feature available, or a future feature to be implemented?
Thanks
February 11, 2020, 12:15:44 PM
When 5.0 version?
Why you need newer version, the miner works perfectly?
The miner works not perfectly, there is an issue present. Also waiting for a fixed version.
February 11, 2020, 07:54:40 AM
hi gyus.
i have a mixed rig with 4* nitro+ 488 (Samsung), 1*5700 ASROCK Challenger, 2*1070 JS.
when i had the old config with 1*488, 1*5700, 2*1070 all worked perfect.
now, i added the 488 cards, and the miner can hang all the system. it can be after 2 minutes of mining, or after 2 days.
tryed on stock clocks - same problem.
MB - asus p8z77-lk
i5 3570
4*4 gb (2*hynix, 2*patriot)
ssd 60gb
risers
splitter 1 pci - 4 pci
with claymore - all worked fine, but i don't like claymore
thanks.
i have a mixed rig with 4* nitro+ 488 (Samsung), 1*5700 ASROCK Challenger, 2*1070 JS.
when i had the old config with 1*488, 1*5700, 2*1070 all worked perfect.
now, i added the 488 cards, and the miner can hang all the system. it can be after 2 minutes of mining, or after 2 days.
tryed on stock clocks - same problem.
MB - asus p8z77-lk
i5 3570
4*4 gb (2*hynix, 2*patriot)
ssd 60gb
risers
splitter 1 pci - 4 pci
with claymore - all worked fine, but i don't like claymore
thanks.
February 10, 2020, 06:43:28 PM
When 5.0 version?
What s the point of your comment ?! February 10, 2020, 03:18:11 PM
1 day running with a GTX 1080 Ti @ 21 MH/s and I have 410/0/0 shares. I use Coinbase as my wallet, but when do I receive the payout?
Pool = ssl://eu1.ethermine.org:5555
Pool = ssl://eu1.ethermine.org:5555
What is your payout threshold at the pool set to? Lowest for ETH is .05.
At 21MH gonna guess 600+ hours to get .05
February 07, 2020, 07:01:48 PM
Hello everyone
I have a problem with showing GPU temperature and fan speed
I've been using Phoenixminer on my rig with 6x GTX 1070 and GTX 106-100 for a while and it's worked fine so far.
I use Phoenixminer v4.9c, MSI Afterburner 4.6.2, Windows 10
Now I use old Nvidia drivers (concretely 430.86 ) but when I put in new drivers ( i tried with 441.66, 441.87 and 442.19 )
Phoenixminer starts working fine but does not show me the GPUs temperature and fan speed Sad
When I run Phoenixminer with new drivers I'm getting the message " NVIDIA NVML library not found, temperature monitoring for NVIDIA GPUs disabled "
When I restore old drivers everything is back to normal, again I see GPUs temperatures and fan speed
Why I dont have the GPUs temperature and fan speed ?
Where am I doing wrong ? what's the problem ?
Please help
You put 2 files ( other folder from Phoenix's download page, NVRTC) imto miner folder?
February 07, 2020, 12:00:42 PM
When 5.0 version?
Why you need newer version, the miner works perfectly?
February 07, 2020, 10:21:54 AM
When 5.0 version?
February 06, 2020, 12:33:05 PM
Hello everyone
I have a problem with showing GPU temperature and fan speed
I've been using Phoenixminer on my rig with 6x GTX 1070 and GTX 106-100 for a while and it's worked fine so far.
I use Phoenixminer v4.9c, MSI Afterburner 4.6.2, Windows 10
Now I use old Nvidia drivers (concretely 430.86 ) but when I put in new drivers ( i tried with 441.66, 441.87 and 442.19 )
Phoenixminer starts working fine but does not show me the GPUs temperature and fan speed Sad
When I run Phoenixminer with new drivers I'm getting the message " NVIDIA NVML library not found, temperature monitoring for NVIDIA GPUs disabled "
When I restore old drivers everything is back to normal, again I see GPUs temperatures and fan speed
Why I dont have the GPUs temperature and fan speed ?
Where am I doing wrong ? what's the problem ?
