Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 294. (Read 784965 times)

Can you guys explain this to me.... Several times I've noticed miner is switching from DAG epoch 329 to 'Generating DAG epoch #0'. I have a mix of 1070, 1060 and 104-100 cards. My 1070 cards are doing 32+ MHs for a short time then miner is restarting with DAG epoch 329 and cards are doing about 27MHs. I understand it's slowing down with bigger DAG but what is DAG for epoch #0.


2020.03.03:15:55:49.480: GPU4 GPU4: Starting up... (0)
2020.03.03:15:55:49.531: GPU6 GPU6: Starting up... (0)
2020.03.03:15:55:49.542: GPU5 GPU5: Starting up... (0)
2020.03.03:15:55:49.561: GPU3 GPU3: Starting up... (0)
2020.03.03:15:55:49.585: GPU2 GPU2: Starting up... (0)
2020.03.03:15:55:49.600: GPU8 GPU8: Starting up... (0)
2020.03.03:15:55:49.708: GPU1 GPU1: Starting up... (0)
2020.03.03:15:55:50.463: GPU7 Light cache generated in 1.0 s (15.4 MB/s)
2020.03.03:15:55:50.463: GPU7 GPU7: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU4 GPU4: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU6 GPU6: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU5 GPU5: Generating DAG for epoch #0
2020.03.03:15:55:50.463: GPU3 GPU3: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU2 GPU2: Generating DAG for epoch #0
2020.03.03:15:55:50.464: GPU8 GPU8: Generating DAG for epoch #0
2020.03.03:15:55:50.465: GPU1 GPU1: Generating DAG for epoch #0
.
.
2020.03.03:15:56:00.753: main GPUs: 1: 31.981 MH/s (29) 2: 32.471 MH/s (31) 3: 32.563 MH/s (27) 4: 23.654 MH/s (27) 5: 32.588 MH/s (31) 6: 40.112 MH/s (46) 7: 40.876 MH/s (42) 8: 23.580 MH/s (34)

BIOS modded timings RX5700 - 58-50 mh/s
https://www.youtube.com/watch?v=d-AwOPJQH_4&t

Is there any possibility that HNS will be added to dual mining?

Those of you with Rx5700 and 5700xt, what am I doing wrong or how are you guys able to achieve 53mhs at 85 watts.  I have the following parameters in Phx 4.9c and get 52.7mhs at 125 watts using a kilo-watt meter:

-cclock 1300 -mclock 1825-cvddc 715 -powlim 30 -mi 12

Don't get how you guys are able to get power consumption below 100 watts.  Fill me in please.

PHOENIXTEAM

In your newest version software the EXP (Expanse) coin devfee mining pool is not working. It's make me lot of missing time in my mining. Please check all devfee pool and repair this in an update version.

Thanks,
RaptorMAN

i don't know what language you are speaking in that channel, can you share more info about the 60mh @ETH?, i tried the red panda miner settings and i was achieving 60mhs but with a lot of incorrect shares

Also with my XFX 5700 DD (non XT) i'm at 53.3 mhs @ 94w using phoenix miner:

-cclock 1300 -mclock 1830 -cvddc 710 -powlim 30 -amd -acm -mode 1 -clKernel 1 -clNew 1 -mi 12 -mt 2 -wdog 1 -hstats 2 -gt 36


Best of success guys!

@patrike
I cant more start Awesome Miner v 7.3.6 main program.
Win10 pro 1909, today updated .NET

02.03.2020 06:42:21.482 [001] [E]Unhandled Domain Exception
02.03.2020 06:42:21.482 [001] [E]System.ArgumentNullException: Value cannot be null.
Parameter name: v1
02.03.2020 06:42:21.482 [001] [E]   at System.Version.op_LessThan(Version v1, Version v2)
   at AwesomeMiner.Infrastructure.Entities.Engines.EngineInfoPlatform.GetEngineInfoVe rsion(EngineAlgorithmSettings engineSettings, String fallbackComputeVersion, Boolean fallbackToFirst)
   at AwesomeMiner.Infrastructure.Entities.Engines.EngineInfoManager.GetEngineInfoFor Platform(EngineAlgorithmSettings engineSettings, String fallbackComputeVersion, Boolean isWindows)
   at AwesomeMiner.Infrastructure.Entities.Engines.SoftwareDefinitionManager.GetEffec tiveEngineInfo(String engineType, ManagedCompatibilityMode& compatibilityMode, Boolean useTransaction, Nullable`1 isWindows)
   at AwesomeMiner.Infrastructure.Entities.Engines.SoftwareDefinitionManager.Init()

PM with full log sent.
reinstall, repair of AM and .NET  not help,   sfc/ scannnow find nothing

need your help guys...

I was able to get 63MH/s but was getting nearly 50% incorrect share rate. So I had to slow the clocks back down and stay stable with 0 incorrect shares around 52Mh/s with my 5700s. I haven't looked at that channel yet but I was using some suggestions from Red Panda Miner on Youtube to get 63MH/s. If their version is stable with 0 incorrect share, it might be worth it but unless someone can send in a screenshot of it I think the best the cards are capable will be 53MH/s.

Isn't this unstable with lots of rejects?

Hi guys
I try to use Phoenix 4.9c on Linux (Hive) but i get error:

Unable to load NVRTC. Please check your Nvidia drivers
GPU1: Allocating DAG (1.24) GB; good for epoch up to #31
CUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU1 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
GPU2: Allocating DAG (1.24) GB; good for epoch up to #31
CUDA error in CudaProgram.cu:373 : invalid device context (201)
GPU2 initMiner error: invalid device context
Unable to load NVRTC. Please check your Nvidia drivers
GPU3: Allocating DAG (1.24) GB; good for epoch up to #31
CUDA error in CudaProgram.cu:373 : invalid device context (201)


How to solve? Thanks

Hi man this is AMD Navi timings soft in telegramm chanel - https://t.me/newsminers RX5700 - 60mh a ETH

Hello there, i'm testing a rx 5700 XT and a rx 5700, the XT get cclock drops to 700mhz lowering the hashrate from 52-53 to 30-35, sometimes is random.. i tried the stock settings and others settings from the forum and youtube, still the same problem.

Also do you guys know if the AMD adrenaline software has the feature for compute mode?, i can't find it.

Good luck miners!

dwarfpool fee error. do you solve this trouble?

Thank you. This works for 4gb vRam GPUs.

I highly recommend adding it to your configuration file.

I've changed to simplemining instead of mining in Windows due to the allocation of vram.
I'm using the same clock settings as in windows and the same hardware.

All my RX470 is hashing 29mhs now, but they did 31,4mhs in Windows 10.
Is linux slower than Windows?

i wish you help me is not difficult to guide me please

have 5 gpu RX 570 8gb

i used in .bat


hash 130+ mh/s to 135
i hide my wallet now what i have to do ? have rxboost or anythig else

note compute enabled

Im getting this error:

GPU1: not enough VRAM for DAG epoch 329

I think because for mining TC in Nicehash, the 4Gb ram of gpus are insufficient. Any way for dont mine ETC in NH and only mining ETH?

Regards.

EDIT: I solved with -rvram -1

Thank you, my six rx550 are ok with this

So I fixed my issue, i tried it before I posted this yesterday and that was to set the fan speed manually in hiveos but it originally came back with an error. After making this post I tried again and my AMD Vii cards have been purring away at around 70°C for the past 13 hours at a steady hash of 180 Mh/s so much more stable than claymore. Just hope when I add my RX580’s tonight they will work alongside my Vii as I had issues with claymore.

Many thanks to you.