Please help
February 05, 2020, 03:52:29 PM
My results with 5700: https://youtu.be/0NfqtrsILYY
You must test the mem settings stable for 2-3 days first. The pulse card is one of the better.It's working stable a few days already.
February 05, 2020, 03:34:30 PM
Is anyone going to address the multi GPU MCLOCK crash bug any time soon?
February 04, 2020, 03:20:05 PM
1 day running with a GTX 1080 Ti @ 21 MH/s and I have 410/0/0 shares. I use Coinbase as my wallet, but when do I receive the payout?
Pool = ssl://eu1.ethermine.org:5555
Pool = ssl://eu1.ethermine.org:5555
February 04, 2020, 12:11:48 PM
Hi.
I have a problem with strap settings (-mt value) - the miner can't set the timings
-----------------------------------------------
GPU0: Unable to set VMEM timing to 2 - error: -8
GPU1: Unable to set VMEM timing to 2 - error: -8
GPU2: Unable to set VMEM timing to 2 - error: -8
-----------------------------------------------
Rig is on AMD RX570 8Gb, under Win10, driver 18.3.4 (tried the 19.12.3 as well). Phoenix 4.9c
Miner is running via "Run as admin..."
Any thoughts, what can be an issue?..
I have a problem with strap settings (-mt value) - the miner can't set the timings
-----------------------------------------------
GPU0: Unable to set VMEM timing to 2 - error: -8
GPU1: Unable to set VMEM timing to 2 - error: -8
GPU2: Unable to set VMEM timing to 2 - error: -8
-----------------------------------------------
Rig is on AMD RX570 8Gb, under Win10, driver 18.3.4 (tried the 19.12.3 as well). Phoenix 4.9c
Miner is running via "Run as admin..."
Any thoughts, what can be an issue?..
So, looks like -mt parameter is broken in current version. It's doesn't work on any of the rig (tried only win, linux is not tested). Or there is some trick needed for win10, which is not described in miner's documentation
Hope, this will be fixed in future releases.
February 03, 2020, 05:30:04 PM
With RX 5700 it is better to use old drivers? Newest seems to degrade some percentage?
What are you currenty using and can yu share your settings?
What are you currenty using and can yu share your settings?
19.11.3 is the best driver?
February 03, 2020, 05:28:14 PM
My results with 5700: https://youtu.be/0NfqtrsILYY
You must test the mem settings stable for 2-3 days first. The pulse card is one of the better. February 03, 2020, 04:17:48 PM
My results with 5700: https://youtu.be/0NfqtrsILYY
February 03, 2020, 01:22:52 PM
Quote
Why put your miner in C:\Windows\system32 directory? If its NOT there, then you have to add directory where you put it into PATH variable, or,
better yet, start it from its own directory
Another problem could be that its not where you think it should be because your AV erased it
But is in my Download folder and Antivirus is off?
If its in your downloads folder, then why youre starting it like C:\Windows\system32>PhoenixMiner.exe
It should look like C:\Downloads>PhoenixMiner.exe or more probably C:\Users\(put your user here)\Downloads>PhoenixMiner.exe
Fixed: tried, but same problem. So I added a command line in the bat-file:
REM
REM Example bat file for starting PhoenixMiner.exe to mine ETH
REM
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
SET "PATH=C:\PhoenixMiner_4.9c_Windows;%PATH%"
REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x099b7f4e5E2f5ecEB1cdf56497A5fF429AB1F841.Rig013182
pause
Thanks for your help!
February 03, 2020, 01:19:21 PM
Quote
Why put your miner in C:\Windows\system32 directory? If its NOT there, then you have to add directory where you put it into PATH variable, or,
better yet, start it from its own directory
Another problem could be that its not where you think it should be because your AV erased it
But is in my Download folder and Antivirus is off?
If its in your downloads folder, then why youre starting it like C:\Windows\system32>PhoenixMiner.exe
It should look like C:\Downloads>PhoenixMiner.exe or more probably C:\Users\(put your user here)\Downloads>PhoenixMiner.exe
Jump to: